2012 RAM TRUCK Gas 1500/2500/3500 Chrysler Group LLC 12D241-126-AA 875256 Ram Truck Gas OM cover.indd 1 First Edition 2012 O W N E R ’ S MA N UA L Ram Truck Gas 1500/2500/3500 Printed in U.S.A.
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non-drinking driver, call a cab, a friend, or use public transportation.
SECTION TABLE OF CONTENTS PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2 3 UNDERSTANDING THE FEATURES OF YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 3 4 UNDERSTANDING YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 1 CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Van Conversions/Campers . . . . . . . . . . . . . . . . . 6 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 4 䡵 Vehicle Identification Number .............. 6 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 6 䡵 Vehicle Modifications/Alterations . . . . . . . . . . . .
4 INTRODUCTION INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents.
INTRODUCTION 5
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all Warnings and Cautions. also be supplied with your vehicle.
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Vehicle Identification Number NOTE: It is illegal to remove or alter the VIN.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2 CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ General Information . . . . . . . . . . . . . . . . . . . 18 ▫ Wireless Ignition Node (WIN) — If Equipped . . . . . . . . . . . . . . . . . . 12 䡵 Vehicle Security Alarm — If Equipped . . . . . . . . 19 ▫ Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ▫ Removing Key Fob From Ignition . . . . . . . . . . 14 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . .
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Lock The Doors . . . . . . . . . . . . . . . . . . . . 23 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 37 ▫ Using The Panic Alarm . . . . . . . . . . . . . . . . . 24 䡵 Occupant Restraints . . . . . . . . . . . . . . . . . . . . . 38 ▫ Programming Additional Transmitters . . . . . . 25 ▫ Lap/Shoulder Belts . . . . . . . . . . . . . . . . . . . . 41 ▫ Transmitter Battery Replacement . . . . . . . . . .
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Seat Belt Extender . . . . . . . . . . . . . . . . . . . . . 55 䡵 Engine Break-In Recommendations . . . . . . . . . . 84 ▫ Supplemental Restraint System (SRS) — Air 䡵 Safety Tips . . . . . . . . . . . . . . . . Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ▫ Transporting Passengers . . . . . ▫ Air Bag System Components . . . . . . . . . . . . . 57 ▫ Exhaust Gas . . . . . . . . . . . . . . ▫ Advanced Front Air Bag Features . . . . . . .
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Key Fob with Remote Keyless Entry (RKE) — If Equipped Your vehicle may use a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the Key Fob into the ignition switch with either side up. Standard Blade Ignition Key — If Equipped Your vehicle may use a standard blade key ignition system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired position. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To remove the emergency key, slide the mechanical latch Removing Key Fob From Ignition at the top of the Key Fob sideways with your thumb and Place the shift lever in PARK (if equipped with an automatic transmission). Turn the Key Fob to the OFF then pull the key out with your other hand. position and then remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information. CAUTION! • If your vehicle battery becomes low or dead, your Key Fob will become locked in the ignition. • Do not attempt to remove the Key Fob while in this condition, damage could occur to the Key Fob or ignition module. Only remove the emergency key for locking and unlocking the doors.
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 NOTE: A Key Fob that has not been programmed is also considered an invalid key. CAUTION! The Sentry Key威 Immobilizer system is not compatDuring normal operation, after turning on the ignition ible with some after-market remote starting systems. switch, the Vehicle Security Light will turn on for three Use of these systems may result in vehicle starting seconds for a bulb check. If the light remains on after the problems and loss of security protection.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! Always remove the Sentry Keys威 from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of Key Fobs.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 VEHICLE SECURITY ALARM — IF EQUIPPED The Vehicle Security Alarm monitors the vehicle doors and ignition for unauthorized operation. When the Vehicle Security Alarm is activated, interior switches for door locks are disabled. The system provides both audible and visible signals, for the first three minutes the horn will sound and the headlights will turn on, the park lamps and/or turn signals will flash and Vehicle Security Light will flash repeatedly.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Alarm will also disarm if a programmed Sentry Key威 is inserted into the ignition switch. To exit the alarming mode, press the RKE transmitter UNLOCK button, or insert a programmed Sentry Key威 into the ignition switch. The Vehicle Security Alarm is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • The illuminated entry system will not operate if the dimmer control is in the “dome defeat” position (extreme bottom position). 2 REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED The RKE system allows you to lock or unlock the doors and activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a Key Fob with RKE transmitter. The transmitter does not need to be pointed at the vehicle to activate the system.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seconds to unlock all doors. The turn signal lights will than ten seconds. Then, press and hold the UNLOCK flash to acknowledge the unlock signal. The illuminated button while still holding the LOCK button. entry system will also turn on. 2. Release both buttons at the same time. Remote Key Unlock, Driver Door/All Doors First 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Flash Lamps With Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)” in “Understanding Your Instrument Panel” for further information. 3.
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)” in “Understanding Your Instrument Panel” for further information. 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 The Panic Alarm will stay on for three minutes unless Transmitter Battery Replacement you turn it off by either pressing the PANIC button a The recommended replacement battery is one CR2032 second time or drive the vehicle at a speed of 5 mph battery. (8 km/h) or greater. NOTE: • Perchlorate Material — special handling may apply. NOTE: • The interior lights will turn off if you turn the ignition See www.dtsc.ca.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. To assemble the RKE transmitter case, snap the two If your RKE transmitter fails to operate from a normal distance, check for these two conditions: halves together. 1. A weak battery in the RKE transmitter. The expected General Information This device complies with Part 15 of the FCC rules and life of the battery is a minimum of three years. RSS 210 of Industry Canada. Operation is subject to the 2.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 How To Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in PARK • Doors closed • Hood closed • HAZARD switch off • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed from ignition switch • Battery at an acceptable charge level • RKE PANIC button not pressed • Fuel meets minimum requirement • System not disabled from previous remote start event • Vehicle theft alarm not active W
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar • Remote Start Aborted — Fuel Low • Remote Start Aborted — System Fault • Remote Start Disabled — Start Vehicle to Reset The EVIC message stays active until the ignition is turned to the ON/RUN position. • If an engine fault is present or fuel level is low, the vehicle will start and then shut down in 10 seconds. • The park lamps will turn on and remain on during Remote Start mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 message “Turn To On” will flash in the EVIC until you NOTE: To avoid unintentional shut downs, the system turn the ignition switch to the ON/RUN position. will disable the one time press of the REMOTE START button for two seconds after receiving a valid Remote • “Remote Start Active — Key To Run” will display in Start request. the EVIC until you insert and turn the key to ON/ To Exit Remote Start Mode And Drive The Vehicle RUN position.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Information Center (EVIC)/Customer-Programmable Features (System Setup)” in “Understanding Your Instrument Panel”. DOOR LOCKS Manual Door Locks Front and rear doors may be locked by moving the lock knob down or unlocked by moving the lock knob up. Front doors may be opened with the inside door handle without lifting the lock knob. Doors locked before closing will remain locked when closed. The emergency key will unlock the driver door lock on your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! (Continued) • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever. • Do not leave the key fob in or near the vehicle, and do not leave the ignition in the ACC or ON/RUN position. A child could operate power windows, other controls, or move the vehicle.
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door LOCK switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your Key Fob in the vehicle. Removing the Key Fob or closing the door will allow the locks to operate. A chime will sound if the Key Fob is in the ignition switch and a door is open, as a reminder to remove the Key Fob.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 2 Child-Protection Door Lock Location To use the system, open each rear door, use a flat blade screwdriver (or emergency key) and rotate the dial to engage and disengage the Child-Protection locks. When the system on a door is engaged, that door can only be opened by using the outside door handle even if the inside door lock is in the unlocked position. Child Lock Control WARNING! Avoid trapping anyone in a vehicle in a collision.
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WINDOWS • After setting the Child-Protection Door Lock system, Power Windows — If Equipped always test the door from the inside to make certain it is in the desired position. • For emergency exit with the system engaged, move the door lock switch to the UNLOCK position, roll down the window and open the door with the outside door handle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 The control on the left front door panel has UP-DOWN switches that give you fingertip control of all power windows. There is a single opening and closing switch on the front passenger door for passenger window control and on the rear doors of Quad Cab威, Mega Cab威 and Crew Cab models.
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the window part way, press to the first detent conditions may trigger the auto reverse function unexpectedly during auto closure. If this happens, pull the and release it when you want the window to stop. switch lightly to the first detent and hold to close the Auto-Up Feature With Anti-Pinch Protection window manually.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window LOCKOUT Switch — 4–Door Models The window LOCKOUT switch on the driver’s door allows you to disable the window control on the rear passenger doors.
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE normal occurrence and can be minimized. If the rear • Supplemental Seat-Mounted Side Air Bags (SAB) — if windows are open and buffeting occurs, open the front equipped and rear windows together to minimize the buffeting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and Tether for CHildren (LATCH) feature also can be used to hold infant and child restraint systems. For more information on LATCH, refer to Lower Anchors and Tether for CHildren (LATCH). WARNING! Infants in rear facing child restraints should never ride in the front seat of a vehicle with a passenger Advanced Front Air Bag.
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a child from 1 to 12 years old (not in a rear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint. (Refer to “Child Restraints”) 5. If the air bag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center. Phone numbers are provided under ⴖIf You Need Assistanceⴖ.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 WARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air Bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • Supplemental Side Air Bag Inflatable Curtain (SABIC) and Seat-Mounted Side Air Bags (SAB) also need room to inflate. Do not lean against the door or window.
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE accident the belt will lock and reduce the risk of you striking the inside of the vehicle or being thrown out. WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of an accident best. • Two people should never be belted into a single seat belt.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 2. The seat belt latch plate is above the back of the front 3. When the belt is long enough to fit, insert the latch seat, next to your arm in the rear seat. Grasp the latch plate into the buckle until you hear a “click.” plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap.
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • A belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly. In a sudden stop you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in an accident. Removing Slack From Belt WARNING! • A lap belt worn too high can increase the risk of internal injury in an accident.
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. WARNING! A frayed or torn belt could rip apart in an accident and leave you with no protection.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Regular Cab Front Center Three Point Belt 1. The front center seat belt on the Regular Cab may be disconnected to open up utilization of the storage areas behind the front seats. The black latch plate can be detached from the black keyed seat belt buckle located on the inboard side of the passenger seat. Insert the seat belt tongue into the center red slot on the black buckle.
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • If the black latch and black buckle are not properly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in an accident. • When reattaching the black latch and black buckle, ensure the seat belt webbing is not twisted.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. In Use Position 3. Slide the latch plate upward over the folded webbing.
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front row outboard seats, the shoulder belt can be adjusted upward or downward to help position the belt away from your neck. Squeeze the anchorage button located on the upper belt guide to release the anchorage, and then move it up or down to the position that fits you best.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too loose or too high will apply crash forces to the abdomen, not to the stronger hip bones. In either case, the risk of internal injuries is greater. Wear a lap belt low and snug.
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the passenger seating position is equipped with an When To Use The Automatic Locking Mode Use the Automatic Locking Mode anytime a child safety ALR and is being used for normal usage: seat is installed in a seating position that has a belt with Only pull the belt webbing out far enough to comfortably this feature. Children 12 years old and under should wrap around the occupant’s mid-section so as to not always be properly restrained in the rear seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These devices are not a substitute for proper seat The BeltAlert威 warning sequence begins after the vehicle belt placement by the occupant. The seat belt still must be speed is over 5 mph (8 km/h), by blinking the Seat Belt Reminder Light and sounding an intermittent chime. worn snugly and positioned properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 BeltAlert威 can be enabled or disabled by your authorized Seat Belt Extender dealer. Chrysler Group LLC does not recommend deac- If a seat belt is too short even when fully extended, and the adjustable upper shoulder belt anchorage (if so tivating BeltAlert威. equipped) is in its lowest position, your authorized NOTE: Although BeltAlert威 has been deactivated, the dealer can provide you with a seat belt extender.
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) — Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air Bag is mounted in the center of the steering wheel. The passenger’s Advanced Front Air Bag is mounted in the instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the air bag covers.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The Advanced Front Air Bags have a multistage inflator This vehicle may also be equipped with Supplemental design. This allows the air bag to have different rates of Seat-Mounted Side Air Bags (SAB) to provide enhanced protection for an occupant during a side impact. If the inflation based on the severity and type of collision.
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Steering Wheel and Column • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 WARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional.
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only. Supplemental Side Air Bag Inflatable Curtain (SABIC) — If Equipped SABIC air bags may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. The system includes side impact sensors that are calibrated to deploy the side air bags during impacts that require air bag occupant protection. WARNING! • If your vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the location of the SABIC.
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Along with seat belts and pretensioners, Advanced Front Air Bags work with the knee bolsters to provide improved protection for the driver and front passenger. Side air bags also work with seat belts to improve occupant protection. Air Bag Deployment Sensors And Controls Advanced Front Air Bags are designed to provide additional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Also, the ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the Air Bag Warning Light will turn off.
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space between the occupant and the door. The SAB fully inflate in about 10 milliseconds.
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • • • • NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye WARNING! irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation • Modifications to any part of the air bag system continues, see your doctor. If these particles settle on could cause it to fail when you need it.
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), take the vehicle to your authorized dealer.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper air bag fuses. See your authorized dealer if the fuse is good.
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. WARNING! In a collision, an unrestrained child, even a tiny baby, can become a projectile inside the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 held in the vehicle by the lap/shoulder belt or the Infants And Child Restraints Safety experts recommend that children ride rearward- LATCH child restraint anchor system. Refer to “Lower facing in the vehicle until they are two years old or until Anchors and Tether for CHildren (LATCH)”. they reach either the height or weight limit of their rear WARNING! facing child safety seat.
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. These child seats are also held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. Refer to “Lower Anchors and Tether for CHildren (LATCH)”.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Here are some tips for getting the most out of your child Children Too Large For Booster Seats Children who are large enough to wear the shoulder belt restraint: comfortably and whose legs are long enough to bend • Before buying any restraint system, make sure that it over the front of the seat when their back is against the has a label certifying that it meets all applicable Safety seatback should use the lap/shoulder belt in a rear seat. Standards.
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Lower Anchors and Tether for CHildren (LATCH) Each vehicle is equipped with the child restraint anchorage system called LATCH, which stands for Lower Anchors and Tether for CHildren. The LATCH system provides for the installation of the child restraint without using the vehicle seat belt, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure.
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child restraint systems having attachments designed to NOTE: connect to the lower anchorages are now available. Child • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not restraints having tether straps and hooks for connection being used for occupant restraints are stowed and out to the seat back tether anchorage have been available for of reach of children. It is recommended that before some time.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Installing The Child Restraint System WARNING! Do not install child restraint systems equipped with LATCH mechanisms in the center position of a Quad Cab威 rear seat, or Crew Cab model with a bench rear seat. A child may be placed in the rear center seating position of a Quad Cab威, or Crew Cab bench model using the seat belt and child tether anchorage.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Installing a Child Restraint with an ALR: retractor to route it through the belt path of the child restraint. Slide the latch plate into the buckle until you 1. To install a child restraint with ALR, first, pull enough hear a “click.” of the seat belt webbing from the retractor to route it through the belt path of the child restraint. Slide the latch 2. Finally, pull on any excess webbing to tighten the lap plate into the buckle until you hear a “click.
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Regular Cab models have two tether anchorages, one Tether Anchorage Points At The Right And Center each behind the front center and right seats. Quad Cab威, Front Seat (Regular Cab - All Seats) Mega Cab威 and Crew Cab models have three anchor1. Place the child restraint on the seat and adjust the ages, one behind each of the rear seats.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Multiple Child Restraint Installation Sequence (Quad Cab威/Crew Cab/Mega Cab威 - Rear Seats) Mega Cab威 1. Place a child restraint on each outboard rear seat and adjust the tether strap so that it will reach under the head restraint to the tether anchor directly behind the seat.
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Lift the cover, and attach the hook to the square Quad Cab威/Crew Cab opening in the sheet metal. 1. The tether straps loops are located between the rear glass and the rear seat. There is a tether strap loop located behind each seating position. You can gain access to the center seating position tether strap loop by raising the head restraint and reaching between the rear glass and rear seat. Mega Cab威 Tether Strap Mounting 3.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 2. Place a child restraint on each outboard rear seat and adjust the tether strap so that it will reach under the head restraint, through the outboard tether strap loop, then route it to the tether strap loop located directly behind the center rear seat. 2 3. Pass each tether strap hook under the head restraint and through the loop of webbing behind the child seat. 4.
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in an accident. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 SAFETY TIPS Exhaust Gas Transporting Passengers NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. Safety Checks You Should Make Inside The Vehicle Seat Belts Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoperable. Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle.
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • If required, mounting posts must be properly installed, if not equipped from the factory.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ▫ Illuminated Vanity Mirror — If Equipped . . . 100 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 96 ▫ “Slide-On-Rod” Features Of Sun Visor — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 101 ▫ Automatic Dimming Mirror — If Equipped . . . 96 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . 97 ▫ Outside Mirrors Folding Feature . . . . . .
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Things You Should Know About Your Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . 121 ▫ General Information . . . . . . . . . . . . . . . . . . 132 䡵 Voice Command — If Equipped . . . . . . . . . . . 132 ▫ Voice Command System Operation . . . . . . . . 132 ▫ Commands . . . . . . . . . . . . . . . . . . . . . . . . 133 ▫ Manual Reclining Seats — If Equipped . . . . . 146 ▫ 40-20-40 Front Bench Seat — If Equipped . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Automatic Headlights — If Equipped . . . . . . 161 䡵 Windshield Wipers And Washers . . . . . . . . . . 167 ▫ Headlights On With Wipers (Available With Automatic Headlights Only) . . . . . . . . . . . . 162 ▫ Windshield Wipers . . . . . . . . . . . . . . . . . . . 167 ▫ Headlight Delay . . . . . . . . . . . . . . . . . . . . . 162 ▫ Parking Lights And Panel Lights . . . . . . . . . 162 ▫ Fog Lights — If Equipped . . . . . . . . . . . . . .
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Resume Speed . . . . . . . . . . . . . . . . . . . . 175 ▫ To Vary The Speed Setting . . . . . . . . . . . . . . 175 ▫ To Accelerate For Passing . . . . . . . . . . . . . . 175 䡵 Parksense威 Rear Park Assist — If Equipped . . . 176 ▫ Parksense威 Sensors . . . . . . . . . . . . . . . . . . . 177 䡵 Parkview威 Rear Back Up Camera — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 ▫ Using HomeLink威 . . . . . . . . . . . . . . . . . . . 196 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . 201 ▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . 201 ▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . 197 ▫ Ignition Off Operation . . . . . . . . . . . . . . . . . 201 ▫ General Information . . . . . . . . . . . . . . . . . .
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 䡵 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 䡵 Rear Window Features . . . . . . . . . . . . . . . . . . 220 ▫ Glove Box Storage . . . . . . . . . . . . . . . . . . . 212 ▫ Rear Window Defroster . . . . . . . . . . . . . . . . 220 ▫ Door Storage . . . . . . . . . . . . . . . . . . . . . . . 214 ▫ Power Sliding Rear Window — If Equipped . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 䡵 Slide-In Campers . . . . . . . . . . . . . . . . . . . . . . 238 ▫ Removing The Tailgate . . . . . . . . . . . . . . . . 239 ▫ Camper Applications . . . . . . . . . . . . . . . . . . 238 ▫ Locking Tailgate . . . . . . . . . . . . . . . . . . . . . 240 䡵 Easy-Off Tailgate . . . . . . . . . . . . . . . . . . . . . . 238 ▫ Disconnecting The Rear Camera — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield). Headlight glare can be reduced by moving the small control lever under the mirror to the night position (lever flipped toward the rear of vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 to the left of the button will illuminate to indicate when the dimming feature is activated. The sensor to the right of the button does not illuminate. NOTE: This feature is disabled when the vehicle is moving in reverse. CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean.
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in a passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror. Some vehicles will not have a convex right side mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Power Mirrors — If Equipped The controls for the power mirrors are located on the driver’s door trim panel. 3 Power Mirror Controls 1 — Mirror Select Buttons 2 — Four-Way Mirror Control Switch Power Mirror Controls To adjust a mirror, press either the L (left) or R (right) The power mirror controls consist of mirror select but- button to select the mirror that you want to adjust. tons and a four-way mirror control switch.
