Operating instructions

DISASSEMBLY
14
DISASSEMBLY
TOOL DISASSEMBLY
1. Rotate the barrel retention clip off of the
pawl using a flat blade screwdriver or
the point of a long fastener.
2. Remove the pawl by lifting it up and
away from the tool body.
3. Slide the front barrel assembly out of
the tool body.
4. Unseat and remove the shear clip by
prying it up with a flat blade screwdriver
or fastener point. Remove the clip from
the barrel by prying it up and away from
the groove in the barrel. Use care to
keep the clip from flying free when it is
removed.
5. Separate the front barrel and guide
from the rear barrel assembly.
ROTATE THE BARREL RETENTION
CLIP AWAY FROM PAWL
REMOVE THE PAWL
REMOVE THE BARREL ASSEMBLY
REMOVE THE SHEAR CLIP
SEPARATE THE FRONT BARREL
FROM THE REAR BARREL