Instructions / Assembly

A1-30pcs A2-8pcs B1-4pcs B2-4pcs B3-2pcs B4-6pcs B5-8pcs C-4pcs D1-4pcs D2-4pcs E-4pcs F-1pc

10x40mm 8x40mm 5x100mm 5x90mm 4x40mm 6x40mm 8x45mm M12x100 M12 M12 M12

G-1pc 2+2pcs

Ø 19 mm

Assembly Instructions - PRO-AN

Attention:

Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life

of the bench.

NOTICE:

•The bench must not be left in damp or humid conditions which will cause movement in the wood.

Recommended humidity level max. 60%.

Packing 1 Packing 2 DateParts

Recommended humidity level max. 60%.

•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless

varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture.

Don´t forget to repeat surface treatment each 6 months including holes for bench dogs.

•To increase the stability of your workbench we recommend you to bolt the bench to the floor.

•Each 6 months tighten all screws and bolts.

Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz

PAGE 1
Assembly Instructions - PRO-AN A1-30pcs A2-8pcs B1-4pcs B2-4pcs B3-2pcs B4-6pcs B5-8pcs C-4pcs D1-4pcs D2-4pcs E-4pcs 10x40mm 8x40mm 5x100mm 5x90mm 4x40mm 6x40mm 8x45mm M12x100 M12 M12 M12 G-1pc 2+2pcs F-1pc Attention: Ø 19 mm Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life of the bench. NOTICE: •The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended humidity level max. 60%.
PAGE 2
1) Frame assembly !!! HINT !!! - don´t glue dowels for stretchers, you will not be able to use optional cupboard in future. X = holes for stretchers if cupboard is used !!!! Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 3
2) Drawer assembly 4) Vices attaching 5) Bench top and drawer attaching Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.
PAGE 4
5) Bench top and drawer attaching Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.