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the mirror control switch, press on any of the four Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This arrows for the direction that you want the mirror to feature is activated whenever you turn on the rear move. window defroster. Refer to “Rear Window Features” in “Understanding The Features Of Your Vehicle” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 To use the “Slide-On-Rod” feature, rotate the sun visor downward and unclip it. Pull the sun visor along the “Slide-On-Rod” until the sun visor is in the desired position. 3 Illuminated Vanity Mirror “Slide-On-Rod” Features Of Sun Visor — If Equipped The sun visor “Slide-On-Rod” feature allows for additional flexibility in positioning the visor to block out the sun.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Trailer Towing Mirrors — If Equipped These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads. To change position inboard or outboard, the mirror head should be rotated (flipped in or out). NOTE: Fold the trailer towing mirrors rearward prior to entering an automated car wash. A small blindspot mirror is located next to main mirror and can be adjusted separately.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone allows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “Work” or “Dial” ѧ “248-555-1212”). Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system. Only one linked (or paired) mobile phone can be Voice Command Button used with the system at a time. The system is available in Actual button location may vary with the raEnglish, Spanish, or French languages. dio. The individual buttons are described in the “Operation” section. WARNING! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kept on the roadway ahead.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts. You will be prompted for a specific command and then guided through the available options. example, you can use the compound form voice command “Phonebook New Entry”, or you can break the compound form command into two voice commands: “Phonebook” and “New Entry”.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cancel Command • When prompted, after the beep, say “Pair a Device” At any prompt, after the beep, you can say “Cancel” and and follow the audible prompts. you will be returned to the main menu. However, in a • You will be asked to say a four-digit Personal Identifew instances the system will take you back to the fication Number (PIN), which you will later need to previous menu. enter into your mobile phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the Uconnect™ Phone will use the priority three mobile phone when you make a call. You can select to use a lower priority mobile phone at any time (refer to “Advanced Phone Connectivity” in this section). Call By Saying A Name • Press the button to begin.
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After you are finished adding an entry into the phonebook, you will be given the opportunity to add more NOTE: Adding names to the Uconnect™ Phonebook is phone numbers to the current entry or to return to the recommended when the vehicle is not in motion. main menu. • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 phonebook. Specific Bluetooth威 Phones with Phone Book Access Profile may support this feature. See Uconnect™ website for supported phones. downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use. • To call a name from the Uconnect™ Phonebook or • Only the phonebook of the currently connected mobile downloaded Phonebook, follow the procedure in phone is accessible. “Call by Saying a Name” section.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Automatic downloaded phonebook entries cannot be “Phonebook Edit Entry” can be used to add another phone number to a name entry that already exists in the deleted or edited. phonebook. For example, the entry John Doe may have a • Press the button to begin. mobile and a home number, but you can add “John • After the “Ready” prompt and the following beep, say Doe’s” work number later using the “Phonebook Edit Entry” feature. “Phonebook Edit Entry”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 from which you choose. To select one of the entries • The Uconnect™ Phone will ask you to verify that you button while the from the list, press the wish to delete all the entries from the phonebook. Uconnect™ Phone is playing the desired entry and say • After confirmation, the phonebook entries will be “Delete”. deleted.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To call one of the names in the list, press the Answer Or Reject An Incoming Call — No Call button during the playing of the desired name, and Currently In Progress When you receive a call on your mobile phone, the say “Call”. Uconnect™ Phone will interrupt the vehicle audio sysNOTE: The user can also exercise “Edit” or “Delete” tem, if on, and will ask if you would like to answer the operations at this point. button to accept the call. To reject the call.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 NOTE: The Uconnect™ Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it. Making A Second Call While Current Call Is In Progress To make a second call while you are currently on a call, button and say “Dial” or “Call” followed press the by the phone number or phonebook entry you wish to call.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Termination To end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is cell phone-dependent. To bring the call back from hold, press button until you hear a single beep. and hold the Redial • Press the button to begin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Uconnect™ Phone Features Emergency Assistance If you are in an emergency and the mobile phone is reachable: Language Selection To change the language that the Uconnect™ Phone is using: • Pick up the phone and manually dial the emergency number for your area. • Press the button to begin.
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Canada and 060 for Mexico). The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. • Press the button to begin. • If supported, this number may be programmable on • After the “Ready” prompt and the following beep, say button and say some systems. To do this, press the “Towing Assistance”. “Setup”, followed by “Emergency”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 When calling a number with your Uconnect™ Phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “Send”. For example, if required to enter your PIN followed with a pound, (3 7 4 6 #), you can Voice Mail Calling button and say, “3 7 4 6 # Send”.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Uconnect™ Phone will then send the corresponding Turning Confirmation Prompts ON/OFF phone number associated with the phonebook entry, as Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ tones over the phone. Phone will not repeat a phone number before you dial it). NOTE: • You may not hear all of the tones due to mobile phone • Press the button to begin. network configurations. This is normal.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Dialing Using The Mobile Phone Keypad You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth威 mobile phone, the audio will be played through your vehicle’s audio system. The Uconnect™ Phone will work the same as if you dial the number using Voice Command.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from your Uconnect™ Phone paired mobile phone to the • When prompted, say “List Phones”. button Uconnect™ Phone or vice versa, press the • The Uconnect™ Phone will play the phone names of and say “Transfer Call”. all paired mobile phones in order from the highest to Connect Or Disconnect Link Between The the lowest priority.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Things You Should Know About Your Uconnect™ Phone Uconnect™ Phone Tutorial To hear a brief tutorial of the system features, press the button and say “Uconnect™ Tutorial.
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can either press the Uconnect™ Phone button to Voice Command restore the factory setting or repeat the words and • For best performance, adjust the rearview mirror to phrases when prompted by the Uconnect™ Phone. For provide at least 1⁄2 in (1 cm) gap between the overhead best results, the Voice Training session should be comconsole (if equipped) and the mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 • fully closed windows, • dry weather condition. • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • You can say “O” (letter “O”) for “0” (zero). • Even though the system is designed for users speaking in North American English, French, and Spanish ac- • Even though international dialing for most number combinations is supported, some shortcut dialing cents, the system may not always work for some.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, • dry weather conditions, and • operation from the driver’s seat. SMS Uconnect™ Phone can read or send new messages on your phone. Read Messages: • Performance, such as audio clarity, echo, and loudness If you receive a new text message while your phone is to a large degree rely on the phone and network, and connected to Uconnect™ Phone, an announcement will not the Uconnect™ Phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 3. Where are you? Send Messages: You can send messages using Uconnect™ Phone. To send 4. I need more direction. a new message: 5. L O L • Press the button. 6. Why • After the “Ready” prompt and the following beep, say 7. I love you “SMS Send” or “Send Message.” • You can either say the message you wish to send or say 8. Call me “List Messages.” There are 20 preset messages. 9. Call me later button while the To send a message, press the 10.
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me Turn SMS Incoming Announcement ON/OFF Turning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 3
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 3
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all Voice Commands Alternate(s) Voice Commands Alternate(s) Primary call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Primary language list names list phones mobile mute mute off new entry no other pair a phone phone pairing phonebook previous record again redial Voice Commands Alternate(s) pairing phone book Voice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistance transfer call Uconnect™ Tutorial try again voice training work yes 3
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 If you ever wish to interrupt the system while it lists The system will best recognize your speech if the winbutton, listen dows are closed, and the heater/air conditioning fan is options, press the Voice Command set to low. for the beep, and say your command. button while the Pressing the Voice Command system is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or change commands.
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking. Please note the volume setting for this mode, you may say the following commands: Voice Command is different than the audio system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 • “Menu Radio” (to switch to the radio menu) • “Main Menu” (to switch to the main menu) Disc To switch to the disc mode, say “Disc”. In this mode, you may say the following commands: Satellite Radio • “Track” (#) (to change the track) To switch to satellite radio mode, say “Sat” or “Satellite Radio”.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE − “Continue” (to continue recording) • “Switch to system setup” − “Delete” (to delete the recording) • “Change to setup” • “Play Memos” (to play previously recorded memos) • “Main menu setup” or — During the playback you may press the Voice • “Switch to setup” button to stop playing memos.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect™ vehicle. Voice “Voice Training” feature may be used. button, say “System 1. Press the Voice Command Setup” and once you are in that menu then say “Voice Training.” This will train your own voice to the system and will improve recognition. 2.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Power Seat — If Equipped Some models may be equipped with an eight-way power driver’s seat. The power seat switches are located on the outboard side of the driver’s seat cushion. There are two power seat switches that are used to control the movement of the seat cushion and the seatback.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when you have reached the desired position. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch.
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 WARNING! (Continued) • Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped Front Heated Seats On some models, the front and rear seats may be equipped There are two heated seat switches that allow the driver with heaters in both the seat cushions and seatbacks. and passenger to operate the seats independently. The controls for each seat are located near the bottom center WARNING! of the instrument panel (below the climate controls).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Vehicle Equipped With Remote Start NOTE: • Once a heat setting is selected, heat will be felt within On models that are equipped with remote start, the driver’s heated seat can be programmed to come on two to five minutes. during a remote start. Refer to “Remote Starting System • The engine must be running for the heated seats to — If Equipped” in “Things to Know Before Starting Your operate. Vehicle” for further information.
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select HIGHlevel heating. Press the switch a second time to select LOW-level heating. Press the switch a third time to shut the heating elements OFF. time, the number of illuminated LEDs changes from two to one, indicating the change. The LOW-level setting will turn OFF automatically after a maximum of 45 minutes. Ventilated Seats — If Equipped On some models, both the driver and passenger seats are ventilated.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Press the switch once to choose HIGH, press it a second time to choose LOW. Pressing the switch a third time will turn the ventilated seat OFF. When HIGH speed is selected both lights on the switch will be illuminated. When LOW speed is selected one light will be illuminated. Manual Seat Adjuster — If Equipped Both front seats are adjustable forward or rearward.
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE While sitting in the seat, pull up on the handle and slide Manual Reclining Seats — If Equipped the seat forward or backward. Release the bar once you The recliner handle is used to adjust the seatback position have reached the desired position. Then, using body and is located on the outside of the seat cushion. pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 To adjust the seatback, lift upward on the handle, lean back on the seatback and when you reach the desired position, release the handle. To return the seatback, lift upward on the handle, lean forward and release the handle at the desired position. WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mega Cab姞 Rear Seat Features Reclining Rear Seats — If Equipped The recliner handle is located on the outside of the seat cushion. To adjust the seatback, lift upward on the handle, lean back on the seatback and when you reach the desired position, release the handle. WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 3 Table Mode Handle 2. Fold the seatback forward. Table Mode 3. Lift the seatback, to return the seat to the upright position. Be sure the seatback is locked in place. Folding Rear Seat — If Equipped Both the outboard rear seats will drop and move forward when the seatback is folded flat.
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly. • Cargo must be securely tied down before driving your vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! An improperly latched seat could cause serious injury or death. Make sure that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. Rear Passenger Fold Flat Seats 3. Lift the seatback, to return the seat to the upright position. Be sure the seat is locked in place.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be properly adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision. Front Head Restraints To raise the head restraint, pull upward on the head restraint.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 NOTE: Rear Head Restraints The two outboard seat are equipped with adjustable head • The rear center head restraint (Crew Cab and Quad restraints. To raise the head restraint, pull upward on the Cab) has only one adjustment position that is used to head restraint. To lower the head restraint, press the aid in the routing of a tether.
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE and radio station preset settings. Your Remote Keyless DRIVER MEMORY SEAT — IF EQUIPPED The memory seat buttons are located on the outboard Entry (RKE) transmitters can also be programmed to side of the drivers seat cushion. recall the same positions when the UNLOCK button is pressed. NOTE: The power lumbar option is not programmable with driver memory seats. Your vehicle was delivered with two RKE transmitters.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 1. Insert the ignition key, and turn the ignition switch to 7. Press and release the S (SET) button located on the the ON/RUN position. driver’s door. 2. Press the driver door MEMORY button number 1 if you are setting the memory for driver 1, or button number 2 if you are setting the memory for driver 2. The system will recall any stored settings. Wait for the system to complete the memory recall before continuing to Step 3. 8.
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 12. Repeat the above steps to set the next memory A recall can be cancelled by pressing any of the position, using the other numbered memory button, or to MEMORY buttons on the drivers seat during a recall (S, 1, or 2). When a recall is cancelled, the driver’s seat, link another RKE transmitter to memory. driver’s mirror and the pedals stop moving.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 5. Within five seconds, press and release the UNLOCK button on the RKE transmitter. To disable another RKE transmitter linked to either memory position, repeat steps 1 through 5 for each RKE transmitter. greater than or equal to 2.67 in (68 mm) forward of the rear seat stop when the key is removed from the ignition switch. The seat will then move forward approximately 2.5 in (60 mm) when the key is placed into the ignition and turned out of the LOCK position.
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Each stored memory setting will have an associated Easy TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. Entry/Exit position. NOTE: The Easy Entry/Exit feature is not enabled 1. Pull the hood release lever located below the steering when the vehicle is delivered from the factory. The Easy wheel at the base of the instrument panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 2. Reach into the opening beneath the center of the hood and push the safety latch lever from right to left to release it, before raising the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the front center of the hood to ensure that both latches engage. 3 WARNING! Be sure the hood is fully latched before driving your vehicle.
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS The headlight switch is located on the left side of the instrument panel, next to the steering wheel. The headlight switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). Your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Headlights To turn on the headlights, rotate the headlight switch clockwise to the headlight position. When the headlight switch is on, the parking lights, taillights, license plate light and instrument panel lights are also turned on. To turn off the headlights, rotate the headlight switch back to the O (Off) position. Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels.
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running before the head- delay can be cancelled by either turning the headlight switch on then off, or by turning the ignition ON. lights will turn on in the Automatic Mode. Headlights On With Wipers (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Interior Lights Courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the bottom of the switch) is rotated to the far right detent position, or if equipped, when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE supplement the brightness of the odometer, trip odom- Cargo Light eter, radio and overhead console by rotating the control The cargo lights are turned on by pressing on the cargo to the right until you hear a click. This feature is termed button. the “Parade” mode and is useful when headlights are required during the day.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Lights-On Reminder If the headlights, parking lights, or cargo lights are left on after the ignition is turned OFF, a chime will sound when the driver’s door is opened. Battery Saver To protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights.
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 High/Low Beam Switch Push the multifunction lever toward the instrument panel to switch the headlights to high beam. Pulling the multifunction back toward the steering wheel will turn the low beams back on, or shut the high beams off. High/Low Beam Switch WINDSHIELD WIPERS AND WASHERS Windshield Wipers The wipers and washers are operated by a switch in the multifunction lever. Turn the end of the handle to select the desired wiper speed.
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation Rotate the end of the lever upward, to the first detent past the intermittent settings for low-speed wiper operation. Rotate the end of the lever upward to the second detent past the intermittent settings for high-speed wiper operation. Intermittent Wiper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 WARNING! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. the first detent and release. The wipers will cycle one time and automatically shut off.
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull the lever toward the steering wheel to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Release the lever to lock the steering column firmly in place. Tilt Steering Lever WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 The heated steering wheel switch is located on the switch bank below the climate controls. Press the switch to turn on the heated steering wheel. The light on the switch will illuminate to indicate the steering wheel heater is on. Pressing the switch a second time will turn off the heated steering wheel and light indicator. NOTE: The engine must be running for the heated steering wheel to operate.
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from the driver to provide improved position with the • The pedals cannot be adjusted when the vehicle is in steering wheel. REVERSE or when the Electronic Speed Control System is on. The following messages will be displayed The adjustable pedal switch is located to the left side of on vehicles equipped with the Electronic Vehicle Inthe steering column.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked. 3 ELECTRONIC SPEED CONTROL When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 decrease until the button is released. Release the button To Resume Speed To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release. Resume can be used at any speed will be established. above 20 mph (32 km/h). Pressing the SET (-) button once will result in a 1 mph (1.6 km/h) decrease in set speed.
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so PARKSENSE姞 REAR PARK ASSIST — IF it may be preferable to drive without Electronic Speed EQUIPPED The ParkSense威 Rear Park Assist system provides visual Control. and audible indications of the distance between the rear WARNING! fascia and a detected obstacle when backing up, e.g. during a parking maneuver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 ParkSense姞 Sensors The four ParkSense威 sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense姞 Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Park Assist System Off Park Assist System On The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 3 Slow Tone Fast Tone
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Rear Distance (in/cm) Audible Alert Chime Display Message Arcs Radio Volume Reduced Greater than 79 in (200 cm) None Park Assist System ON None No WARNING ALERTS 79-39 in 39-25 in (200-100 cm) (100-65 cm) Single 1/2 Slow Second Tone Warning Object Warning Object Detected Detected 3 Solid 3 Slow (Continuous) Flashing Yes Yes NOTE: ParkSense威 will reduce the volume of the radio, if on, when the system is sounding an audio tone.
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE display the “PARK ASSIST SYSTEM OFF” message for approximately five seconds. Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the “PARK ASSIST SYSTEM OFF” message for as long as the vehicle is in REVERSE. Your Instrument Panel” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Cleaning The ParkSense姞 System • When you move the shift lever to the REVERSE Clean the ParkSense威 sensors with water, car wash soap position and ParkSense威 is turned off, the instrument and a soft cloth. Do not use rough or hard cloths. Do not cluster will display “PARK ASSIST SYSTEM OFF” scratch or poke the sensors. Otherwise, you could dammessage for as long as the vehicle is in REVERSE. age the sensors.
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Objects such as bicycle carriers, trailer hitches, etc., must not be placed within 12 in (30 cm) from the rear fascia/bumper while driving the vehicle. Failure to do so can result in the system misinterpreting a close object as a sensor problem, causing the “SERVICE PARK ASSIST SYSTEM” message to be displayed in the instrument cluster.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 WARNING! WARNING! (Continued) • Drivers must be careful when backing up even when using the ParkSense威 Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue to pay attention to your surroundings. Failure to do so can result in serious injury or death.
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW姞 REAR BACK UP CAMERA — IF EQUIPPED Your vehicle may be equipped with the ParkView威 Rear Back Up Camera that allows you to see an on-screen image of the rear surroundings of your vehicle whenever the shift lever is put into REVERSE. The image will be displayed on the Navigation/Multimedia radio display screen along with a caution note to “check entire surroundings” across the top of the screen. After five seconds this note will disappear.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 WARNING! CAUTION! (Continued) Drivers must be careful when backing up even when using the ParkView威 Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death.
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Enable or disable the rear camera feature by selecting • Power Sunroof Switch — If Equipped “enable rear camera in reverse” soft key and pressing the • Power Sliding Rear Window Switch — If Equipped “save” soft-key. • Universal Garage Door Opener — If Equipped 5. Press the “save” soft key. Turning ParkView姞 On Or Off — Without Navigation/Multimedia Radio 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Courtesy/Reading Lights Both lights in the overhead console and rear passenger compartment will illuminate as courtesy lights when a door is opened, when the dimmer control is rotated to the courtesy light position (full right position), or when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink威 replaces up to three hand-held transmitters that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink威 unit is powered by your vehicles 12 Volt battery. The HomeLink威 buttons that are located in the overhead console designate the three different HomeLink威 channels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Before You Begin Programming HomeLink姞 Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink威 system. Erase all channels before you begin programming.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Erasing all channels should only be performed when programming HomeLink威 for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1–800–355–3515 or, on the Internet at www.HomeLink.com for information or assistance. Programming A Rolling Code For programming garage door openers that were manufactured after 1995.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 3. Simultaneously press and hold both the Homelink威 On some garage door openers/devices there may be a button you want to program and the hand-held transmit- light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. ter button. 4. Continue to hold buttons until the EVIC display NOTE: You have 30 seconds in which to initiate the next changes from “CHANNEL # TRAINING” to “CHAN- step after the LEARN button has been pressed.
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to Reprogramming A Single HomeLink威 Button To reprogram a channel that has been previously trained, 8 cm) away from the HomeLink威 button you wish to program. follow these steps: 3. Simultaneously press and hold both the Homelink威 button you want to program and the hand-held transmit2. Press and hold the desired HomeLink威 button until ter button. the EVIC displays “CHANNEL # TRAINING” Do not 4.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 5. Press and hold the programmed HomeLink威 button. The EVIC will display “CHANNEL # TRANSMIT”. If the garage door opener/device activates, programming is complete. Canadian/Gate Operator Programming For programming transmitters in Canada/United States that require the transmitter signals to “time-out” after several seconds of transmission.
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Simultaneously press and hold both the Homelink威 Reprogramming A Single HomeLink威 Button button while you press and release (“cycle”), your hand- To reprogram a channel that has been previously trained, follow these steps: held transmitter every two seconds. 4. Continue to hold buttons until the EVIC display 1. Turn the ignition switch to the ON/RUN position. changes from “CHANNEL # TRAINING” to “CHAN2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Security Troubleshooting Tips It is advised to erase all channels before you sell or turn If you are having trouble programming HomeLink威, here in your vehicle. are some of the most common solutions: To erase the channels press and hold the two outside • Replace the battery in the original hand-held transmitter. HomeLink威 buttons (I and III) for up 20 seconds.
