Cut Sheet

ManualsBrandsRamset ManualsAnchors3/4" Mechanical Pin

WWW.RAMSET.COM

TRAKFAST STANDARD

FUEL/PIN PACK

1000 PINS AND 1 FUEL CELL PER BOX

For high volume, repetitive fastenings to concrete and steel such as drywall track to concrete

PART NUMBER PIN LENGTH DESCRIPTION

IN. (MM)

FPP012 1/2 (12.7) 1/2" Plated steel pin

FPP012S* 1/2 (12.7) 1/2" Premium Plated step shank pin

FPP034B 3/4 (19.1) 3/4" Black pin

FPP034S* 3/4 (19.1) 3/4" Premium Plated step shank pin

FPP100 1 (25.4) 1" Plated pin

FPP114 1-1/4 (31.8) 1-1/4" Plated Pin

SELECTION CHART

Shank diameter = .109

Head diameter = .250

* Shank diameter = .104/.118

* Head diameter = .250

TRAKFAST BREAKAWAY

STRIP FUEL/PIN PACK

1000 PINS AND 1 FUEL CELL PER BOX

Collation designed to breakaway on impact.

For high volume, repetitive fastenings to concrete such

as wood furring to concrete

PART NUMBER PIN LENGTH DESCRIPTION

IN. (MM)

FPP034T 3/4 (19.1) 3/4" Plated pin

FPP100T 1 (25.4) 1" Plated pin

FPP114T 1-1/4 (31.8) 1-1/4" Plated Pin

FPP112T 1-1/2 (38.1) 1-1/2" Plated Pin

Shank diameter = .109

Head diameter = .250

T3MAG FUEL/PIN PACK

1000 PINS AND 1 FUEL CELL PER BOX

Larger .125 shank diameter offers improved success rate (15 pin strip)

PART NUMBER PIN LENGTH DESCRIPTION

IN. (MM)

T3012 1/2 (12.7) 1/2" steel pin with T3 fuel cell

T3012S 1/2 (12.7)

1/2" premium steel pin with T3 fuel cell

T3034B 3/4 (19.1) 3/4" concrete pin with T3 fuel cell

T3034S* 3/4 (19.1) 3/4" step shank pin with T3 fuel cell

T3100 1 (25.4) 1" concrete pin with T3 fuel cell

Shank diameter = .125 *Shank diameter= .104/.125

Head diameter = .250

Ramset Collated Gas Tool Fasteners are speciﬁcally engineered for optimal

performance in Ramset Gas Power Tools using fastener magazines.

GAS TOOL FASTENERS

1000 PINS A

3MA

Sold in master cartons of 5000 minimum. Cartons cannot be split.

Summary of content (5 pages)

PAGE 1
GAS TOOL FASTENERS Ramset Collated Gas Tool Fasteners are speciﬁcally engineered for optimal performance in Ramset Gas Power Tools using fastener magazines. SELECTION CHART TT3MAG FUEL/PIN PACK T3MA 1000 PINS AND A 1 FUEL CELL PER BOX Larger .125 shank diameter offers improved success rate (15 pin strip) PART NUMBER T3012 T3012S T3034B T3034S* T3100 Shank diameter = .125 Head diameter = .250 PIN LENGTH IN. (MM) 1/2 1/2 3/4 3/4 1 (12.7) (12.7) (19.1) (19.1) (25.
PAGE 2
GAS TOOL FASTENERS PLY138 TRAKFAST PLYWOOD PIN P PL FOR ATTACHING ATTA PLYWOOD TO METAL STUDS • Fastener Length: 1-3/8" • Shank Diameter: .100 dia. (before knurl) • Can Be Used With: Wood Sheathings: 3/8", 1/2", 5/8", 3/4" Steel Stud Gauges: 16, 18, 20 • Head Diameter: .250 • Helical Knurled Shank • Mechanical Zinc Plated ADVANTAGES 1000 pins and 1 fuel cell per box VS SCREWS • 3 - 5 times faster than screw installation. No worrying about electrical cords.
PAGE 3
GYPFAST TOOL FASTENERS GAS TOOL FASTENERS SELECTION CHART GYPFAST GY PART NO. P PA FASTENER DESCRIPTION .140" DIA. KNURLED SHANK 5/16" DIA. BUGLE HEAD MASTER CARTON QUANTITY MASTER CARTON WEIGHT APPLICATIONS GF112 1-1/2" (38mm) 6,000 nails/ctn (40- 150 ct. coils) 6 fuel cells 37 lbs. Single Layer of Exterior Sheathing, Wood Furring and Blocking GF200 2" (51mm) 4,800 nails/ctn (32 - 150 ct. coils) 5 fuel cells 38 lbs.
PAGE 4
T3SS ELECTRICAL ACCESSORIES GAS TOOL FASTENERS (Pre-assembled, Single-Shot) The fasteners are designed for use in Ramset Single-Shot Gas Tools (R150, T3SS) SELECTION CHART For suspended ceilings, piping and other items using 1/4" or 3/8" THREADED ROD HANGER threaded rod. Fastener is pre-assembled to a 16 gage threaded rod hanger. 100 per jar. UL PART NUMBER DESCRIPTION 14TRHMP034 1/4" Rod hanger with 3/4" plated pin 38TRHMP034 3/8" Rod hanger with 3/4" plated pin Shank diameter = .104/.
PAGE 5
GAS TOOL FASTENERS (Pre-assembled, Single-Shot) SELECTION CHART Used to install temporary lighting and secure low voltage cable to concrete, uses a standard cable tie up to 3/8" in TTIE IE STRAP STRAP HOLDER width. Fastener is pre-assembled to a 22 gage tie strap holder. 50 per jar. PART NUMBER DESCRIPTION TSHMP034 Tie strap holder with 3/4" plated pin Shank diameter = .104/.125 Head diameter = .