User guide

iPod
®
/USB/MP3 CONTROL
• There are many ways to play music from iPod
®
players or other portable
devices through your vehicle's speakers.
• The USB port located inside the
upper glove box, allows you to plug
an iPod
®
into the vehicle's sound
system.
• To hear audio from devices
connected to this port from a
non-touch-screen radio, press the
AUX button on the radio faceplate.
From a touch-screen radio, press the
MEDIA hard-key, then touch the AUX
or iPod
®
soft-key.
• When connected to this feature:
• The iPod
®
audio can be played on the vehicle’s sound system.
• The iPod
®
can be controlled using the radio buttons to Play, Browse, and
List the iPod
®
or external devices contents. Refer to the Owner's Manual on
the DVD for details.
• The iPod
®
battery charges when plugged into the USB port (if supported by
the specific audio device).
NOTE:
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone
®
devices.
The USB port also supports playing music from compatible external USB Mass
Storage Class memory devices. For supported audio file formats, refer to the
USB Port section on the Owner's Manual on the DVD. Refer to
www.ramtrucks.com/uconnect website for a list of tested iPod
®
s. Some iPod
®
software versions may not fully support the USB port features. Please visit
Apple’s website for iPod
®
software updates.
WARNING!
Do not plug in or remove the iPod
®
or external device while driving. Failure
to follow this warning could result in a collision.
Uconnect™ Phone
• To determine if your vehicle is equipped with Uconnect™ Phone, press the
“Uconnect™ Phone” button
. If your vehicle has this feature, after a couple
seconds you will hear a voice prompt. If not, you will see a message on the
radio “Uconnect phone not available”.
• The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle
communications system with Voice Command Capability (see Voice Command
section).
ELECTRONICS
44