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes most garage door opener models manufactured after 1982.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 POWER SUNROOF — IF EQUIPPED The power sunroof switch is located on the overhead console between the courtesy/reading lights. Power Sunroof Switch WARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. do not leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Open Sunroof — Express Mode Press the switch rearward and release it and the sunroof will open automatically from any position. The sunroof will open fully and stop automatically. This is called “Express Open”. During “Express Open” operation, any movement of the sunroof switch will stop the sunroof. Pinch Protect Feature This feature will detect an obstruction in the opening of the sunroof during Express Close operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Venting Sunroof — Express Press and release the “Vent” button, and the sunroof will open to the vent position. This is called “Express Vent”, and will occur regardless of sunroof position. During Express Vent operation, any movement of the switch will stop the sunroof. the rear windows open, open the front and rear windows together to minimize the buffeting.
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE time is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)” in “Understanding Your Instrument Panel” for further information. ELECTRICAL POWER OUTLETS The auxiliary 12 Volt (13 Amp) power outlets can provide power for in-cab accessories designed for use with the standard “cigar lighter” plug.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 • Inside the top storage tray — with floor mounted • Inside the upper lid of the center storage compartment shifter. — if equipped.
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Rear of the center console storage compartment — The key symbol indicates that this outlet can supply Quad Cab威 or Crew Cab. power when the key is in the ON/RUN or ACC positions. All accessories connected to the outlet(s) should be removed or turned off when the vehicle is not in use to protect the battery against discharge.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will discharge the battery even more quickly.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 For vehicles equipped with an optional floor shifter. Optional Floor Shifter 1 — Cigar Lighter 2 — Ash Receiver POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watts Maximum) outlet is located on the center stack of the instrument panel, to the right of the radio. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts.
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power inverter is designed with built-in overload protection. If the power rating of 150 Watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximately 170 Watts, the power inverter may have to be reset manually. To reset the inverter manually press the power inverter button OFF and ON.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 The power inverter switch is located on the switch bank below the Climate Controls. To turn on the power outlet, press the switch once. Press the switch a second time to turn the power outlet off. NOTE: • When the power inverter switch is pressed, there will be a delay of approximately one second before the power inverter status indicator turns on. The status indicator of the AC power inverter indicates whether the inverter is producing AC power.
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Instrument Panel Cupholders — (40–20–40 Seats) The cupholders are located in the pull-out tray at the bottom of the center stack. The pull-out tray must be secured when opened. To secure the tray push down until it “clicks”.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Front Instrument Panel Cupholders — Floor Mounted Shifter For vehicles equipped with bucket seats and a floor mounted shifter there are two cupholders located in the floor console. Rear Cupholder — Quad Cab姞 Quad Cab威 vehicles may be equipped with a rear cupholder that consists of two cup wells for rear passenger convenience.
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholder — Crew Cab STORAGE Crew Cab vehicles are equipped with rear cupholders Glove Box Storage The glove box is located on the passenger side of the located in the center armrest. instrument panel and features both an upper and lower storage area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To open the upper glove box push upward on the handle To open the lower glove box, pull on the handle to release release. The glove box door will automatically open. the latch and lower the door.
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Storage Front Door Storage — If Equipped Storage areas and bottle holders (drivers side only) are located in the door trim panels. Rear Door Storage — Crew Cab Storage compartments are located in both the driver and passenger door trim panels.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Center Storage Compartment — If Equipped The center storage compartment is located between the driver and passenger seats. The storage compartment provides an armrest and contains both and upper and lower storage area. Center Storage Compartment WARNING! • This armrest is not a seat. Anyone seated on the armrest could be seriously injured during vehicle operation, or a collision. Only use the center seating position when the armrest is fully upright.
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull on the upper handle on the front of the armrest to With the upper lid closed, pull on the lower handle to raise the cover. The upper storage area contains a 12 Volt open the lower storage bin. power outlet that can be used to power small electrical devices, refer to “Electrical Power Outlets” for further information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 WARNING! Do not operate this vehicle with a console compartment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury. Second Row In-Floor Storage Bin — If Equipped In-floor storage bins are located in front of the second row seats and can be used for extra storage.
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The front seat may have to be moved forward to Seatback Storage Located in the back of both the driver and passenger fully open the lid. front seats are pockets that can be used for storage. Opened Storage Bin Drivers Side Seatback Storage Storage (Regular Cab) The storage bin is located behind the front seats and runs the length of the cab.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 3 Storage Bin Storage and Seats (Crew Cab) The Crew Cab models provide additional storage under the rear seats. Lift the seats to access the storage compartment. To open the storage compartments, lift upward on the handle of the latch and open the lid. Crew Cab Storage CAUTION! Always lift the storage compartment lids by using the handle. Failure to lift the lids by using the handle can result in damage to the lids.
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Plastic Grocery Bag Retainers REAR WINDOW FEATURES (Regular Cab Models) Rear Window Defroster Retainer hooks which will hold plastic grocery bag The rear window defroster button is located on the handles are built into the back panel of the cab, behind climate control panel. Press this button to turn on the rear seat. the rear window defroster and the heated outside mirrors (if equipped).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding the Load Floor FOLD FLAT LOAD FLOOR — IF EQUIPPED Quad Cab威 and Crew Cab models with a 60/40 rear seat 1. Lift the 60/40 seat cushion(s) to the upward position. may be equipped with a folding load floor. WARNING! Do not operate the vehicle with loose items stored on the load floor. While driving or in an accident you may experience abrupt stopping, rapid acceleration, or sharp turns.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 2. Grasp the knob on the load floor and lift the knob until Positioning the Load Floor for Storage Access Under the load floor unfolds into position. the Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of the load floor. 3. Lift the load floor up to access storage under the load floor. Load Floor In Open Position 3. Reverse the procedure to store the load floor.
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not drive with the load floor in the up position. When stopping fast or in an accident, the load floor could move to the down position causing serious injury. 4. Reverse the procedure to put the load floor back in the secured down position before you operate the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 RamBox姞 Integrated Box Side Storage Bins Cargo storage bins are located on both sides of the pickup box. The cargo storage bins provide watertight, lockable, illuminated storage for up to 150 lbs (68 kg) of evenly distributed cargo. RamBox威 Cargo Storage Bins CAUTION! Failure to follow the following items could cause damage to the vehicle: • Assure that all cargo inside the storage bins is properly secured.
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open a storage bin, press and release the button The interior of the RamBox威 will automatically illumilocated on the lid. The RamBox威 lid will open upward to nate when the lid is opened. In addition to the automatic allow hand access. Lift the lid to fully open. illumination switch, there is a manual on/off switch located at the rear of each storage bin.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 CAUTION! CAUTION! (Continued) Leaving the lid open for extended periods of time could cause the vehicle battery to discharge. If the lid is required to stay open for extended periods of time, it is recommended that the bin lights be turned off manually using the on/off switch. The RamBox威 storage bins can be locked using the vehicle key. To lock the storage bin, insert the key into the keyhole on the pushbutton and turn clockwise to lock.
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE RamBox姞 Safety Warning RamBox威 Storage Bin Cover Emergency Release Carefully follow these warnings to help prevent personal Lever — If Equipped As a security measure, a Storage Bin Cover Emergency injury or damage to your vehicle: Release is built into the storage bin cover latching mechaWARNING! nism. • Always close the storage bin covers when your vehicle is unattended. • Do not allow children to have access to the storage bins.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever attached to the storage bin cover latching mechanism. Bed Extender — If Equipped The bed extender has three functional positions: To install the bed extender into the storage position, perform the following: 1.
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. With the side gates open, position the extender fully forward in the bed against the front panel. Cargo Tie Down Loop Storage Position 3. Rotate the side gates closed allowing the outboard ends to be positioned in front of the cargo tie down loops. 4. Rotate the center handle horizontally to secure the side gates in the closed position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 5. Lock the center handle using the vehicle key to secure the panel into place and assist against theft. Divider Position The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed. There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo.
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into a divider position per- 2. With the side gates open, position the extender so the form the following: outboard ends align with the intended slots in the sides 1. Make sure the center handle is unlocked using the of the bed. vehicle key and rotate the center handle vertically to release the extender side gates. Aligning Gate To Slots Center Handle And Lock 1 — Center Handle Lock 2 — Handle 3.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 4. Rotate the center handle horizontally to secure the side Extender Position The extender position allows you to load the bed of the gates in the closed position. truck beyond the tail gate. The bed extender will add an additional 15 in (38 cm) in the back of the truck when additional cargo room is needed. The extender position utilizes a locating pin and rotating handle located on both sides of the truck bed near the tailgate. Side Gates Closed 5.
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into the extender position perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the extender side gates. 3. Fit the end of the side gate ends onto the pin and handle. Extender Installation 4. Rotate the handles to the horizontal position to secure into place.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 WARNING! Locking Tab To reduce the risk of potential injury or property damage: • Cargo must be secured. • Do not exceed cargo load rating of your vehicle. • Secure all loads to truck utilizing cargo tie downs. • Extender should not be used as cargo tie down. • When vehicle is in motion do not exceed 150 lbs (68 kg) load on the tailgate. • The bed extender is not intended for off road use.
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs (113 kg) and the angle of the load on each cleat should not exceed 45 degrees above horizontal, or damage to the cleat or cleat rail may occur. There are two adjustable cleats on each side of the bed that can be used to assist in securing cargo.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 out on the cleat and slide it to the detent nearest the To remove the cleats from the utility rail, remove the end desired location. Make sure the cleat is seated in the cap by pushing up on the locking tab, located on the detent and tighten the nut. bottom of the end cap. Slide the cleat off the end of the rail.
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SLIDE-IN CAMPERS Disconnecting the Rear Camera — If Equipped 1. Open the tailgate to access the rear camera connector Camper Applications Certain truck models are not recommended for slide-in bracket located on the rear sill. campers. To determine if your vehicle is excluded, please refer to the “Consumer Information Truck-Camper Loading” document available from your authorized dealer. For safety reasons, follow all instructions in this important document.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 5. Connect the tailgate plug (provided in the glove box) to the tailgate wiring harness to ensure that the terminals do not corrode. 6. Tape the tailgate harness and bracket against the forward-facing surface of the tailgate. This will prevent damaging the connector and bracket when storing or reinstalling the tailgate. Removing The Tailgate Locking Tab 1.
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Make sure tailgate is supported when removing 5. Slide the entire tailgate to the right to free the left side support cables. pivot. 6. Remove the tailgate from the vehicle. NOTE: Do not carry the tailgate loose in the truck pickup box. WARNING! To avoid inhaling carbon monoxide, which is deadly, the exhaust system on vehicles equipped with “Cap or Slide-In Campers” should extend beyond the overhanging camper compartment and be free of leaks.
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . 245 䡵 Switch Bank Button Description . . . . . . . . . . . 246 ▫ Upper Switch Bank . . . . . . . . . . . . . . . . . . . 246 ▫ Lower Switch Bank . . . . . . . . . . . . . . . . . . . 247 䡵 Instrument Cluster — Base . . . . . . . . . . . . . . . 248 䡵 Instrument Cluster — Premium . . . . . . . . . . . 249 䡵 Instrument Cluster Descriptions . . . . . . . . . . .
242 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Compass / Temperature Display . . . . . . . . . 280 ▫ Operation Instructions - Auxiliary Mode . . . . 297 ▫ Customer-Programmable Features (System Setup) . . . . . . . . . . . . . . . . . . . . . . 282 䡵 Media Center 130 With Satellite Radio (Sales Code RES+RSC). . . . . . . . . . . . . . . . . . . 298 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NAV — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 243 䡵 iPod威/USB/MP3 Control — If Equipped . . . . . 314 ▫ Connecting The iPod威 Or External USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 ▫ Using This Feature . . . . . . . . . . . . . . . . . . . 316 ▫ Controlling The iPod威 Or External USB Device Using Radio Buttons . . . . . . . . . . . . . 316 ▫ Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . 316 ▫ List Or Browse Mode . . . . . . . . . . . . . . . . .
244 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Unwired威 Stereo Headphone Lifetime Limited Warranty . . . . . . . . . . . . . . . . . . . . 338 䡵 Climate Controls . . . . . . . . . . . . . . . . . . . . . . 356 ▫ System Information . . . . . . . . . . . . . . . . . . . 339 ▫ Manual Heating And Air Conditioning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 䡵 Steering Wheel Audio Controls — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . .
UNDERSTANDING YOUR INSTRUMENT PANEL 245 INSTRUMENT PANEL FEATURES 4 1 2 3 4 5 6 — — — — — — Headlight Switch Instrument Cluster Radio Upper Switch Bank Upper Glove Compartment Lower Glove Compartment 7 — 115v Power Inverter Outlet 8 — Power Outlet 9 — Lower Switch Bank 10 — Cup Holders 11 — Climate Controls 12 — Power Outlet/Cigar Lighter 13 14 15 16 — — — — Transfer Case Position Switch Ignition Switch Hood Release Parking Brake Release
246 UNDERSTANDING YOUR INSTRUMENT PANEL SWITCH BANK BUTTON DESCRIPTION Upper Switch Bank 2. ESC OFF Refer to “Starting And Operating” for more information. 3. HAZARD WARNING FLASHER The upper switch bank is located on the center of the Refer to “What To Do In Emergencies” for more inforinstrument panel. mation. 4. 115V POWER INVERTER Refer to “Understanding The Features Of Your Vehicle” for more information. 5. REAR PARK ASSIST Refer to “Understanding The Features Of Your Vehicle” for more information.
UNDERSTANDING YOUR INSTRUMENT PANEL 247 1. HEATED SEATS Refer to “Understanding The Features Of Your Vehicle” The lower switch bank is located on the center of the for more information. instrument panel. 2. VENTILATED SEATS Refer to “Understanding The Features Of Your Vehicle” for more information. Lower Switch Bank 3. HEATED STEERING WHEEL Refer to “Understanding The Features Of Your Vehicle” for more information.
248 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — BASE
UNDERSTANDING YOUR INSTRUMENT PANEL 249 INSTRUMENT CLUSTER — PREMIUM 4
250 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS • Check for an inoperative outside light bulb if either indicator remains on and does not flash, or flashes at a rapid rate. 1. Tachometer The tachometer indicates engine speed in Revolutions Per Minute (RPM x 1000). 3. Fuel Gauge Shows level of fuel in tank when ignition switch is in the CAUTION! ON/RUN position. Do not operate the engine with the tachometer pointer at high RPM for extended periods. Engine damage may occur. 4.
UNDERSTANDING YOUR INSTRUMENT PANEL 251 CAUTION! WARNING! Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H” and you hear continuous chimes, turn the engine off immediately and call an authorized dealership for service. A hot engine cooling system is dangerous.
252 UNDERSTANDING YOUR INSTRUMENT PANEL rotate at the same speed. Low range provides a greater If the light remains lit with the engine running, your gear reduction ratio to provide increased torque at the vehicle will usually be drivable; however, see an authorized dealer for service as soon as possible. If the light is wheels.
UNDERSTANDING YOUR INSTRUMENT PANEL 253 9. 4WD Auto Indicator 11. TOW/HAUL The 4WD auto indicator will be illuminated The TOW HAUL button is located on the whenever the four-wheel drive mode is autocenter stack upper switch bank. This light will matically engaged. illuminate when TOW HAUL mode is selected. 10. SVC (Service) 4WD 12. Electronic Stability Control (ESC) Activation/ The SVC 4WD light monitors the electric shift Malfunction Indicator Light — If Equipped four-wheel drive system.
254 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • The “ESC Off Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on momentarily each time the ignition switch is turned to ON/RUN. 14. Oil Pressure Gauge The pointer should always indicate some oil pressure when the engine is running. A continuous high or low reading under normal driving conditions may indicate a lubrication system malfunction. Immediate service should be obtained from an authorized dealer.
UNDERSTANDING YOUR INSTRUMENT PANEL 255 16. Odometer Display / Electronic Vehicle Information Center (EVIC) Display Area — If Equipped Odometer Display The odometer display shows the total distance the vehicle has been driven. U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
256 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: There is also an engine hour function. This indicates the total number of hours the engine has been running. To display the engine hours on the base cluster, perform the following: Place the ignition in the ON/ RUN, but do not start the engine. With the odometer value displayed, hold the TRIP button down for a period of six seconds. The odometer will change to trip value first, then it will display the engine hour value.
UNDERSTANDING YOUR INSTRUMENT PANEL 257 A loose, improperly installed, or damaged fuel filler cap change indicator system is duty cycle-based, which may also turn on the Malfunction Indicator Light (MIL). means the engine oil change interval may fluctuate dependent upon your personal driving style. LoW tirE When the appropriate condition exists, the odometer Unless reset, this message will continue to display each display will toggle between Lo and tirE for three cycles.
258 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the indicator message illuminates when you service. Refer to “If Your Engine Overheats” in “What To start the vehicle, the oil change indicator system did not Do In Emergencies” for further information. reset. If necessary, repeat this procedure. For vehicles equipped with a premium cluster this indicator will display in the Electronic Vehicle Information 17. Engine Temperature Warning Light This light warns of an overheated engine condi- Center (EVIC).
UNDERSTANDING YOUR INSTRUMENT PANEL 259 moves to either extreme left or right and remains there 19. Low Fuel Light When the fuel level reaches approximately 3.0 gal during normal driving, the electrical system should be (11.0 L) this light will turn on, and remain on until serviced. fuel is added. NOTE: The voltmeter may show a gauge fluctuation at For vehicles equipped with a premium cluster this indi- various engine temperatures.
260 UNDERSTANDING YOUR INSTRUMENT PANEL 23. Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-lock Brake System reservoir.
UNDERSTANDING YOUR INSTRUMENT PANEL 261 WARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 24.
262 UNDERSTANDING YOUR INSTRUMENT PANEL For vehicles equipped with a premium cluster this indicator will display in the Electronic Vehicle Information Center (EVIC). Refer to ”Electronic Vehicle Information Center (EVIC) — If Equipped” for further information. As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
264 UNDERSTANDING YOUR INSTRUMENT PANEL Although your vehicle will usually be drivable and not 26. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of need towing, see your authorized dealer for service as an onboard diagnostic (OBDII) system which soon as possible. monitors the emissions and engine control sysCAUTION! tem.
UNDERSTANDING YOUR INSTRUMENT PANEL 265 WARNING! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to the driver, occupants or others. 27.
266 UNDERSTANDING YOUR INSTRUMENT PANEL 30. Transmission Temperature Warning Light WARNING! This light indicates that there is excessive transmission fluid temperature that might occur If the Transmission Temperature Warning Light is with severe usage such as trailer towing.
UNDERSTANDING YOUR INSTRUMENT PANEL 267 31. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver’s seat belt remains unbuckled, the seat belt reminder light will flash or remain on continuously.
268 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: ELECTRONIC VEHICLE INFORMATION CENTER • The compass on your vehicle is self-calibrating, elimi(EVIC) — IF EQUIPPED The Electronic Vehicle Information Center (EVIC) feanating the need to manually calibrate the compass. tures a driver-interactive display that is located in the • The EVIC main menu will display Radio Off, AM/FM instrument cluster. and SAT radio stations, and AUX/HDD sources at the top of the main menu above Fuel Economy.
UNDERSTANDING YOUR INSTRUMENT PANEL 269 • Customer Programmable Features (System Setup) • Trip Information (in Odometer line) Press and release the DOWN button to scroll downward through the main menus and submenus. SELECT Button Press and release the SELECT button for access to main menus or sub-menus. Press and hold the SELECT button for two seconds to reset features. BACK Button Press the BACK button to scroll back to a previous menu or sub-menu.
270 UNDERSTANDING YOUR INSTRUMENT PANEL • Right front turn signal lamp out • Wrong Key • Left rear turn signal lamp out • Damaged Key • Right rear turn signal lamp out • Key not programmed • Service air filter • Key In Ignition • Perform service • Turn Signal On • ESC System Off • Park Assist System On • Coolant Low • Park Assist System Off • Check Trailer Brake Wiring • Oil Change Due > Dealer Info • Service Trailer Brake System • Warning Object Detected • Trailer Brake Connected • Serv
UNDERSTANDING YOUR INSTRUMENT PANEL 271 • Remote start aborted — Fuel low • Blind spot detection unavailable • Remote start active — Key to Run • Automatic High Beams on • Remote start disabled — System fault • Automatic High Beams off • System Setup Unavailable — Vehicle in Motion • (manual transmission) • • Remote Start Disable — Start Vehicle to Reset • • Service Four Wheel Drive System • • Clean Park Assist sensors • • Front Park Assist Not available - Blinded • • Rear Park Assist Not available -
272 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory 1 Profile Recall • Memory 2 Profile Recall • Adjustable Pedals Unavail — Veh in Reverse Do not operate the vehicle until the cause is corrected. This light does not show how much oil is in the engine. The engine oil level must be checked under the hood. • Charging System Light This light shows the status of the electrical charging system.
