MSDS

ManualsBrandsRamset ManualsTools & HardwareCobra+ Combo Kit

MSDS # 00055.0001

MATERIAL

SAFETY DATA

SHEET

Olin MSDS No.:

00055.0001

Revision No.: 21

Revision Date:

7/30/14

Supercedes: 2/21/14

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name:

CARTRIDGES FOR POWER DEVICES

Chemical Name:

Mixture – Metal Alloy

Synonyms:

Centerfire Powertool Loaded Round, Rimfire Cartridge for Power Device, 22, 25, 27, 32, 38 Caliber

Powertool Round, Power Load, Blank Power Load and/or Booster, Powder Load

Chemical Family:

Metal mixture

Formula:

Not applicable - mixture

Product Use/ Description:

Centerfire Powertool Loaded Round

COMPANY ADDRESS

MSDS Control Group

Olin Corporation

Winchester Division, Inc.

600 Powder Mill Road

East Alton, IL 62024-1197

www.winchester.com

TECHNICAL

INFORMATION:

618-258-3507

EMERGENCY TELEPH

ONE NUMBER:

US/Canada: 1-800-424-9300

Outside US/Canada: 703-527-3887

Customer #: ccn24728

2. COMPOSITION / INFORMATION ON INGREDIENTS

CAS Number

Components

% By Weight

EINECS/ ELINCS #

EU Classification

Symbol

Phrase

7439-89-6 Iron 0 – 97 231–096-4 None None

7440-50-8 Copper 50 - 65 231-159-6 None None

7440-66-6 Zinc 15 - 32 231-175-3 F (as dust or

powder)

R 15-17

9004-70-0 Nitrocellulose 7 - 13 Not listed E* R 1-3

55-63-0 Nitroglycerin 0.5 - 2 200-240-8 E, T+, N R 3-26/27/28-33-

51-53

15245-44-0 Normal Lead

styphnate

0.1 - 1 239-290-0 E, T, N R61-3-20/22-33-

50/53-62

*This material is not listed in Annex 1 of Directive 88/379/EEC. Olin has classified the material according to the conventional method based

upon information from similar materials.

OSHA REGULATORY STATUS: Explosive

3. HAZARDS IDENTIFICATION

CAUTION!

EXPLOSIVE. KEEP AWAY FROM HEAT. DO NOT SUBJECT TO MECHANICAL SHOCK. PARTICLES FROM FIRING MAY BE

HARMFUL IF INHALED. DO NOT TAKE INTERNALLY.

HAZARD RATINGS (for dus

t or fume)

Degree of hazard (0 = low, 4 = extreme)

Hazardous Materials Identification System (HMIS) Health: 0 Flammability: 0 Physical Hazard:

Explosive: 2

National Fire Protection Association (NFPA) Mixture. Not rated.

HUMAN THRESHOLD RESPONSE DATA

Odor Threshold: Unknown

Irritation Threshold: Unknown

Immediately Dangerous to Life or Health (IDLH) Value(s): The IDLH for this product is not known. The IDLH for copper and lead

is 100 mg/m

. The IDLH for nitroglycerin is 75 mg/m

POTENTIAL HE

ALTH EFFECTS

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Olin MSDS No.: 00055.0001 Revision No.: 21 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Chemical Name: Synonyms: Chemical Family: Formula: Product Use/ Description: COMPANY ADDRESS 2.
PAGE 2
Page 2 of 6 This product is composed of a finished metal alloy cartridge which contains the various components completely sealed within. Therefore, under normal handling of this product, no exposure to any harmful materials will occur. When the product is fired, a small amount of particles may be generated which may be slightly irritating to the eyes and the respiratory tract.
PAGE 3
Page 3 of 6 CONDITIONS TO AVOID: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION CAS # CHEMICAL NAME 7440-50-8 Copper 7440-66-6 9004-70-0 55-63-0 Zinc Nitrocellulose Nitroglycerin 15245-44-0 Lead styphnate ENGINEERING CONTROLS: EYE / FACE PROTECTION: SKIN PROTECTION: RESPIRATORY PROTECTION: GENERAL HYGIENE: 9. ACGIH TLV OSHA PEL INTERNATIONAL OELS 0.2 mg/m3 (fume), 1 mg/m3 (dusts and mists) 0.1 mg/m3 (fume) 1 mg/m3 (dusts and mists) None established None established 0.05 ppm (0.
PAGE 4
Page 4 of 6 11. TOXICOLOGICAL INFORMATION POTENTIAL EXPOSURE ROUTES: The physical nature of this product makes absorption from any route unlikely. A small amount of inhalable particles may be created when projectile is fired. ACUTE ANIMAL TOXICITY DATA: For Product: For Components Oral LD50 Not applicable for product Dermal LD50 Not applicable for product Inhalation LC50 Not applicable for product. Particles generated from firing may be slightly toxic. Not a skin or eye irritant as a loaded round.
PAGE 5
Page 5 of 6 13. DISPOSAL CONSIDERATIONS Care must be taken to prevent environmental contamination from the use of this material. The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes. 14. TRANSPORT INFORMATION U.S. DOT RID/ADR PROPER SHIPPING NAME: HAZARD CLASS: UN NO.
PAGE 6
Page 6 of 6 CANADIAN REGULATIONS DSL LIST: IDL: WHMIS: 16. The components of this product are on the DSL or are exempt from reporting under the New Substances Notification Regulations. Copper This product is not subject to WHMIS. It is regulated as a Class 6 Explosive in Canada.