UNDERSTANDING YOUR INSTRUMENT PANEL 273 If the light remains lit with the engine running, your • Electronic Speed Control Light This light will turn on when the electronic vehicle will usually be drivable. However, see an authorized dealer for service as soon as possible. If the light is speed control is ON. flashing when the engine is running, immediate service is required.
274 UNDERSTANDING YOUR INSTRUMENT PANEL shift the transmission into NEUTRAL and idle the ve- light comes on, stop the vehicle and run the engine at idle hicle. If the temperature reading does not return to or faster, with the transmission in NEUTRAL until the normal, turn the engine off immediately and call for light goes off. service. Refer to “If Your Engine Overheats” in “What To CAUTION! Do In Emergencies” for more information. • SERV 4WD The SERV 4WD light monitors the electric shift 4WD system.
UNDERSTANDING YOUR INSTRUMENT PANEL 275 • Loose Gascap Indicator If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the telltale display area. Tighten the fuel filler cap properly and press the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started.
276 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy / Fuel Saver Mode / Distance To Empty (DTE) — If Equipped Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “0” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset. Fuel Saver Mode ECO will display in the Compass / Outside Temperature line of the EVIC.
UNDERSTANDING YOUR INSTRUMENT PANEL 277 Distance To Empty (DTE) Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the RETURN button.
278 UNDERSTANDING YOUR INSTRUMENT PANEL • Trip B Shows the total distance traveled for Trip B since the last reset. Vehicle Info (Customer Information Features) Press and release the UP or DOWN button until “Vehicle Info” displays in the EVIC and press the SELECT button. Press the UP and DOWN button to scroll through the • Elapsed Time available information displays, then press SELECT to Shows the total elapsed time of travel since the last reset display any one of the following choices.
UNDERSTANDING YOUR INSTRUMENT PANEL 279 NOTE: Tire PSI Press and release the UP or DOWN button until “Tire • Tires heat up during normal driving conditions. Heat PSI” displays in the EVIC and press the SELECT button. will cause the tire pressure to increase from 2 to 6 psi This will display the Tire Pressure Monitor System (14 to 41 kPa) during normal driving conditions. Refer (shows the current pressure of all four road tires).
280 UNDERSTANDING YOUR INSTRUMENT PANEL Compass / Temperature Display The compass readings indicate the direction the vehicle is facing. The EVIC will display one of eight compass readings and the outside temperature. NOTE: • The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 281 NOTE: A good calibration requires a level surface and 4. Press and release the SELECT button to start the an environment free from large metallic objects such as calibration. The “CAL” indicator will be displayed in the buildings, bridges, underground cables, railroad tracks, EVIC. etc. 5.
282 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings. 2. Press the UP or DOWN button until the System Setup (Customer-Programmable Features) menu is reached, then press the SELECT button. 3.
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Press and release the UP or DOWN button until System route, mile by mile, turn-by-turn until the final destinaSetup displays in the EVIC. Press the SELECT button to tion is reached. To make your selection, press and release the SELECT button until a check-mark appears next to enter the System Setup Sub-Menu.
284 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Unlock Doors When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated, or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 285 seat features will automatically turn on when temperatures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C) the driver vented seat will turn on when remote start is activated. These features will stay on through the duration of remote start or until the key is turned to RUN.
286 UNDERSTANDING YOUR INSTRUMENT PANEL Headlamp Off Delay When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, scroll up or down until the preferred setting is highlighted, then press and release the SELECT button until a checkmark appears next to the setting, showing that the setting has been selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 287 been deactivated. When this feature is deactivated, the Key-Off Power Delay system reverts to the standard intermittent wiper When this feature is selected, the power window switches, radio, hands-free system (if equipped), DVD operation.
288 UNDERSTANDING YOUR INSTRUMENT PANEL Hill Start Assist (HSA) When on is selected, the HSA system is active. Refer to “Electronic Brake Control System” in “Starting And Operating” for system function and operating information. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 289 MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ RHB) CD/DVD/HDD/NAV — IF EQUIPPED MEDIA CENTER 130 (SALES CODE RES) NOTE: The radio sales code is located on the lower right NOTE: The sales code is located on the lower right side side of the radio faceplate. of the unit’s faceplate. Refer to your Uconnect™ Multimedia RHR, RER, RBZ or RHB user’s manual for detailed operating instructions.
290 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Press the right switch position to operate the radio. to seek up and the left switch to seek down. The radio Power Switch/Volume Control (Rotary) will remain tuned to the new station until you make Push the ON/VOLUME control knob to turn on the another selection. Holding either button will bypass radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 291 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the knob to save time change. mid-range tones. 5. To exit, press any button/knob, or wait five seconds. Push the rotary TUNE/SCROLL control knob a third RW/FF time and TREBLE will display.
292 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by repeating the above procedure with this exception: Press exit setting tone, balance, and fade. the SET/RND button twice and SET 2 will show in the AM/FM Button display window. Each button can be set for SET 1 and Press the buttons to select either AM or FM mode. SET 2 in both AM and FM.
UNDERSTANDING YOUR INSTRUMENT PANEL 293 If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and • The ignition switch must be in the ON or ACC seconds. Play will begin at the start of track 1. position to operate the radio.
294 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within playing time display to a small CD playing time display. 10 seconds, it will be reloaded.
UNDERSTANDING YOUR INSTRUMENT PANEL 295 SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
296 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the • Level 1: 12 (including a separator ⬙.⬙ and a threefollowing table are supported. In addition, variable bit character extension) rates (VBR) are also supported. The majority of MP3 files • Level 2: 31 (including a separator ⬙.⬙ and a three- use a 44.
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a supported. single-session disc, enable the “Disc at Once” option Playback of MP3 Files before writing to the disc. When a medium containing MP3 data is loaded, the radio checks all files on the medium.
298 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Media Center 130 (RES/RSC) Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 299 Power Switch/Volume Control (Rotary) Voice Command System (Radio) — If Equipped Push the ON/VOLUME control knob to turn on the Refer to “Voice Command” in the Uconnect™ User radio. Push the ON/VOLUME control knob a second Manual located on the DVD for further details. time to turn off the radio.
300 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a “Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone” message will display on the radio knob to save time change. screen. 5. To exit, press any button/knob or wait five seconds. TIME Button The clock can also be set by pressing the SETUP button.
UNDERSTANDING YOUR INSTRUMENT PANEL 301 RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display. Turn the TUNE/SCROLL control knob to the right or left to increase or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display.
302 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be selected. Many radio stations do not currently broadcast Music Type information.
UNDERSTANDING YOUR INSTRUMENT PANEL 303 By pressing the SEEK button when the Music Type icon is AM/FM Button displayed, the radio will be tuned to the next frequency Press the button to select either AM or FM mode. station with the same selected Music Type name. The SET/RND Button — To Set the Pushbutton Music Type function only operates when in the FM mode.
304 UNDERSTANDING YOUR INSTRUMENT PANEL and 12 FM stations to be stored into pushbutton memory. • This radio is capable of playing compact discs (CD), The stations stored in SET 2 memory can be selected by recordable compact discs (CD-R), rewritable compact pressing the pushbutton twice. discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Every time a preset button is used, a corresponding Inserting Compact Disc(s) button number will display.
UNDERSTANDING YOUR INSTRUMENT PANEL 305 CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • The RES Media Center is a single CD player. Do not attempt to insert a second CD if one is already loaded. EJECT Button - Ejecting a CD Press the EJECT button to eject the CD.
306 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner. Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restrictions. AM/FM Button Press the button to select either AM or FM mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 307 Discs created with an option such as ⬙keep disc open after writing⬙ are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited. For large numbers longer disc loading times. of files and/or folders, the radio may be unable to display the file name and folder name and will assign Supported MP3 File Formats a number instead.
308 UNDERSTANDING YOUR INSTRUMENT PANEL MPEG Specification MPEG-1 Audio Layer 3 MPEG-2 Audio Layer 3 Sampling Frequency (kHz) 48, 44.1, 32 24, 22.05, 16 Bit Rate (kbps) 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
UNDERSTANDING YOUR INSTRUMENT PANEL 309 LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
310 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF). radio system in your vehicle. Sirius will supply a welcome kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www.sirius.com, or at www.siriuscanada.
UNDERSTANDING YOUR INSTRUMENT PANEL 311 using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL control knob and the Sirius ID number will display. The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle.
312 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before continuing to the next.
UNDERSTANDING YOUR INSTRUMENT PANEL 313 If a preset button is activated while in the Music Type selected within five seconds after pressing the SET but(Program Type) mode, the Music Type mode will be ton, the channel will continue to play but will not be stored into pushbutton memory. exited and the radio will tune to the preset channel.
314 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions (Uconnect™ Phone) — If Equipped Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details. iPod威 control supports Mini, 4G, Photo, Nano, 5G iPod威 and iPhone威 devices. Some iPod威 software versions may not fully support the iPod威 control features. Please visit Apple’s website for software updates.
UNDERSTANDING YOUR INSTRUMENT PANEL 315 when closing the lid. This allows routing of the cable without damaging it while closing the lid. If a cut out is not available in the glove compartment, route the cable away from the lid latch and in a place that will allow the lid to close without damaging the cable.
316 UNDERSTANDING YOUR INSTRUMENT PANEL control mode, audio tracks (if available from audio Using This Feature By using iPod cable or external USB device to connect to device) start playing over the vehicle’s audio system. USB port: Play Mode • The audio device can be played on the vehicle’s sound When switched to iPod威/USB/MP3 control mode, the system, providing metadata (artist, track title, album, iPod威 or external USB device automatically starts Play etc.) information on the radio display. mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 317 • Jump backward in the current track by pressing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track. • Jump forward in the current track by pressing and holding the FF >> button. to the next screen of data for that track. Once all screens have been viewed, the last INFO button press will go back to the play mode screen on the radio.
318 UNDERSTANDING YOUR INSTRUMENT PANEL device, or press the VR button and say ⬙Shuffle ON⬙ or ⬙Shuffle Off⬙. If the RND icon is showing on the radio display, then the shuffle mode is ON. fast will scroll through the list faster. During fast scroll, a slight delay in updating the information on the radio display may be noticeable. List Or Browse Mode During Play mode, pressing any of the buttons described below, will bring up List mode.
UNDERSTANDING YOUR INSTRUMENT PANEL 319 • Preset 6 – Podcasts • Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • To exit List mode without selecting a track, press the same PRESET button again to go back to Play mode. • LIST button: The LIST button will display the top level menu of the iPod威 or external USB device. Turn the TUNE control knob to list the top-menu item to be selected and press the TUNE control knob.
320 UNDERSTANDING YOUR INSTRUMENT PANEL 2. After the ⬙Ready⬙ prompt and the following beep, say Bluetooth Streaming Audio (BTSA) Music can be streamed from your cellular phone to the ⬙Setup⬙, then ⬙Select Audio Devices⬙. Uconnect™ phone system. 3. Say the name of the audio device or ask the Uconnect™ phone system to list audio devices.
UNDERSTANDING YOUR INSTRUMENT PANEL 321 UCONNECT™ MULTIMEDIA VIDEO ENTERTAINMENT SYSTEM (VES)™ — IF EQUIPPED Getting Started • Screen located in the overhead console : Unfold the overhead LCD screen by pushing the button on the overhead console behind the screen. • With the ignition switch in the ON or ACC position, turn the radio on by pushing the ON/OFF Volume Control knob.
322 UNDERSTANDING YOUR INSTRUMENT PANEL Or Press the LOAD button then corresponding number (1–6) where the DVD is to be loaded (Non-Touch-Screen). 2. Insert the DVD with the label facing up. The radio automatically selects the appropriate mode after the disc is recognized and displays the menu screen or starts playing the first track. 3. Ensure the VES™ Remote Control and the Headphone switch is on Channel 1. Using The Remote Control 1. Press the MODE button on the Remote Control.
UNDERSTANDING YOUR INSTRUMENT PANEL 323 Using The Touch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls. If a channel list appears on the right side of the screen, touch the HIDE LIST soft-key to display the Rear VES Controls screen. 4 Rear VES Soft-key 3. Touch the 1 soft-key and then the DISC soft-key in the MEDIA column. To exit touch the back arrow soft-key at the top left of the screen.
324 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The “1” and “2” soft-keys are displayed for the NOTE: headphone channels. Touch 1 or 2 based on which • To view a DVD on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then touch the DISC channel you want to change, select the new mode from tab soft-key and then the VIEW VIDEO soft-key. the available list on the right. Modes that are unavailable are greyed-out.
UNDERSTANDING YOUR INSTRUMENT PANEL 325 When connecting an external source to the AUX input, be Play Video Games Connect the video game console to the Auxiliary RCA sure to follow the standard color coding for the VES™ input jacks located on the back of the center console. jacks: NOTE: Certain high-end video games, such as Playstation3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter. Refer to the Power Inverter section in your vehicle’s Owner’s Manual for more information.
326 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control Using The Touch-Screen Radio Controls 1. Press the MODE button on the Remote Control. 1. Press the MENU hard-key on the radio faceplate. 2. While looking at the video screen, highlight VES AUX 2. Touch the Rear VES soft-key to display the Rear VES 1, by either pressing Up/Down/Left/Right buttons or by Controls.
UNDERSTANDING YOUR INSTRUMENT PANEL 327 3. Touch the 1 or 2 based on the headphone channel you Listen To An Audio Source On Channel 2 While A want to change. To exit press the back arrow soft-key at Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on the top of the screen. Channel 2. Using The Remote Control 1.
328 UNDERSTANDING YOUR INSTRUMENT PANEL 2. While looking at the video screen, either press Up/ Down/Left/Right on the Remote Control to highlight the desired audio source or repeatedly press the MODE button on the remote until the desired audio source appears on the screen. Using The Touch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES soft-key to display the Rear VES Controls.
UNDERSTANDING YOUR INSTRUMENT PANEL 329 3. To listen to an audio source on Channel 2 while a Important Notes For Single Video Screen System video is playing on Channel 1, touch the 2 soft-key and • VES™ is able to transmit two channels of stereo audio choose an audio source. To exit touch the back arrow simultaneously. soft-key at the top left of the left screen. • In split screen mode the left side equates to Channel 1 and right side equates to Channel 2.
330 UNDERSTANDING YOUR INSTRUMENT PANEL Play A DVD Using The Touch-Screen Radio 1. Press the OPEN/CLOSE or LOAD hard-key on the radio faceplate (Touch-Screen). 2. Insert the DVD with the label facing up. The radio automatically selects the appropriate mode after the disc is recognized and displays the menu screen or starts playing the first track. 3. To watch a DVD on Screen 1 for second row passengers, ensure the Remote Control and Headphone switch is on Channel 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 331 3. Touch the 1 or 2 soft-key based on the channel you want to change and then the DISC soft-key in the MEDIA 1. Press the MENU hard-key on the radio faceplate. column. To exit touch the back arrow at the top left of the 2. Touch the Rear VES soft-key to display the Rear VES screen. Controls. If a channel list is displayed, press the HIDE NOTE: LIST soft-key to display the Rear VES Controls screen.
332 UNDERSTANDING YOUR INSTRUMENT PANEL • Touching the screen on a Touch-Screen radio while a DVD is playing brings up basic remote control functions for DVD play such as scene selection, Play, Pause, FF, RW, and Stop. Pressing the X in the upper corner will turn off the remote control screen functions. Remote Control Controls And Indicators 1. Power – Turns the screen and wireless headphone transmitter for the selected Channel on or off.
UNDERSTANDING YOUR INSTRUMENT PANEL 333 the Channel 2, position the remote controls the function- 10. PROG Up/Down – When listening to a radio mode, ality of headphone Channel 2 (left side of the screen). pressing PROG Up selects the next preset and pressing PROG Down selects the previous preset stored in the 5. 䉴䉴 – In radio modes, press to seek the next tunable radio. When listening to compressed audio on a data station.
334 UNDERSTANDING YOUR INSTRUMENT PANEL 15. SETUP – When in a video mode, press the SETUP button to access the display settings (see the display settings section) to access the DVD setup menu, select the menu button on the radio. When a disc is loaded in the DVD player (if equipped) and the VES™ mode is selected and the disc is stopped, press the SETUP button to access the DVD Setup menu. (see the DVD Setup Menu of this manual.) 16.
UNDERSTANDING YOUR INSTRUMENT PANEL 335 vehicle is not equipped with a DVD player, follow the radio’s instructions to turn Video Lock on. The radio and the video screen(s) indicate when Video Lock is active. • Pressing the Video Lock again or turning the ignition OFF turns Video Lock OFF and allows remote control operation of the VES™. Replacing The Batteries The remote control requires two AAA batteries for operation.
336 UNDERSTANDING YOUR INSTRUMENT PANEL Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
UNDERSTANDING YOUR INSTRUMENT PANEL 337 Controls • When both switches are on Channel 2, the Remote is The headphone power indicator and controls are located controlling Channel 2 and the headphones are tuned on the right ear cup. to the audio of the VES™ Channel 2. NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off.
338 UNDERSTANDING YOUR INSTRUMENT PANEL How Long Does The Coverage Last? This warranty lasts Replacing The Batteries Each set of headphones requires two AAA batteries for as long as you own the Product. operation. To replace the batteries: What Does This Warranty Cover? Except as specified • Locate the battery compartment on the left ear cup of below, this warranty covers any Product that in normal the headphones, and then slide the battery cover use is defective in workmanship or materials. downward.
UNDERSTANDING YOUR INSTRUMENT PANEL 339 NATURE WHATSOEVER. Some states and jurisdictions may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may also have other rights, which vary from jurisdiction to jurisdiction. You may register your Unwired威 wireless headphones online at www.unwiredtechnology.com or by phone at 1-888-293-3332.
340 UNDERSTANDING YOUR INSTRUMENT PANEL selected radio mode. When shared, the radio has priority Information Mode Display over the VES™ or all radio modes (FM, AM). The VES™ has the ability to switch tuner (AM/FM), SEEK, SCAN, TUNE, and recall presets in radio modes as long as it is not in shared mode. When in shared disc both the radio and the VES™ have control of the video functions. The VES™ has the ability to control the following video modes: 1.
UNDERSTANDING YOUR INSTRUMENT PANEL 341 5. Channel 2 Shared Status Numeric Keypad Menu 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER Button Action 8. Channel 2 ENTER Button Action 9. Clock 4 10. Video Lock 11. Not Available / Error 12.
342 UNDERSTANDING YOUR INSTRUMENT PANEL When the display for either Channel 1 or Channel 2 shows DIRECT TUNE, pressing the remote control’s ENTER button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: Station List Menu When listening to Satellite audio, pressing the remote control’s MENU button displays a list of all available channels.
UNDERSTANDING YOUR INSTRUMENT PANEL 343 Disc Menu Display Settings 4 Disc Menu For CDs Video Screen Display Settings When listening to a CD Audio or CD Data disc, pressing the remote control’s MENU button displays a list of all commands which control playback of the disc. Using the options you can activate or cancel Scan play and Random play. When watching a video source (DVD Video with the disc in Play mode, Aux Video, SIRIUS Backseat TV™, etc.
344 UNDERSTANDING YOUR INSTRUMENT PANEL settings are already set for optimum viewing, so there is • Close the video screen. no need to change these settings under normal circum• To change the current audio mode, press the remote stances. control’s MODE button. This will automatically select the next available audio mode without using the Mode To change the settings, press the remote control’s naviSelect menu.
UNDERSTANDING YOUR INSTRUMENT PANEL 345 DVD Audio Support Disc Formats The VES™ DVD player is capable of playing the followWhen a DVD-Audio disc is inserted in the VES™ DVD ing types of discs (12 mm or 8 mm diameter): player, the DVD-Audio title on the disc is played by • DVD-Video discs (MPEG-2 video compression) (see default (most DVD-Audio discs also have a Video title, but the Video title is ignored).
346 UNDERSTANDING YOUR INSTRUMENT PANEL If you record a disc using a personal computer, there may be cases where the VES™ DVD player may not be able to play some or the entire disc, even if it is recorded in a compatible format and is playable on other players. To help avoid playback problems, use the following guidelines when recording discs. • Mixed media recordable DVD formats will only play the Video_TS portion of the disc.
UNDERSTANDING YOUR INSTRUMENT PANEL 347 end with the extension ⬙.mp3⬙ or ⬙.MP3⬙ and WMA • If you are creating your own files, the recommended files must always end with the extension ⬙.wma⬙ or fixed bit rate for MP3 files is between 96 and 192Kbps ⬙.WMA⬙. To prevent incorrect playback, do not use and the recommended fixed bit rate for WMA files is these extensions for any other types of files. between 64 and 192Kbps. Variable bit rates are also supported.
348 UNDERSTANDING YOUR INSTRUMENT PANEL and the disc is automatically ejected. A dirty, damaged, or Display incompatible disc format are all potential causes for a Other Language Setup ⬙Disc Error⬙ message. If a disc has a damaged track which results in audible or visible errors that persists for 2.0 seconds, the DVD player will attempt to continue playing the disc by skipping forward 1.0 to 3.0 seconds at a time.
UNDERSTANDING YOUR INSTRUMENT PANEL 349 All of the Language settings have a special ⬙Other⬙ setting • Using the remote control Up and Down cursor butto accommodate languages other than Japanese or Engtons, select a digit for the current position. After lish. These languages are selected using a special fourselecting the digit, press the remote control’s Right digit code. cursor button to select the next digit. Repeat this digit selection sequence for all four digits.
350 UNDERSTANDING YOUR INSTRUMENT PANEL Here is an abbreviated list of language codes. For more When a DVD-Video disc is loaded, its rating is compared language codes, please contact the dealer where the to the setting in the DVD player. If the rating of the disc vehicle was purchased. is higher than the setting in the player, a Password screen is displayed.
UNDERSTANDING YOUR INSTRUMENT PANEL 351 To set the password, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control Left and Right cursor buttons, select the Rating tab. • Highlight ⬙Change Password⬙, and then press the remote control’s ENTER button. • Enter the current password. Select a digit, use the remote control Up and Down cursor buttons to set the value for the current digit, and then press the remote control’s Right cursor button to select the next digit.
352 UNDERSTANDING YOUR INSTRUMENT PANEL • After the four-digit password is entered, press the To set the rating, activate the DVD Setup Menu and remote control’s ENTER button to accept the change. follow these additional instructions: • Using the remote control’s Left and Right cursor buttons, select the Rating tab. • Highlight ⬙Change Rating⬙, and then press the remote control’s ENTER button. • Enter the current password.
UNDERSTANDING YOUR INSTRUMENT PANEL 353 Dolby威 Digital and MLP Lossless Manufactured • Using the remote control’s Up and Down cursor under license from Dolby Laboratories. ⬙Dolby⬙, buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change. ⬙MLP Lossless⬙, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Product Agreement Copyright 1992-1997 Dolby Laboratories.
354 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a pushbutton in the center. Pressing the top of the switch will increase the volume, and pressing the bottom of the switch will decrease the volume.
UNDERSTANDING YOUR INSTRUMENT PANEL 355 The button located in the center of the left hand control CD/DVD DISC MAINTENANCE will tune to the next pre-set station that you have To keep a CD/DVD in good condition, take the following precautions: programmed in the radio pre-set pushbuttons. CD Player Pressing the top of the switch once will go to the next track on the CD.
356 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. throughout the vehicle. The controls are located on the instrument panel below the radio.
UNDERSTANDING YOUR INSTRUMENT PANEL 357 dials and inner push knobs. These comfort controls can Front Blower Control There are four blower speeds. Use this be set to obtain desired interior conditions. control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the OFF position.
358 UNDERSTANDING YOUR INSTRUMENT PANEL temperatures. Rotating the knob clockwise, into the red Panel Mode Air is directed through the outlets in the instrument area, indicates warmer temperatures. panel. These outlets can be adjusted to direct airflow. NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- Bi-Level Mode Air is directed through the panel and floor outlets. denser (located in front of the radiator), for an accumulation of dirt or insects.
UNDERSTANDING YOUR INSTRUMENT PANEL 359 Mix Mode Recirculation Control Air is directed through the floor, defrost and side Press this button to choose between window demist outlets. This setting works best in outside air intake or recirculation of cold or snowy conditions that require extra heat at the air inside the vehicle. A LED will the windshield. This setting is good for maintaining illuminate when you are in Recirculacomfort, while reducing moisture on the windshield. tion mode.
360 UNDERSTANDING YOUR INSTRUMENT PANEL • In cold or damp weather, the use of the Recirculation mode will cause windows to fog on the inside because of moisture buildup inside the vehicle. For maximum defogging, select the outside air position. Economy Mode If ECONOMY mode is desired, press the A/C button to turn off the LED indicator and the A/C compressor. Rotate the temperature control knob to the desired temperature.
UNDERSTANDING YOUR INSTRUMENT PANEL 361 MAX A/C Automatic Temperature Control (ATC) — If For maximum cooling, when MAX Equipped A/C is selected the A/C is turned on • The Automatic Temperature Control (ATC) allows automatically and the air is recircuboth driver and front passenger seat occupants to lated. select individual comfort settings.
362 UNDERSTANDING YOUR INSTRUMENT PANEL • The system provides set-and-forget operation for optimum comfort and convenience. • The system can be controlled manually, if desired. • SYNC feature links the temperature controls, the passenger side temperature becomes the same as the temperature selected by the driver. The ATC system automatically maintains the interior comfort level desired by the driver and all passengers.
UNDERSTANDING YOUR INSTRUMENT PANEL 363 NOTE: • It is not necessary to move the temperature settings for 1. Position the MODE control knob to the Auto position cold or hot vehicles. The system automatically adjusts on the Automatic Temperature Control (ATC) Panel. the temperature, mode and fan speed to provide 2. Position the BLOWER control knob in the Auto posicomfort as quickly as possible. tion on the ATC Panel. • The temperature can be displayed in U.S.
364 UNDERSTANDING YOUR INSTRUMENT PANEL selected. This allows the front occupants to control the Manual Operation This system offers a full complement of manual override volume of air circulated in the vehicle and cancel the Auto mode. features. NOTE: Each of these features operate independently The operator can also select the direction of the airflow from each other. If any one feature is controlled manually, by selecting one of the following positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 365 The Air Conditioning (A/C) button allows the Floor Mode Air comes from the floor outlets. A slight amount of operator to manually activate or deactivate the air conditioning system. When in A/C mode and the air is directed through the defrost and side window ATC is set to a cool temperature, dehumidified air flows demister outlets. through the air outlets.
366 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation Control When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the RECIRCULATION control button. Recirculation mode should only be used temporarily. The recirculation LED will illuminate on the blower control knob when this button is selected. Push the button a second time to turn off the Recirculation mode LED and allow outside air into the vehicle.
UNDERSTANDING YOUR INSTRUMENT PANEL 367 Vacation/Storage Any time you store your vehicle or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in fresh air with the blower setting in high. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. Window Fogging and Frosting Vehicle windows tend to fog on the inside of the glass in mild, rainy and/or humid weather.
368 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 375 䡵 Automatic Transmission . . . . . . . . . . . . . . . . . 378 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 375 ▫ Key Ignition Park Interlock . . . . . . . . . . . . . 380 ▫ Automatic Transmission . . . . . . . . . . . . . . . 375 ▫ Brake/Transmission Shift Interlock System . . 380 ▫ Extreme Cold Weather (Below –20°F Or ⫺29°C) . . . . . . . . . . . . . . .
370 STARTING AND OPERATING 䡵 Four-Wheel Drive Operation — If Equipped . . 411 ▫ Manually Shifted Transfer Case – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 411 ▫ Shifting Procedure – Manually Shifted Transfer Case . . . . . . . . . . . . . . . . . . . . . . . 413 ▫ Transfer Case Position Indicator Light . . . . . . 414 ▫ Electronically Shifted Transfer Case (Four-Position Switch) – If Equipped . . . . . . . 414 ▫ Shifting Procedure . . . . . . . . . . . . . . . . . . .
STARTING AND OPERATING 371 䡵 Driving On Slippery Surfaces . . . . . . . . . . . . . 451 ▫ Operating Your Winch . . . . . . . . . . . . . . . . . 461 ▫ Acceleration . . . . . . . . . . . . . . . . . . . . . . . . 451 ▫ Rigging Techniques . . . . . . . . . . . . . . . . . . . 474 ▫ Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . 452 䡵 Power Steering . . . . . . . . . . . . . . . . . . . . . . . 476 䡵 Driving Through Water . . . . . . . . . . . . . . . . .
372 STARTING AND OPERATING ▫ Hill Start Assist (HSA) – If Equipped . . . . . . 483 ▫ Tire Pressures For High Speed Operation . . . 504 ▫ Electronic Stability Control (ESC) – If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 486 ▫ Radial Ply Tires . . . . . . . . . . . . . . . . . . . . . 504 ▫ ESC Activation/Malfunction Indicator Light And ESC Off Indicator Light . . . . . . . . . . . . 490 ▫ Trailer Sway Control (TSC) – If Equipped . . . 491 䡵 Tire Safety Information . . . . . . . . . .
STARTING AND OPERATING 373 䡵 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 513 ▫ Reformulated Gasoline . . . . . . . . . . . . . . . . 531 䡵 Tire Rotation Recommendations . . . . . . . . . . . 514 ▫ Gasoline/Oxygenate Blends . . . . . . . . . . . . . 531 ▫ Directional Tires – If Equipped . . . . . . . . . . . 515 ▫ E-85 Usage In Non-Flex Fuel Vehicles . . . . . . 531 ▫ Dual Rear Wheels – If Equipped . . . . . . . . . 515 ▫ MMT In Gasoline . . . . . . . . . . . . . . . . . . . .
374 STARTING AND OPERATING ▫ Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 537 ▫ Trailer And Tongue Weight . . . . . . . . . . . . . 551 ▫ Cruising Range . . . . . . . . . . . . . . . . . . . . . . 537 ▫ Towing Requirements . . . . . . . . . . . . . . . . . 552 ▫ Replacement Parts . . . . . . . . . . . . . . . . . . . 538 ▫ Towing Tips . . . . . . . . . . . . . . . . . . . . . . . . 562 ▫ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 538 䡵 Snowplow . . . . . . . . . . .
STARTING AND OPERATING 375 STARTING PROCEDURES Normal Starting Before starting your vehicle, adjust your seat, adjust both Normal starting of either a warm or cold engine is inside and outside mirrors, and fasten your seat belt. obtained without pumping or pressing the accelerator pedal. Turn the key fob to the START position and release The starter should not be operated for more than 15when the engine starts. If the engine fails to start within second intervals.
376 STARTING AND OPERATING Tip Start Feature Do not press the accelerator. Turn the ignition switch briefly to the START position and release it. The starter motor will continue to run but will automatically disengage when the engine is running. Extreme Cold Weather (Below –20°F or ⫺29°C) To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (available from your authorized dealer) is recommended.
STARTING AND OPERATING 377 WARNING! (Continued) • If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to “Jump Starting” in “What To Do In Emergencies” for further information. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key fob is released.
378 STARTING AND OPERATING It includes a removable cap that is secured by a tethered AUTOMATIC TRANSMISSION strap. It also has a c-clip that is used for storage when not CAUTION! in use for the winter months. During winter months, remove the heater cord wiring assembly from itself on Damage to the transmission may occur if the followthe c-clip.
STARTING AND OPERATING 379 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob. Once the key fob is removed, the shift lever is locked in the PARK position, securing the vehicle against unwanted movement.
380 STARTING AND OPERATING Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key fob can only be removed from the ignition when the ignition is in the LOCK/OFF position, and once removed the shift lever is locked in PARK.
STARTING AND OPERATING 381 The transmission shift lever has only PARK, REVERSE, NEUTRAL, and DRIVE shift positions. Manual downshifts can be made using the Electronic Range Select (ERS) shift control (described later in this section). Pressing the ERS (-/+) switches (column shift) or moving the shift lever to the left or right (-/+) (console shift) while in the DRIVE position will select the highest available transmission gear, and will display that gear in the instrument cluster as 4, 3, 2, 1.
382 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others if it is not completely in PARK. Check by trying to move the shift lever clockwise without first pulling it toward you (column shift), or rearward with the brake pedal released (floor shift), after you have placed it in PARK. Make sure the transmission is in PARK before leaving the vehicle.
STARTING AND OPERATING 383 CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Release the shift lever and make sure it is fully seated in the PARK gate.
384 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with shift lever in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING 385 range of torque converter clutch engagement. This is limited to second gear only. Normal operation will redone to prevent transmission damage due to overheat- sume once the transmission temperature has risen to a suitable level. ing. If the transmission becomes extremely hot, the “Transmission Temperature Warning Light” may illuminate and the transmission may downshift out of Overdrive until the transmission cools down.
386 STARTING AND OPERATING 2. Shift the transmission into PARK. Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift control allows the 3. Turn the ignition switch to the LOCK/OFF position. driver to limit the highest available gear when the shift lever is in the DRIVE position. For example, if you shift 4. Wait approximately 10 seconds. the transmission into 3 (third gear), the transmission will 5. Restart the engine. never shift above third gear, but will shift down into 6.
STARTING AND OPERATING 387 5 Column Shift Lever Console Shift Lever To exit ERS mode, simply press and hold the shift lever to the right (+) (console shift) or the ERS (+) switch (column shift) until “D” is once again displayed in the shift lever position indicator in the instrument cluster.
388 STARTING AND OPERATING WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing an accident or personal injury. Screen Display Actual Gear(s) Allowed 1 1 2 1-2 3 1-3 4 1-4 D 1-4 Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fourth gear).
STARTING AND OPERATING 389 HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting. When operating in TOW/HAUL mode, the transmission will downshift into third gear. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate that TOW/HAUL mode has been activated. Pressing the switch a second time restores normal operation.
390 STARTING AND OPERATING converter clutch is not engaged, it may seem as if the transmission is not shifting into Overdrive when cold. This is normal. Using the Electronic Range Select (ERS) feature, when the transmission is sufficiently warm, will demonstrate that the transmission is able to shift into and out of Overdrive. The electronically-controlled transmission provides a precise shift schedule.
STARTING AND OPERATING 391 shift) while in the DRIVE position will select the highest transmission locking mechanism may make it difficult to available transmission gear, and will display that gear in move the shift lever out of PARK. As an added precaution, turn the front wheels toward the curb on a downhill the instrument cluster as 6, 5, 4, 3, 2, 1. grade and away from the curb on an uphill grade Gear Ranges DO NOT race the engine when shifting from PARK or WARNING! NEUTRAL into another gear range.
392 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
STARTING AND OPERATING 393 CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Release the shift lever and make sure it is fully seated in the PARK gate.
394 STARTING AND OPERATING WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
STARTING AND OPERATING 395 If the transmission operating temperature exceeds normal operating limits, the powertrain controller will modify the transmission shift schedule and expand the range of torque converter clutch engagement. This is done to prevent transmission damage due to overheating. If the transmission becomes extremely hot, the “Transmission Temperature Warning Light” may illuminate and the transmission may downshift out of Overdrive until the transmission cools down.
396 STARTING AND OPERATING PARK, REVERSE, and NEUTRAL will continue to operate. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
STARTING AND OPERATING 397 Use of ERS (or TOW/HAUL mode) also enables an shift the transmission down to ERS 3 (the added underadditional underdrive gear which is not normally used drive gear). Once in ERS mode, tapping ERS (-) or (+) will during through-gear accelerations. This additional gear change the top available gear. can improve vehicle performance and cooling capability when towing a trailer on certain grades. In ERS mode, gears 1 though 3 are underdrive gears, and ERS 4 is direct drive.
398 STARTING AND OPERATING WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing and accident or personal injury.
STARTING AND OPERATING 399 Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fourth and fifth gears). The transmission will automatically shift into the Overdrive gear if the following conditions are present: • the shift lever is in the DRIVE position, HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
400 STARTING AND OPERATING The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate that TOW/HAUL mode has been activated. Pressing the switch a second time restores normal operation. If the TOW/HAUL mode is desired, the switch must be pressed each time the engine is started. warm [usually after 1 to 3 miles (1.6 to 4.8 km) of driving].
STARTING AND OPERATING 401 Six–Speed Automatic Transmission (5.7L Engine) — 2500 Models Only The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. The shift lever is mounted on the right side of the steering column. You must press the brake pedal to move the shift lever out of the PARK position (refer to “Brake/ Transmission Shift Interlock System” in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position.
402 STARTING AND OPERATING PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the PARK position first, and then apply the parking brake.
STARTING AND OPERATING 403 WARNING! (Continued) WARNING! (Continued) • It is dangerous to move the shift lever out of PARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your foot is firmly pressing the brake pedal.
404 STARTING AND OPERATING CAUTION! • Before moving the shift lever out of PARK, you must turn the ignition switch from the LOCK/OFF position to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this can damage the drivetrain. • Look at the shift lever position display and verify that it indicates the PARK position.
STARTING AND OPERATING 405 WARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. CAUTION! Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result in severe transmission damage.
406 STARTING AND OPERATING If the transmission operating temperature exceeds normal operating limits, the powertrain controller will modify the transmission shift schedule and expand the range of torque converter clutch engagement. This is done to prevent transmission damage due to overheating. If the transmission becomes extremely hot, the “Transmission Temperature Warning Light” may illuminate and the transmission may downshift out of Overdrive until the transmission cools down.
STARTING AND OPERATING 407 to operate. Limp Home Mode allows the vehicle to be NOTE: Even if the transmission can be reset, we recomdriven to an authorized dealer for service without dam- mend that you visit your authorized dealer at your aging the transmission. earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could In the event of a momentary problem, the transmission recur.
408 STARTING AND OPERATING switch will activate ERS mode, display the current gear in To exit ERS mode, simply press and hold the ERS (+) the instrument cluster, and maintain that gear as the top switch until “D” is once again displayed in the shift lever available gear. Once in ERS mode, tapping ERS (-) or (+) position indicator in the instrument cluster. will change the top available gear. WARNING! Do not downshift for additional engine braking on a slippery surface.
STARTING AND OPERATING 409 Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fifth and sixth gears). The transmission will automatically shift into the Overdrive gear if the following conditions are present: • the shift lever is in the DRIVE position, HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
410 STARTING AND OPERATING The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate that TOW/HAUL mode has been activated. Pressing the switch a second time restores normal operation. If the TOW/HAUL mode is desired, the switch must be pressed each time the engine is started. transmission fluid and engine coolant are warm [usually after 1 to 3 miles (1.6 to 4.8 km) of driving].
STARTING AND OPERATING 411 FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED Four-wheel drive trucks are equipped with either a manually shifted transfer case or an electronically shifted transfer case. Refer to the operating instructions for your transfer case, located in this section for further information. Manually Shifted Transfer Case – If Equipped The transfer case provides four mode positions.
412 STARTING AND OPERATING When operating your vehicle in 4L, the engine speed is approximately three times that of the 2H or 4H positions at a given road speed. Take care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type and circumference on each wheel. Any difference will adversely affect shifting and can cause damage to the drivetrain.
STARTING AND OPERATING 413 and maximum pulling power for loose, slippery road 2H Rear-Wheel Drive High Range - This range is for normal surfaces only. Do not exceed 25 mph (40 km/h). street and highway driving on dry hard surfaced roads. Shifting Procedure – Manually Shifted Transfer Case 4H Four-Wheel Drive High Range - This range locks the 2H ⇔ 4H front and rear driveshafts together forcing the front and Shifting between 2H and 4H can be made with the rear wheels to rotate at the same speed.
414 STARTING AND OPERATING with the vehicle moving faster than 2 to 3 mph (3 to NOTE: 5 km/h). • Pausing in transfer case NEUTRAL in vehicles equipped with an automatic transmission may require • Do not attempt to shift into or from 4L while the shutting the engine OFF to avoid gear clash while transmission is in gear. completing the shift. If difficulty occurs, shift the transmission into NEUTRAL, hold foot on brake, and Transfer Case Position Indicator Light turn the engine OFF.
STARTING AND OPERATING 415 • Neutral (NEUTRAL) This electronically shifted transfer case is designed to be driven in the two-wheel drive position (2WD) for normal street and highway conditions on dry, hard surfaced roads. When additional traction is required, the transfer case 4WD LOCK and 4WD LOW positions can be used to lock the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same speed.
416 STARTING AND OPERATING NOTE: The transfer case NEUTRAL position is selected by pressing the recessed button located on the lower left hand corner of the 4WD Control Switch. The transfer case NEUTRAL position is to be used for recreational towing only. Refer to “Recreational Towing” in “Starting and Operating” for further information. 3. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON.
STARTING AND OPERATING 417 The “SVC 4WD Warning Light” monitors the electronic shift four-wheel drive system. If this light remains on after engine start up or illuminates during driving, it means that the four-wheel drive system is not functioning properly and that service is required. WARNING! Always engage the parking brake when powering down the vehicle if the “SVC 4WD Warning Light” is illuminated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury.
418 STARTING AND OPERATING WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL position without first fully engaging the parking brake. The transfer case NEUTRAL position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move regardless of the transmission position. The parking brake should always be applied when the driver is not in the vehicle.
STARTING AND OPERATING 419 Shifting Procedure 2WD⇔ 4WD LOCK Rotate the 4WD control switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. With the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after turning the control switch. If the vehicle is stopped, the ignition switch must be in the ON position with the engine either running or off.
420 STARTING AND OPERATING 2WD Or 4WD LOCK⇔ 4WD LOW Alternate Procedure NOTE: When shifting into or out of 4WD LOW some 1. Bring the vehicle to a complete stop. gear noise may be heard. This noise is normal and is not 2. With the ignition switch in the ON position and the detrimental to the vehicle or occupants. engine either OFF or running, shift the transmission into Shifting can be performed with the vehicle rolling 2 to NEUTRAL. 3 mph (3 to 5 km/h) or completely stopped. You can use 3.
STARTING AND OPERATING 421 • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing.
422 STARTING AND OPERATING • Four-wheel drive low range (4WD LOW) • Neutral (NEUTRAL) This electronically shifted transfer case is designed to be driven in the two–wheel drive position (2WD) or fourwheel drive position (4WD AUTO) for normal street and highway conditions on dry hard surfaced roads). Driving the vehicle in 2WD will have greater fuel economy benefits as the front axle is not engaged in 2WD. For variable driving conditions, the 4WD AUTO mode can be used.
STARTING AND OPERATING 423 Transfer Case Position Indicator Lights The Transfer Case Position Indicator Lights (4WD, 4LOW, and 4WD AUTO) are located on the instrument cluster and indicate the current and desired transfer case selection. When you select a different transfer case position, the position indicator lights will do the following: 2. The newly selected position indicator light will continue to flash. 3. The transfer case will not shift.
424 STARTING AND OPERATING WARNING! Always engage the parking brake when powering down the vehicle if the “SVC 4WD Warning Light” is illuminated. Not engaging the parking brake may allow the vehicle to roll which may cause personal injury. NOTE: Do not attempt to make a shift while only the front or rear wheels are spinning. This could cause damage to driveline components.
STARTING AND OPERATING 425 For additional information on the appropriate use of each 4WD LOW transfer case mode position, see the information below: Four-Wheel Drive Low Range - This range provides low speed four-wheel drive. Locks the front and rear drive2WD shafts together forcing the front and rear wheels to rotate Rear-Wheel Drive High Range - This range is for normal at the same speed. Additional traction and maximum street and highway driving on dry hard surfaced roads.
426 STARTING AND OPERATING position will remain ON, and the newly selected position indicator light will continue to flash until all the requirements for the selected position have been met. To retry a shift: return the control knob back to the original position, make certain all shift requirements have been met, wait five seconds and try the shift again.
STARTING AND OPERATING 427 2. Shift the transmission into NEUTRAL. NOTE: • If Steps 1 or 2 of either the Preferred or Alternate 3. While still rolling, rotate the transfer case control Procedure are not satisfied prior to attempting the shift switch to the desired position. or if they no longer are being met while the shift attempt is in process, the desired position indicator 4.
428 STARTING AND OPERATING AXLE LOCKER SYSTEM (2500 MODELS ONLY) — CAUTION! IF EQUIPPED This vehicle is equipped with electronically locking front • Do not lock the front or rear axle on hard surfaced and rear differentials. These differentials, when engaged, roads. The ability to steer the vehicle is reduced mechanically lock together the axle shafts forcing the and damage to the drivetrain may occur when the wheels to spin at an equal rate.
STARTING AND OPERATING 429 position, the rear axle is locked. In the FRONT/REAR NOTE: Left to right wheel speed difference may be LOCK position, the front and rear axles are locked. necessary to allow the axle to fully lock.
430 STARTING AND OPERATING NOTE: The rear axle must be locked before the front STABILIZER/SWAY BAR SYSTEM — POWER axle will lock. WAGON ONLY Your vehicle is equipped with an electronic disconnecting To unlock the front axle; move the axle locker switch to stabilizer/sway bar. This system allows greater front REAR LOCK. The FRONT/REAR LOCK indicator light suspension travel in off-road situations. will go out when the axle is unlocked.
STARTING AND OPERATING 431 WARNING! 1 — On Road 2 — Off Road Do not disconnect the stabilizer bar and drive on hard surfaced roads or at speeds above 18 mph (29 km/h), you may lose control of the vehicle, which could result in serious injury. The front stabilizer bar enhances vehicle stability and is necessary for maintaining control of the vehicle. The system monitors vehicle speed and will attempt to reconnect the stabilizer bar at speeds over 18 mph (29 km/h).
432 STARTING AND OPERATING the Off-Road position. The amber indicator light will flash until the stabilizer/sway bar has been fully disconnected. WARNING! If the stabilizer/sway bar will not return to On-Road mode, vehicle stability is greatly reduced. Do not attempt to drive the vehicle over 18 mph (29 km/h). Driving faster than 18 mph (29 km/h) may cause loss of control of the vehicle, which could result in serious injury. Contact your local service center for assistance.
STARTING AND OPERATING 433 (ORV) trails or recreation areas. You should always tread lightly and only use established roads, trails or ORV recreational areas. The National Forest Service, Bureau of Land Management or local Department of Natural Resources are a wealth of information and usually have maps with marked trails. Skid Plates And Underbody Protection Steel skid plates protect the major driveline components of the truck including the fuel tank, transfer case and steering damper.
434 STARTING AND OPERATING CAUTION! The door sill height is 25 inches. Water may intrude into the interior of the vehicle at greater depths. Simultaneous Brake And Throttle Operation Many off-road driving conditions require the simultaneous use of the brake and throttle (two footed driving). When climbing rocks, logs, or other stepped objects, using light brake pressure with light throttle will keep the vehicle from jerking or lurching.
STARTING AND OPERATING 435 Driving In Snow, Mud And Sand There is a drastic reduction in traction when driving in Always wear your seat belt and firmly tie down snow, mud or sand. The vehicle will be less responsive to cargo. Unsecured cargo can become projectiles in an steering, acceleration and braking inputs. Therefore you should accelerate slowly, leave greater stopping distances off-road situation. and avoid abrupt vehicle maneuvers. You want to keep a slow constant steady pace.
436 STARTING AND OPERATING CAUTION! On icy or slippery roads, do not downshift at high engine RPMs or vehicle speeds because engine braking may cause skidding and loss of control. • Mud – Deep mud creates a great deal of suction around the tires and is very difficult to get through. You should use 4L (Low Range) with a gear low enough to maintain your momentum without shifting.
STARTING AND OPERATING 437 CAUTION! Reduced tire pressures may cause tire unseating and total loss of air pressure. To reduce the risk of tire unseating, while at a reduced tire pressure, reduce your speed and avoid sharp turns or abrupt maneuvers. Crossing Obstacles (Rocks And Other High Points) While driving off road, you will encounter many types of terrain. These varying types of terrain bring different types of obstacles.
438 STARTING AND OPERATING Crossing Large Rocks When approaching large rocks, choose a path which ensures you drive over the largest with your tires. This will lift your undercarriage over the obstacle. The tread of the tire is tougher and thicker than the side wall and is designed to take the abuse. Always look ahead and make every effort to cross the large rocks with your tires. CAUTION! independently. You need to use caution when crossing large obstacles with steep sides.
STARTING AND OPERATING 439 accelerator to avoid spinning the log out from under your tires. Then ease the vehicle off the log using your brakes. CAUTION! CAUTION! Winching or rocking the vehicle off hard objects increases the risk of underbody damage. Do not attempt to cross a log with a greater diameter than the running ground clearance or the vehicle will become high centered.
440 STARTING AND OPERATING the vehicle if something goes wrong? If everything looks good and you feel confident, then change transmission into a lower gear, shift the transfer case into 4L (Low) and proceed with caution. You should use first gear and 4L (Low Range) for very steep hills. fresh ⬙bite⬙ into the surface and will usually provide enough traction to complete the climb.
STARTING AND OPERATING 441 ability to proceed then make sure you are in 4L (Low Range) with the transmission in first gear (manually select first gear on automatic transmissions) and proceed with caution. Allow engine braking to control the descent and apply your brakes if necessary, but do not allow the tires to lock. WARNING! Do not descend a steep grade in NEUTRAL. Use vehicle brakes in conjunction with engine braking.
442 STARTING AND OPERATING WARNING! If the engine stalls or you lose headway or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle, which may result in severe injury. Always back carefully straight down a hill in REVERSE. Never back down a hill in NEUTRAL using only the vehicle brakes. Never drive diagonally across a hill, always drive straight up or down.
STARTING AND OPERATING 443 CAUTION! Water ingestion into the axles, transmission, transfer case, engine or vehicle interior can occur if you drive too fast or through too deep of water. Water can cause permanent damage to engine, driveline or other vehicle components and your brakes will be less effective once wet and/or muddy • Before You Cross Any Type Of Water – As you approach any type of water you need to determine if you can cross it safely and responsibly.
444 STARTING AND OPERATING CAUTION! Muddy waters can reduce the cooling system effectiveness by depositing debris onto the radiator. • Crossing Ditches, Streams, Shallow Rivers Or Other Flowing Water – Flowing water can be extremely dangerous. Never attempt to cross a fast running stream or river even in shallow water. Fast moving water can easily push your vehicle downstream sweeping it out of control.
STARTING AND OPERATING 445 form to the ground contour. Different terrain, tires, and vehicles require different tire pressure. Hard surfaces like rock and heavier vehicles require higher pressures than softer surfaces such as sand and lighter vehicles. You will need to experiment to determine what is right for your situation. It is easier and faster to let air out than it is to replace it so, start high and lower it as required.
446 STARTING AND OPERATING vehicle impingement on the surroundings, then using a • Rock Cycling Your Vehicle – Rock cycling your vetow strap to the vehicle tow hooks would be fast and hicle is one of the easiest, fastest and most commonly easy. If the vehicle is severely hung up or in a situation used methods. This simply involves shifting your where great care needs to be taken during the recovery, vehicle from DRIVE to REVERSE, while applying then nothing can do the job better than a winch.
STARTING AND OPERATING 447 CAUTION! Damage can occur when spinning your tires at an excessive high speed. Do not spin your tires faster than an indicated 35 mph (56 km/h). • Using The Tow Hooks With A Tow Strap – Tow straps are a quick and easy way to recover your vehicle from minor situations if you have a secondary vehicle which is not stuck. The tow hooks on your vehicle are designed to take the abusive force generated during vehicle recovery.
448 STARTING AND OPERATING WARNING! Never use tow straps with end hooks or link two straps with a clevis pin. These heavy metal objects could become projectiles if a strap breaks, which could cause severe injury. Never leave more than two or three feet of slack in the strap. More slack than this greatly increases the risk of injury and vehicle damage. Always keep everyone at least 30 feet away from a strapping or winching situation.
STARTING AND OPERATING 449 as you power the winch in. Be careful not to allow slack in the cable as you recover the vehicle. Do not try to guide the cable into the drum. If it starts to bunch up on one end, let it. You can re-spool the cable afterwards. Never use a winch cable as a tow strap and always stand back while winching. WARNING! Winch cables are under high tension when in use and can become a projectile if they fail. Never stand over or straddle the winch cable.
450 STARTING AND OPERATING • After extended operation in mud, sand, water, or similar dirty conditions, have the radiator, fan, brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. WARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent a collision.
STARTING AND OPERATING 451 WARNING! On vehicles equipped with a limited-slip differential never run the engine with one rear wheel off the ground since the vehicle may drive through the rear wheel remaining on the ground. You could lose control of the vehicle. Care should be taken to avoid sudden accelerations when both rear wheels are on a slippery surface. This could cause both rear wheels to spin, and allow the vehicle to slide sideways on the crowned surface of a road or in a turn.
452 STARTING AND OPERATING Traction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precautions should be observed: 1. Slow down during rainstorms or when the roads are slushy. 2. Slow down if the road has standing water or puddles. 3.
STARTING AND OPERATING 453 Shallow Standing Water Although your vehicle is capable of driving through shallow standing water, consider the following Caution and Warning before doing so. CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
454 STARTING AND OPERATING WARNING! • Driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • Driving through standing water limits your vehicle’s braking capabilities, which increases stopping distances. Therefore, after driving through standing water, drive slowly and lightly press on the brake pedal several times to dry the brakes.
STARTING AND OPERATING 455 always a good idea to check for damage. That way you • After extended operation in mud, sand, water, or can get any problems taken care of right away and have similar dirty conditions, have the radiator, fan, brake your vehicle ready when you need it. rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. • Completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and WARNING! exhaust system for damage.
456 STARTING AND OPERATING WINCH USAGE (POWER WAGON ONLY) — IF EQUIPPED Things To Know Before Using Your Winch General Winch Information Your vehicle is equipped with an electric vehicle recovery winch. This winch uses the electrical power from the vehicle charging system to power a motor that winds wire rope into the winch drum via planetary gear reduction. By nature, a winch is capable of generating very high forces and should be used with care.
STARTING AND OPERATING 457 Low Voltage Interrupt Your winch is equipped with a device that will interrupt winch function if the vehicle charging system voltage drops to a low level. The winch will not power-in or out for 30 seconds if this device is tripped. If the interrupt is tripped, the vehicle should be operated at high idle for a few minutes to allow the vehicle charging system to recover before continuing to winch.
458 STARTING AND OPERATING Understanding The Features Of Your Winch Winch Components
STARTING AND OPERATING 459 1. Motor: The winch motor is powered by the vehicle 6. Clutch Lever: The clutch lever allows the winch drum charging system and features a thermal protection switch to be disconnected from the winch motor to allow the that automatically stops motor function in the power-in wire rope to be pulled from the winch by hand. direction if the motor gets too hot. 7. Remote Control: The remote control provides the 2.
460 STARTING AND OPERATING Winch Accessories The following accessories are necessary to attach the winch to anchors, change direction of pull, and for safe winching. Gloves: Wire rope, through use, will develop ⬙barbs⬙ which can slice skin. It is extremely important to wear protective gloves while operating the winch or handling the wire rope. Avoid loose fitting clothes or anything that could become entangled in the wire rope and other moving parts.
STARTING AND OPERATING 461 Clevis/D-Shackles: The Operating Your Winch D-Shackle is a safe means of WARNING! connecting the looped ends of cables, straps and snatch Failure to observe any of these warnings regarding blocks. The shackle’s pin is proper winch usage may result in severe injury. threaded to allow easy re• Always use supplied hook strap to hold the hook moval. when spooling wire rope in or out. • Never use as a hoist. • Never use to move persons.
462 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Always stand clear of wire rope and load and keep others away during winching. • Always keep hands and clothing clear of the wire rope, hook and fairlead opening during operation and when spooling. • Never wrap wire rope back onto itself. Always use a choker chain, wire choker rope or tree trunk protector on the anchor. • Never attach a recovery strap to the winch hook to increase the length of a pull.
STARTING AND OPERATING 463 3. Use the right equipment for the situation. 4. Always wear leather gloves and do not allow the wire rope to slip through your hands when handling the rope. 5. Only the operator should handle the wire rope and remote control. 6. Think safety at all times.
464 STARTING AND OPERATING CAUTION! (Continued) • Be careful not to pull the Winch Cable Collar through the rollers. Watch and listen to Winch for proper snugness. 1. Inspect the winch, winch mount, and wire rope for damage. Do not use the winch if the mount is loose or rope shows excessive wear or damage. 2. Put on gloves. 3. Disengage the clutch to allow free spooling of the winch drum, rotate the clutch lever on the winch to disengage. Freespooling conserves battery power.
STARTING AND OPERATING 465 5 Free Spool 4. Free the winch hook and attach the hook strap. Free the winch hook from its anchor point. Attach the hook strap to the hook (if not attached).
466 STARTING AND OPERATING 5. Pull the wire to the anchor point. Pull out enough wire 6. Secure to the anchor point. Once you have established rope to reach your anchor point. Be sure to keep a certain your anchor point, secure the tree-trunk protector or amount of tension on the wire as it can become twisted choker-chain around the object. and over-wrapped when slackened, leading to wire rope damage. To prevent losing the end, hold the hook strap while you work.
STARTING AND OPERATING 467 CAUTION! Always be certain the anchor you select will withstand the load. 7. Attach the Clevis/D-shackle and Tree Trunk Protector. Attach the shackle to the two ends of the strap or chain and through the hook loop, being careful not to over tighten (tighten and back-off 1/2 turn). NOTE: How to choose an anchor point: A secure anchor is critical to winching operations. An anchor must be strong enough to hold while winching. Natural anchors include trees, stumps and rocks.
468 STARTING AND OPERATING NOTE: Always ensure the clutch is fully engaged or disengaged. 9. Connect the remote control to the winch control box, located behind the front bumper. Be careful not to let the remote control cord dangle in front of the winch. If you choose to control the winch from inside your vehicle, always pass the remote through a window to avoid pinching the cord in the door. Always disconnect the remote control when not in use. 10. Put wire rope under tension.
STARTING AND OPERATING 469 12. Check wire rope. The wire rope should be neatly wound around the spooling drum. Improper winding can cause damage to the wire rope. 5 11. Check your anchor. Make sure all connections are secured and free of debris before continuing with the winching procedure.
470 STARTING AND OPERATING 13. In certain situations you the vehicle and never near the wire rope or snatch may decide to throw a heavy block. Your situation may have other ⴖno peopleⴖ zones. blanket or similar object over the wire rope. A heavy blanket can absorb energy should the wire rope break. Place it on the wire rope midway between the winch and the anchor point. Do this before the wire rope is put under tension. Do not approach or move the blanket once tension is applied.
STARTING AND OPERATING 471 For additional assistance, the winched vehicle can be NOTE: slowly driven while being pulled by the winch. Continue • Avoid overheating the winch motor. For extended winching, stop at reasonable intervals to allow the pulling until the vehicle is on stable ground. If you are winch motor to cool down. able to drive the vehicle, the winching operation is complete.
472 STARTING AND OPERATING section of the rope and reposition it to the opposite end of the drum, which will free up space for continued winching. 16. Secure vehicle. Once recovery of the vehicle’s is complete, be sure to secure the vehicle’s brakes and put the transmission in PARK. Release tension in the wire rope. 17. Disconnect the wire rope, and disconnect from the anchor. 18. Rewind the wire rope.
STARTING AND OPERATING 473 NOTE: How to spool under no load: Arrange the remote control lead so it cannot be caught in the winch. Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope already on the spooling drum is wound tightly and evenly layered. Tighten and straighten the layer if necessary. Keep the wire rope under light tension and spool the wire rope back and onto the winch drum in even layers. Stop frequently to tighten and straighten the layers as necessary.
474 STARTING AND OPERATING Rigging Techniques How To Change The Pulling Direction Various winching situations will require application of other winching techniques. These could range from too little distance to achieve maximum pull using straight line rigging, simply increasing pulling power, or maintaining a straight-line pulling situation. You will have to assess what technique is correct for your situation. Think ⬙safety⬙ at all times.
STARTING AND OPERATING 475 All winching operations should have a straight line from Double Line the winch to the object being pulled. This minimizes the wire rope collecting on one side of the drum affecting pulling efficiency and damaging wire rope. A snatch block, secured to a point directly in front of the vehicle will enable you to change your pulling direction while still allowing the wire rope to be at 90° to wind properly onto the spooling drum.
476 STARTING AND OPERATING vehicle’s frame/tow hook and run the wire rope through NOTE: a snatch block. Disengage the clutch and, using the • Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that snatch block, pull out enough wire to reach your anchor there is a problem with the power steering system. point. Do not attach the hook to the mounting kit.
STARTING AND OPERATING 477 CAUTION! CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New Vehicle Limited Warranty.
478 STARTING AND OPERATING MULTI-DISPLACEMENT SYSTEM (MDS) (IF EQUIPPED) — 5.7L ENGINE ONLY This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills required. NOTE: The MDS system may take some time to return to full functionality after a battery disconnect. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied.
STARTING AND OPERATING 479 NOTE: • When the parking brake is applied and the transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is applied. It does not show the degree of brake application.
480 STARTING AND OPERATING WARNING! (Continued) • Always fully apply the parking brake when leaving your vehicle or it may roll and cause damage or injury. Also, be certain to leave the transmission in PARK. Failure to do so may cause the vehicle to roll and cause damage or injury. CAUTION! If the Brake System Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
STARTING AND OPERATING 481 ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system that includes Anti-Lock Brake System (ABS), Traction Control System (TCS), Brake Assist System (BAS), Hill Start Assist (HSA), Electronic Stability Control (ESC) and Trailer Sway Control (TSC). All of the systems work together to enhance vehicle stability and control in various driving conditions, and are commonly referred to as ESC.
482 STARTING AND OPERATING Traction Control System (TCS) – If Equipped The TCS monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s), and engine power is reduced to provide enhanced acceleration and stability. A feature of the TCS functions similarly to a limited-slip differential and controls the wheel spin across a driven axle.
STARTING AND OPERATING 483 WARNING! • The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
484 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., The system will work in REVERSE and all forward gears, vehicle facing uphill is in forward gear; vehicle back- and will not activate if the vehicle is placed in ing uphill is in REVERSE gear). NEUTRAL. WARNING! There may be situations on minor hills (i.e.
STARTING AND OPERATING 485 WARNING! WARNING! (Continued) • If you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
486 STARTING AND OPERATING 3. With the engine running and the brake applied, rotate EVIC Equipped Vehicles the steering wheel 180° counterclockwise from center. HSA is a Customer Programmable Feature on a EVIC equipped vehicle. If you wish to turn off the HSA feature, 4. Press the “ESC Off” switch four times within 20 secrefer to “Electronic Vehicle Information Center (EVIC)/ onds. The “ESC Off Indicator Light” should appear and Customer Programmable Features” in “Understanding disappear four times.
STARTING AND OPERATING 487 the intended path, ESC applies the brake of the appro- this mode. This mode should be used for almost all priate wheel to assist in counteracting the oversteer or driving situations. ESC should only be turned to “Partial Off” or “ESP Off” for specific reasons as noted below. understeer condition. • Oversteer - when the vehicle is turning more than appropriate for the steering wheel position.
488 STARTING AND OPERATING ESC Partial Off This mode is entered by momentarily pressing the “ESC Off” switch. When in ⬙Partial Off⬙ mode, the TCS portion of ESC, except for the “limited slip” feature described in the TCS section, has been disabled and the ⬙ESC Off Indicator Light⬙ will be illuminated. All other stability features of ESC function normally.
STARTING AND OPERATING 489 and the “ESC Off” message will appear in the odometer. when ESC is off. To turn ESC on again, momentarily Press and release the trip odometer button located on the press the “ESC Off” switch. This will restore the normal “ESC On” mode of operation. instrument cluster to clear this message. NOTE: The “ESC OFF” message will display and the audible chime will sound when the shift lever is placed into the PARK position from any other position and then moved out of the PARK position.
490 STARTING AND OPERATING ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator Light” comes on continuously with the engine running, a malfunction has been detected in the ESC system.
STARTING AND OPERATING 491 Trailer Sway Control (TSC) – If Equipped The TSC system uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. The system may reduce engine power and apply the brake of the appropriate wheel(s) to counteract the sway of the trailer. TSC will become active automatically once an excessively swaying trailer is recognized. No driver action is required.
492 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. Tires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter ⬙P⬙ is absent from this tire size designation.
STARTING AND OPERATING 493 compact spare tires have the letter “T” or “S” molded • High flotation tire sizing is based on U.S. design into the sidewall preceding the size designation. Exstandards and it begins with the tire diameter molded ample: T145/80D18 103M. into the sidewall. Example: 31x10.5 R15 LT. Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ....blank....
494 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e.
STARTING AND OPERATING 495 Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the inboard side of the tire.
496 STARTING AND OPERATING Tire Terminology And Definitions Term B-Pillar Cold Tire Inflation Pressure Maximum Inflation Pressure Recommended Cold Tire Inflation Pressure Tire Placard Definition The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
STARTING AND OPERATING 497 Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
498 STARTING AND OPERATING To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the Tire and Loading Information placard. Loading The combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
STARTING AND OPERATING 499 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcusengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity. For example, if “XXX” and number and size of occupants.
500 STARTING AND OPERATING
STARTING AND OPERATING 501 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
502 STARTING AND OPERATING WARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recommended cold tire inflation pressure. Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side “B” Pillar or rear edge of the driver’s side door.
STARTING AND OPERATING 503 CAUTION! After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the Winter.
504 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or conditions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important. Increased tire pressure and reduced vehicle poorly.
STARTING AND OPERATING 505 Spare Tire Matching Original Equipped Tire And CAUTION! Wheel – If Equipped Your vehicle may be equivalent with a spare tire and Because of the reduced ground clearance, do not take wheel in look and function as the original equipment tire your vehicle through an automatic car wash with a and wheel found on the front or rear axle of your vehicle. compact, full size or limited-use temporary spare This spare tire may be used in the tire rotation for your installed.
506 STARTING AND OPERATING Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. This tire may look like the original equipped tire on the on your vehicle at the first opportunity. front or rear axle of your vehicle, but it is not. This spare Do not install a wheel cover or attempt to mount a tire may have limited tread life.
STARTING AND OPERATING 507 your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) first opportunity. or for longer than 30 seconds continuously without WARNING! stopping when you are stuck. Limited-use spares are for emergency use only. Installation of this limited-use spare tire affects vehicle handling.
508 STARTING AND OPERATING Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
STARTING AND OPERATING 509 Keep dismounted tires in a cool, dry place with as little It is recommended to replace the two front tires or two exposure to light as possible. Protect tires from contact rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a with oil, grease, and gasoline. wheel, make sure that the wheel’s specifications match Replacement Tires those of the original wheels.
510 STARTING AND OPERATING WARNING! WARNING! (Continued) • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death.
STARTING AND OPERATING 511 TIRE CHAINS Use “Class S” chains, or other traction aids that meet SAE Type “S” specifications. Use “Class U” chains on 2500/3500 model trucks, or other traction aids that meet SAE Type “U” specifications. NOTE: Chains must be the proper size for the vehicle as recommended by the chain manufacturer.
512 STARTING AND OPERATING CAUTION! (Continued) • Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed of the chain manufacturer if different than the speed recommended by the manufacturer. These cautions apply to all chain traction devices, including link and cable (radial) chains.
STARTING AND OPERATING 513 CAUTION! Do not use tire chains on the front wheels of any model except for 3500 DRW (Dual Rear Wheel) trucks equipped with LT235/80R17 tires. There may not be adequate clearance for the chains and you are risking structural or body damage to your vehicle. Do not use tire chains on the rear wheels of 1500 model trucks equipped with LT275/70R17, P275/60R20, or 285/45R22 tires.
514 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. The suggested rotation method is the “forward cross” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed. These effects can be reduced by timely rotation of tires.
STARTING AND OPERATING 515 Directional Tires – If Equipped Dual Rear Wheels – If Equipped For the R/T package with 22” tires & wheels, tire rotation must be performed with consideration of the tire rotation direction. The recommended rotation pattern for directional tires is shown below. 5 Tire Rotation Tire Rotation The tires used on dual wheel assemblies should be matched for wear to prevent overloading one tire in a set. To check if tires are even, lay a straight edge across all four tires.
516 STARTING AND OPERATING CAUTION! 3500 Dual Rear Tires have only one approved direction of rotation. This is to accommodate the asymmetrical design (tread pattern) of the On/Off-Road tire and the use of Outline White Letter (OWL) tires. • When replacing a flat, the spare tire may have to be remounted on the rim, or installed at a different location, to maintain the correct placement of the tire on the wheel relative to the tire/wheel position on the truck.
STARTING AND OPERATING 517 The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low-pressure warning limit for any reason, including low temperature effects and natural pressure loss through the tire. The TPMS will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.
518 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage.
STARTING AND OPERATING 519 • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a TPM sensor. The matching full size spare can be used in place of any of the four road tires. The the tire. TPMS will only monitor the pressure in the full size spare Base System when it is used in place of a road tire.
520 STARTING AND OPERATING turn off. The vehicle may need to be driven for up to 4. Using tire chains on the vehicle. 20 minutes above 15 mph (24 km/h) in order for the 5. Using wheels/tires not equipped with TPM sensors. TPMS to receive this information. Vehicles With Full Size Spare Service TPMS Warning If a system fault is detected, the TPM Telltale Light will 1. The matching full size spare wheel and tire assembly flash on and off for 75 seconds and then remain on solid.
STARTING AND OPERATING 521 Premium System – If Equipped • Four TPM sensors, The Tire Pressure Monitor System (TPMS) uses wireless • Various TPMS messages, which display in the Electechnology with wheel rim mounted electronic sensors to tronic Vehicle Information Center (EVIC), and monitor tire pressure levels. Sensors mounted to each wheel as part of the valve stem transmit tire pressure • TPM Telltale Light readings to the receiver module.
522 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings The TPM Telltale Light will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires. In addition, the EVIC will display a “LOW TIRE PRESSURE” message for a minimum of five seconds and a graphic showing the pressure values of each tire with the low tire pressure values flashing.
STARTING AND OPERATING 523 Should this occur, you should stop as soon as possible for five seconds and then display dashes (- -) in place of and inflate the tires with a low pressure condition (those the pressure value to indicate which sensor is not being flashing in the EVIC graphic) to the vehicle’s recom- received. mended cold placard pressure inflation value.
524 STARTING AND OPERATING If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the TPM Telltale Light will no longer flash, and the “SERVICE TPM SYSTEM” message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors.
STARTING AND OPERATING 525 Vehicles With Full Size Spare Tire Pressure Monitor System (TPMS) Tire Light Load Inflation Switch Description (2500 Models) – 1. The matching full size spare wheel and tire assembly If Equipped has a TPM sensor that can be monitored by the TPMS. 2. If you install the full size spare in place of a road tire that has a pressure below the low-pressure warning limit, upon the next ignition switch cycle, a chime will sound and the TPM Telltale Light will turn ON.
526 STARTING AND OPERATING The TPMS tire light load inflation switch will allow the driver to switch between the max load inflation pressure (cold) low pressure warning threshold and the light load inflation pressure (cold) low pressure warning threshold depending on the vehicle’s load condition. The Tire and Loading Information label defines the recommended front and rear cold tire inflation pressures for the vehicle when operating in the Max Load condition.
STARTING AND OPERATING 527 Tire Light Load Inflation Switch Operation – If Equipped • This vehicle may have different recommended tire pressure values between the front and rear tires as shown in both the Tire Loading Information Label and the Supplemental Tire Pressure Information Label. It is also equipped to be driven with tire pressures appropriate to either a Light Load condition or the vehicle Max Load condition.
528 STARTING AND OPERATING Tire Pressure Information label. The Supplemental Tire Pressure Information label is located on the rear face of the driver door opening. Use an accurate tire gauge to check the tire pressures when lowering all four tire pressures. The vehicle may need to be driven above 15 mph (24 km/h) to receive this updated pressure information. After all four tire pressures have been lowered to the Light Load inflation pressures, press the tire light load inflation switch.
STARTING AND OPERATING 529 To switch back to the max load inflation pressure (cold) low pressure warning threshold, press the tire light load inflation switch. It is not necessary to first fill the tires to the max load inflation pressure (cold) values to switch the TPMS system to the max load inflation pressure (cold) low pressure warning threshold.
530 STARTING AND OPERATING FUEL REQUIREMENTS 3.7L and 4.7L Engine These engines are designed to meet all emissions regulations and provide excellent fuel economy and performance when using high quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines. 5.
STARTING AND OPERATING 531 Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasolines contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The manufacturer supports the use of reformulated gasolines. Properly blended reformulated gasolines will provide excellent performance and durability for the engine and fuel system components.
532 STARTING AND OPERATING If a Non-FFV vehicle is inadvertently fueled with E-85 MMT In Gasoline fuel, the engine will have some or all of these symptoms: MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline • operate in a lean mode blended with MMT provides no performance advantage • OBD II “Malfunction Indicator Light” on beyond gasoline of the same octane number without MMT.
STARTING AND OPERATING 533 Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in unnecessary cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law.
534 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
STARTING AND OPERATING 535 5 E-85 Fuel Cap CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85.
536 STARTING AND OPERATING Ethanol Fuel (E-85) When you do switch fuel types it is recommended that: E-85 is a mixture of approximately 85% fuel ethanol and • you do not switch when the fuel gauge indicates less 15% unleaded gasoline. than 1/4 full WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smoking materials lit in or near the vehicle when removing the fuel filler tube cap (gas cap) or filling the tank.
STARTING AND OPERATING 537 • Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOPAR威 Injector Cleanup or Techron may be used. Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles FFV vehicles operated on E-85 require specially formulated engine oils.
538 STARTING AND OPERATING Replacement Parts Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol compatible parts. ADDING FUEL The fuel filler cap (gas cap) is located behind the fuel filler door, on the left side of the vehicle. Open the fuel door and remove the fuel cap by turning it counterclockwise.
STARTING AND OPERATING 539 NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door. CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunction Indicator Light (MIL)” to turn on.
540 STARTING AND OPERATING • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. This label contains the month and year of manufacture, Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR) front and rear, and Vehicle Identification Loose Fuel Filler Cap Message Number (VIN). A Month-Day-Hour (MDH) number is If the vehicle diagnostic system determines included on this label and indicates the Month, Day and that the fuel filler cap is loose, improperly Hour of manufacture.
STARTING AND OPERATING 541 Gross Axle Weight Rating (GAWR) Rim Size The GAWR is the maximum permissible load on the front This is the rim size that is appropriate for the tire size and rear axles. The load must be distributed in the cargo listed. area so that the GAWR of each axle is not exceeded.
542 STARTING AND OPERATING Loading The actual total weight and the weight of the front and rear of your vehicle at the ground can best be determined by weighing it when it is loaded and ready for operation. The entire vehicle should first be weighed on a commercial scale to insure that the GVWR has not been exceeded. The weight on the front and rear of the vehicle should then be determined separately to be sure that the load is properly distributed over the front and rear axle.
STARTING AND OPERATING 543 Common Towing Definitions Gross Combination Weight Rating (GCWR) The following trailer towing related definitions will assist The GCWR is the total permissible weight of your vehicle you in understanding the following information: and trailer when weighed in combination. Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo and tongue weight.
544 STARTING AND OPERATING Tongue Weight (TW) The tongue weight is the downward force exerted on the hitch ball by the trailer. In most cases it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle. Weight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the truck.
STARTING AND OPERATING 545 equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on vehicle and trailer configuration/loading to comply with GAWR requirements. WARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability and braking performance and could result in a collision. • Weight distributing systems may not be compatible with surge brake couplers.
546 STARTING AND OPERATING EXAMPLE — With Weight-Distributing Hitch (Correct) EXAMPLE — Improper Adjustment of Weight-Distributing Hitch (Incorrect) Fifth-Wheel Hitch The fifth-wheel hitch is a special high platform with a coupling that mounts over the rear axle of the tow vehicle in the truck bed. It connects a vehicle and fifth-wheel trailer with a coupling king pin.
STARTING AND OPERATING 547 Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects to the hitch mounted over the rear axle in the truck bed.
548 STARTING AND OPERATING Ram 1500 4x2 3.7L V-6 4–Speed Automatic Transmission 4.7L V-8 6–Speed Automatic Transmission 5.
STARTING AND OPERATING 549 Ram 1500 4x4 4.7L V-8 6–Speed Automatic Transmission 5.
550 STARTING AND OPERATING Ram 2500 & 3500 2500 Power Wagon威 5.7L HEMI威 V-8 6-Speed Automatic Transmission 6.7L Cummins威 Turbo Diesel I-6 6-Speed Manual Transmission 6.
STARTING AND OPERATING 551 NOTE: For additional trailer towing information (maximum trailer weight ratings) refer to the following website addresses: • http://www.ramtrucks.com. • http://www.ramtruck.ca (Canada). Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the GTW on the tow hitch of your vehicle.
552 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading Information Placard” in “Starting and Operating” for further information.
STARTING AND OPERATING 553 WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer.
554 STARTING AND OPERATING Towing Requirements – Tires • Do not attempt to tow a trailer with less than the full size spare tire. replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GAWR limits. Towing Requirements – Trailer Brakes • Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
STARTING AND OPERATING 555 CAUTION! WARNING! (Continued) If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. • Towing any trailer will increase your stopping distance. When towing you should allow for additional space between your vehicle and the vehicle in front of you.
556 STARTING AND OPERATING NOTE: This module has been designed and verified The user interface consists of the following: with electric trailer brakes and new electric over hydrauGAIN/ Brake Output Power Display lic systems. Some previous EOH systems may not be Shows the current GAIN setting. compatible with ITBM. This display may also be used to display diagnostic information, if needed.
STARTING AND OPERATING 557 Manual Brake Control Lever Slide the manual brake control lever to the right to activate power to the trailer’s electric brakes independent of the tow vehicle’s brakes. If the manual brake control lever is activated while the brake is also applied, the greater of the two inputs determines the power sent to the trailer brakes. If a fault is detected in the trailer wiring or the Integrated Trailer Brake Module (ITBM), the “Trailer Brake Status Indicator Light” will flash.
558 STARTING AND OPERATING Adjusting GAIN NOTE: This should only be performed in a traffic free environment at speeds of approximately 20–25 mph (30–40 km/h). 1. Make sure the trailer brakes are in good working condition, functioning normally, and properly adjusted. See your trailer dealer if necessary. 2. Hook up the trailer and make the electrical connections according to the trailer manufacturer’s instructions. 3.
STARTING AND OPERATING 559 5 6. Press the SELECT button and then press the UP or NOTE: 1500 Models Only – Light Electric and Heavy DOWN buttons until the proper Trailer Brake Type Electric will only be available due to the tow capacities of appears on the screen. the vehicle. 7. Use the GAIN adjustment (+/-) buttons to increase or decrease the GAIN setting to the desired starting point. A GAIN setting of 5 is a good starting point.
560 STARTING AND OPERATING 8. In a traffic-free environment, tow the trailer on a dry, level surface at a speed of 20–25 mph (30–40 km/h) and squeeze the manual brake control lever completely. 9. If the trailer wheels lockup (indicated by squealing tires), reduce the GAIN setting; if the trailer wheels turn freely, increase the GAIN setting. Repeat Steps 8 and 9 until the GAIN setting is at a point just below trailer wheel lockup.
STARTING AND OPERATING 561 compatible with ITBM. To determine the type of The electrical connections are all complete to the vehicle brakes on your trailer and the availability of control- but you must mate the harness to a trailer connector. Refer to the following illustrations. lers, check with your trailer manufacturer or dealer. • Removal of the ITBM will cause errors and it may cause damage to the electrical system and electronic modules of the vehicle.
562 STARTING AND OPERATING WARNING! Any work done to the vehicle’s electrical system or wiring should be performed by a qualified automotive technician. If done improperly it may cause damage to the electrical system wiring and could result in serious or fatal injury. Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic.
STARTING AND OPERATING 563 NOTE: Using “TOW/HAUL” mode or a lower gear Electronic Speed Control – If Equipped range while operating the vehicle under heavy operating − Do not use in hilly terrain or with heavy loads. conditions will improve performance and extend transmission life by reducing excessive shifting and heat build − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until up. This action will also provide better engine braking.
564 STARTING AND OPERATING − Air Conditioning Turn off temporarily. CAUTION! Using this vehicle for snowplow applications can cause damage to the vehicle. SNOWPLOW 1500 Models Only NOTE: Do not use this model vehicle for snowplow applications. WARNING! Snowplows and other aftermarket equipment should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the front end structure.
STARTING AND OPERATING 565 Builders Guide. See your authorized dealer, installer or Before Plowing snowplow manufacturer for this information. There are • Check the hydraulic system for leaks and proper fluid unique electrical systems that must be connected to level. properly assure operator safety and prevent overloading • Check the mounting bolts and nuts for proper tightvehicle systems. ness.
566 STARTING AND OPERATING 2. The total GVWR or the Front GAWR or the Rear if necessary at the beginning and end of the snowplow GAWR should never be exceeded. season. This will help prevent uneven tire wear. 3. Cargo capacity will be reduced by the addition of The blade should be lowered whenever the vehicle is options or passengers, etc. parked.
STARTING AND OPERATING 567 Operating Tips Under ideal snow plowing conditions, 20 mph (32 km/h) should be maximum operating speed. The operator should be familiar with the area and surface to be cleaned. Reduce speed and use extreme caution when plowing unfamiliar areas or under poor visibility. General Maintenance Snowplows should be maintained in accordance with the plow manufacturer’s instructions. Keep all snowplow electrical connections and battery terminals clean and free of corrosion.
568 STARTING AND OPERATING • Vehicles with automatic transmissions should use 4L • Do not shift the transmission unless the engine has range when plowing deep or heavy snow for extended returned to idle and wheels have stopped. Make a periods of time to avoid transmission overheating. practice of stepping on the brake pedal before shifting the transmission. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.
STARTING AND OPERATING 569 6. Install a suitable clamping device, designed for towRecreational Towing – Two-Wheel Drive Models DO NOT flat tow this vehicle. Damage to the drivetrain ing, to secure the front wheels in the straight position. will result. Recreational towing (for two-wheel drive models) is allowed ONLY if the rear wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1.
570 STARTING AND OPERATING into PARK for recreational towing. Refer to the following for the proper transfer case NEUTRAL (N) shifting procedure for your vehicle. CAUTION! • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • Tow only in the forward direction. Towing this vehicle backwards can cause severe damage to the transfer case.
STARTING AND OPERATING 571 Shifting Into NEUTRAL (N) – Manual Shift Transfer Case (If Equipped) Use the following procedure to prepare your vehicle for recreational towing. WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL (N) position without first fully engaging the parking brake.
572 STARTING AND OPERATING 9. Repeat steps 7 and 8 with transmission in DRIVE. 10. Turn OFF the engine. 11. Firmly apply the parking brake. 12. Shift the transmission into PARK. CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL (N) and the engine running. With the transfer case in NEUTRAL (N) ensure that the engine is OFF prior to shifting the transmission into PARK. 13. Remove the key fob from the ignition switch.
STARTING AND OPERATING 573 7. Shift the transmission into PARK. 8. Release the brake pedal. 9. Disconnect vehicle from the tow vehicle. 10. Start the engine. 11. Press and hold the brake pedal. 12. Release the parking brake. 13. Shift the transmission into gear, release the brake pedal, and check that the vehicle operates normally.
574 STARTING AND OPERATING CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL before recreational towing to prevent damage to internal parts. 6. Press and hold the transfer case NEUTRAL button (located by the selector switch). The NEUTRAL indicator light will blink while the shift is in progress. The light will stop blinking (stay on solid) when the shift to NEUTRAL is complete. 7. After the shift is completed and the NEUTRAL light 1.
STARTING AND OPERATING 575 CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL and the engine running. With the transfer case in NEUTRAL, ensure that the engine is OFF prior to shifting the transmission into PARK. 15. Remove the key fob from the ignition switch. 16. Attach the vehicle to the tow vehicle using a suitable tow bar. 17. Release the parking brake.
576 STARTING AND OPERATING 8. After the NEUTRAL button has been released, the Shifting Out Of NEUTRAL – Electronic Shift transfer case will shift to the position indicated by the Transfer Case (If Equipped) Use the following procedure to prepare your vehicle for selector switch. normal usage: NOTE: When shifting out of transfer case NEUTRAL, 1. Bring the vehicle to a complete stop, leaving it con- turning the engine OFF may be required to avoid gear nected to the tow vehicle. clash. 2.
STARTING AND OPERATING 577 NOTE: • The ignition switch must be in the ON/RUN position • Steps 1 through 5 are requirements that must be met for a transfer case shift to take place and for the prior to pressing the transfer case NEUTRAL button position indicator lights to be operable. If the ignition and must continue to be met until the shift has been switch is not in the ON/RUN position, the shift will completed.
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flashers . . . . . . . . . . . . . . . . 581 ▫ To Stow The Flat Or Spare . . . . . . . . . . . . . . 601 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 581 䡵 Hoisting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 582 䡵 Jump-Starting Procedures . . . . . . . . . . . . . . . . 602 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . .
580 WHAT TO DO IN EMERGENCIES ▫ Center Console Shifter — If Equipped . . . . . 609 ▫ Two-Wheel Drive Models . . . . . . . . . . . . . . 612 䡵 Towing A Disabled Vehicle . . . . . . . . . . . . . . . 610 ▫ Four-Wheel Drive Vehicles . . . . . . . . . . . . . . 613 ▫ Towing Without The Ignition Key Fob . . . . .
WHAT TO DO IN EMERGENCIES 581 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the upper switch bank just below the radio. potential for overheating by taking the appropriate action. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional • On the highways — slow down.
582 WHAT TO DO IN EMERGENCIES • You can also turn the temperature control to maximum heat, the mode control to floor and the blower control to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle.
WHAT TO DO IN EMERGENCIES 583 WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. • Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack is designed to be used as a tool for changing tires only.
584 WHAT TO DO IN EMERGENCIES Remove the jack and tools by removing the wing bolt and sliding the assembly from under the seat.
WHAT TO DO IN EMERGENCIES 585 WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid acceleration or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury. Reinstalling The Jack And Tools (1500 Series) 1. Lower the jack all the way down by turning the jack turn-screw until the jack is snug. 2.
586 WHAT TO DO IN EMERGENCIES 3. Fold the flap and roll the jack tool kit into a cylindrical package (in direction of arrows) and tie to the jack using the tie straps.
WHAT TO DO IN EMERGENCIES 587 6 Jack And Tools Tied 4. Place the jack and tools in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor, and then secure to the floor pan using the wing bolt. Reinstall the plastic cover.
588 WHAT TO DO IN EMERGENCIES Removing The Spare Tire Remove the spare tire before attempting to jack up the truck. Attach the wheel wrench to the jack extension tube. Insert the tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
WHAT TO DO IN EMERGENCIES 589 NOTE: The winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and can damage the winch. Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
590 WHAT TO DO IN EMERGENCIES 4. Place the shift lever into PARK. On four-wheel drive Instructions vehicles, shift the transfer case to the 4L position. 5. Turn the ignition OFF. 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.
WHAT TO DO IN EMERGENCIES 591 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. • To assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground.
592 WHAT TO DO IN EMERGENCIES 3. Placement of the jack: • 1500 Series Trucks When changing a front wheel, place the scissors jack under the rear portion of the lower control arm as shown below. 4X4 Jacking Location Operate the jack using the jack drive tube and the wheel wrench. The tube extension may be used but is not required.
WHAT TO DO IN EMERGENCIES 593 For 4x2 and 4x4 trucks, when changing a rear wheel, Connect the jack tube extension and wheel wrench. assemble the jack drive tube to the jack and connect the CAUTION! drive tube to the extension tube. Place the jack under the axle between the wheel and the shock bracket with the Before raising the wheel off the ground, make sure drive tubes extending to the rear. that the jack will not damage surrounding truck parts and adjust the jack position as required.
594 WHAT TO DO IN EMERGENCIES • 2500/3500 Series Trucks For 2500/3500 4x2 series trucks, when changing a front wheel, place the bottle jack under the frame rail behind the wheel. Locate the jack as far forward as possible on the straight part of the frame. 4x2 Jacking Location Operate the jack using the jack drive tube and the wheel wrench. The tube extension, may be used, but is not required.
WHAT TO DO IN EMERGENCIES 595 6 4x4 Jacking Location Rear Jacking Location (All) For 4x2 and 4x4 trucks, when changing a rear wheel, Connect the jack tube extension and wheel wrench. assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle between the spring and the shock absorber with the drive tubes extending to the rear.
596 WHAT TO DO IN EMERGENCIES 5. Remove the wheel nuts and pull the wheel off. On single rear-wheel (SRW) trucks, install the spare wheel Before raising the wheel off the ground, make sure and wheel nuts with the cone shaped end of the wheel that the jack will not damage surrounding truck parts nuts toward the wheel. On 3500 dual rear-wheel models (DRW) the wheel nuts are a two-piece assembly with a and adjust the jack position as required. flat face. Lightly tighten the wheel nuts.
WHAT TO DO IN EMERGENCIES 597 WARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Always stow the jack parts and the extra tire and wheel in the places provided. Hub Caps/Wheel Covers — If Equipped The hub caps must be removed before raising the vehicle off the ground. For 2500/3500 single rear-wheel (SRW) models, use the blade on the end of the lug wrench to pry the hub cap off.
598 WHAT TO DO IN EMERGENCIES CAUTION! • Use a back-and-forth motion to remove the hub cap. Do not use a twisting motion when removing the hub cap, damage to the hub cap finish may occur. • The rear hub caps on the dual rear wheel has two pry-off notches. Make sure that the hook of the jack handle driver is located squarely in the cap notch before attempting to pull off. You must use the flat end of the lug wrench to pry off the wheel skins.
WHAT TO DO IN EMERGENCIES 599 Wheel Nuts All wheel nuts should be tightened occasionally to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated. This is especially important during the first few hundred miles/ kilometers of operation to allow the wheel nuts to become properly set. All wheel nuts should first be firmly Disc Wheels Type Nut Cone Flanged Stud Size M14 x 1.5 M14 x 1.5 seated against the wheel.
600 WHAT TO DO IN EMERGENCIES 8-Stud — Dual Rear Wheels Dual wheels are flat-mounted and center-piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the hex and the washer. Slots in the wheels will assist in properly orienting the inner and outer wheels. Align these slots when assembling the wheels for best access to the tire valve on the inner wheel.
WHAT TO DO IN EMERGENCIES 601 These dual rear wheels should be tightened as follows: 2. Retighten the wheel nuts in the same sequence to the torques listed in the table. Go through the sequence a second time to verify that specific torque has been achieved. Retighten to specifications at 100 miles (160 km) and after 500 miles (800 km). It is recommended that wheel stud nuts be kept torqued to specifications at all times. Torque wheel stud nuts to specifications at each lubrication interval.
602 WHAT TO DO IN EMERGENCIES WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immediately. HOISTING A conventional floor jack may be used at the jacking locations. Refer to the graphics that show jacking locations. However, a floor jack or frame hoist must never be used on any other parts of the underbody. CAUTION! Turn the wheel so that the valve stem is down.
WHAT TO DO IN EMERGENCIES 603 NOTE: When using a portable battery booster pack Preparations For Jump-Start follow the manufacturer’s operating instructions and The battery in your vehicle is located in the front of the engine compartment, behind the left headlight assembly. precautions. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur.
604 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be seriously injured. • Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive.
WHAT TO DO IN EMERGENCIES 605 CAUTION! WARNING! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the cable to the negative post (-) of the discharged battery. The resulting electrical spark could cause the battery to explode and could result in personal injury. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 5.
606 WHAT TO DO IN EMERGENCIES 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE If the vehicle becomes stuck in snow, sand or mud, it can cable from the positive (+) post of the booster battery. often be moved by a rocking motion. Move the shift lever 9. Disconnect the positive (+) end of the jumper cable rhythmically between DRIVE and REVERSE while apfrom the positive (+) post of the discharged vehicle. plying slight pressure to the accelerator.
WHAT TO DO IN EMERGENCIES 607 CAUTION! WARNING! • When “rocking” a stuck vehicle by moving between DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmission shifting occurring). Fast spinning tires can be dangerous.
608 WHAT TO DO IN EMERGENCIES WARNING! • Chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. • Stand clear of vehicles when pulling with tow hooks. Tow straps may become disengaged, causing serious injury. CAUTION! Tow hooks are for emergency use only to rescue a vehicle stranded off-road. Do not use tow hooks for tow truck hookup or highway towing. You could damage your vehicle.
WHAT TO DO IN EMERGENCIES 609 Center Console Shifter — If Equipped To access the override, carefully remove (using a flatbladed screwdriver) the override access cover which is located on the right of the shift lever gate. 1. Firmly set the parking brake. 2. Turn the ignition switch to the ON/RUN position without starting the engine. 3. Press and maintain firm pressure on the brake pedal. 6 Shift Lever Override Access Port 6. Move the shift lever into the NEUTRAL position. 7.
610 WHAT TO DO IN EMERGENCIES 4. Using a screwdriver or similar tool, press and hold the 5. Move the shift lever into the NEUTRAL position. override tab through the access port on the center con6. The vehicle may then be started in NEUTRAL. sole. 7. Reinstall the shift lever override access cover. TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
WHAT TO DO IN EMERGENCIES 611 Towing Condition Wheels OFF the Ground Flat Tow NONE Wheel Lift or Dolly Tow Flatbed Front Rear ALL 2WD Models 4WD Models If transmission is operable: • Transmission in NEUTRAL • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance OK BEST METHOD Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equipment manufacturer’s instructions.
612 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat bed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. Towing Without The Ignition Key Fob Special care must be taken when the vehicle is towed with the ignition in the LOCK/OFF position. The only approved method of towing without the ignition key is with a flatbed truck.
WHAT TO DO IN EMERGENCIES 613 If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), tow with the rear wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed, or with the front wheels raised and the rear wheels on a towing dolly, or (when using a suitable steering wheel stabilizer to hold the front wheels in the straight position) with the rear wheels raised and the front wheels on the ground.
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.7L . . . . . . . . . . . . . 618 䡵 Maintenance Procedures . . . . . . . . . . . . . . . . . 624 䡵 Engine Compartment — 4.7L . . . . . . . . . . . . . 619 ▫ Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 625 䡵 Engine Compartment — 5.7L . . . . . . . . . . . . . 620 ▫ Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . 627 䡵 Onboard Diagnostic System (OBD II) . . . . . . . 621 ▫ Engine Air Cleaner Filter . . . . . . . . .
616 MAINTAINING YOUR VEHICLE ▫ Windshield Wiper Blades . . . . . . . . . . . . . . . 632 䡵 Vehicle Storage . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ Adding Washer Fluid . . . . . . . . . . . . . . . . . 632 䡵 Replacement Bulbs . . . . . . . . . . . . . . . . . . . . 662 ▫ Exhaust System . . . . . . . . . . . . . . . . . . . . . 633 䡵 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . 663 ▫ Cooling System . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 617 ▫ Side Marker Lamps (Dual Rear Wheels) — If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 671 䡵 Fluid Capacities . . . . . . . . . . . . . . . . . . . . . . 672 䡵 Fluids, Lubricants And Genuine Parts . . . . . . . 674 ▫ Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674 ▫ Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . .
618 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.
MAINTAINING YOUR VEHICLE 619 ENGINE COMPARTMENT — 4.
620 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.
MAINTAINING YOUR VEHICLE 621 ONBOARD DIAGNOSTIC SYSTEM (OBD II) Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
622 MAINTAINING YOUR VEHICLE the SELECT button to turn off the message. If the Normally, the OBD II system will be ready. The OBD II problem continues, the message will appear the next time system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replacethe vehicle is started. ment. If the OBD II system should be determined not A loose, improperly installed, or damaged fuel filler cap ready for the I/M test, your vehicle may fail the test.
MAINTAINING YOUR VEHICLE 623 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a. The MIL will flash for about 10 seconds and then before going to the I/M station. The I/M station can fail return to being fully illuminated until you turn OFF your vehicle because the MIL is on with the engine the ignition or start the engine.
624 MAINTAINING YOUR VEHICLE DEALER SERVICE Your authorized dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner. Service Manuals are available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you.
MAINTAINING YOUR VEHICLE 625 CAUTION! (Continued) • Your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covered by the New Vehicle Limited Warranty.
626 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New Vehicle Limited Warranty.
MAINTAINING YOUR VEHICLE 627 Lubricants which do not have both the engine oil certi- Disposing Of Used Engine Oil And Oil Filters fication mark and the correct SAE viscosity grade num- Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, ber should not be used. indiscriminately discarded, can present a problem to the NOTE: For 2500/3500 trucks with a 5.7L engine operenvironment.
628 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR威 engine air WARNING! cleaner filters are a high quality filter and are recommended. The air induction system (air cleaner, hoses, etc.
MAINTAINING YOUR VEHICLE 629 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. Refer to “Jump-Starting Procedures” in “What To Do In Emergencies” for further information. • Battery gas is flammable and explosive.
630 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in your air conditioning system as the chemicals can damage your air conditioning components.
MAINTAINING YOUR VEHICLE 631 tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR威 Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit. After lubricating, excess oil and grease should be removed.
632 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Adding Washer Fluid The fluid reservoir is located under the hood and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze).
MAINTAINING YOUR VEHICLE 633 WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. After the engine has warmed up, operate the defroster for a few minutes to reduce the possibility of smearing or freezing the fluid on the cold windshield.
634 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, refer to “Safety Tips/Exhaust Gas” in “Things To Know Before Starting Your Vehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn.
MAINTAINING YOUR VEHICLE 635 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter damverter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage. motion.
636 MAINTAINING YOUR VEHICLE Cooling System WARNING! You or others can be badly burned by hot coolant or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Check the coolant recovery bottle tubing for brittle rubber, cracking, tears, cuts and tightness of the connection at the bottle and radiator. Inspect the entire system for leaks.
MAINTAINING YOUR VEHICLE 637 Refer to the “Maintenance Schedule” for the proper maintenance intervals. Selection Of Coolant Use only the manufacturer’s recommended engine coolant (antifreeze). Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
638 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to mainOrganic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing according to the temperatures occurring in the area where (antifreeze). When adding engine coolant (antifreeze): the vehicle is operated.
MAINTAINING YOUR VEHICLE 639 WARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle.
640 MAINTAINING YOUR VEHICLE To check the coolant level: 1. Open the coolant reservoir. 3. Check the coolant level on the dipstick. The radiator normally remains completely full, so there is 2. Lift and remove the plastic dipstick from the reservoir no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing enneck. gine coolant (antifreeze).
MAINTAINING YOUR VEHICLE 641 of this. As long as the engine operating temperature is • Do not overfill the coolant recovery bottle. satisfactory, the coolant bottle need only be checked once • Check engine coolant (antifreeze) freeze point in the a month. radiator and in the coolant recovery bottle.
642 MAINTAINING YOUR VEHICLE • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install ONLY the correct type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) performance, poor gas mileage, and increased emissions.
MAINTAINING YOUR VEHICLE 643 With disc brakes the fluid level can be expected to fall as the brake linings wear. However, an unexpected drop in fluid level may be caused by a leak and a system check should be conducted. Use only the manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. WARNING! • Use only manufacturer’s recommended brake fluid.
644 MAINTAINING YOUR VEHICLE WARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. For 1500 Model axles, the fluid level should be even with the bottom of the fill hole (within 1/4 in (6.4 mm) of edge of hole) for the FDU215 HD front axle and C235FE rear axle. For all 2500/3500 Model axles, the fluid level should be 1/4 in ± 1/4 in (6.4 mm ± 6.
MAINTAINING YOUR VEHICLE 645 NOTE: The presence of water in the gear lubricant will result in corrosion and possible failure of differential components. Operation of the vehicle in water, as may be encountered in some off-highway types of service, will require draining and refilling the axle to avoid damage. Limited-Slip Differentials 1500 Model rear axles equipped with a Limited Slip Differential require that 5 oz. (148 ml) MOPAR威 Limited Slip Additive or equivalent be added to the gear lubricant.
646 MAINTAINING YOUR VEHICLE Automatic Transmission Selection Of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
MAINTAINING YOUR VEHICLE 647 Fluid Level Check The fluid level should be checked when the engine is fully warmed up and the fluid in the transmission is at normal operating temperature. Operation of the transmission with an improper fluid level will greatly reduce the life of the transmission and of the fluid. Check the fluid level whenever the vehicle is serviced. 3. Fully apply the parking brake and press the brake pedal. 4.
648 MAINTAINING YOUR VEHICLE between the two “COLD” (lower) holes on the dipstick with the fluid at approximately 70°F (21°C) (room temperature). If the fluid level is correctly established at room temperature, it should be between the “HOT” (upper) reference holes when the transmission reaches 180°F (82°C). Remember it is best to check the level at the normal operating temperature.
MAINTAINING YOUR VEHICLE 649 trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme hot or cold weather and other extreme conditions will have an adverse affect on paint, metal trim, and underbody protection. • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants.
650 MAINTAINING YOUR VEHICLE • Avoid using abrasive compounds and power buffing • It is important that the drain holes in the lower edges that may diminish the gloss or thin out the paint of the doors, rocker panels and trunk be kept clear and finish. open. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals.
MAINTAINING YOUR VEHICLE 651 • Use MOPAR威 Touch Up Paint or equivalent on scratches as soon as possible. Your authorized dealer has touch up paint to match the color of your vehicle. Wheel And Wheel Trim Care • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. CAUTION! Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner.
652 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR威 Total Clean or equivalent, or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • For grease stains, apply MOPAR威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • Do not use any harsh solvents or any other form of protectants on Stain Repel products.
MAINTAINING YOUR VEHICLE 653 cleaner. Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rearview mirror, Plastic is not as scratch resistant as glass and therefore spray cleaner on the towel or rag that you are using. Do different lens cleaning procedures must be followed. not spray cleaner directly on the mirror.
654 MAINTAINING YOUR VEHICLE Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. rinse all loose dirt from your truck bed and clean your truck at least twice per year using the MOPAR威 Spray-On Bedliner Conditioner available at your local authorized dealer. If the belts need cleaning, use a mild soap solution or To Help Maintain The Appearance Of Your Spray-On lukewarm water.
MAINTAINING YOUR VEHICLE 655 WARNING! Do not use silicon-based protection products to clean your bedliner. Silicon-based products can become slippery and may result in personal injury. Spray-On Bedliners are chemically-resistant to many different types of chemicals (including gasoline, oil, hydraulic fluids) for short periods of time. If a spill occurs on your Spray-On Bedliner, rinse the truck out as soon as possible to avoid permanent damage.
656 MAINTAINING YOUR VEHICLE FUSES Totally Integrated Power Module The Totally Integrated Power Module is located in the engine compartment near the battery. This center contains cartridge fuses and mini fuses. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
MAINTAINING YOUR VEHICLE 657 Cavity Cartridge Fuse J03 30 Amp Pink J04 J05 J06 25 Amp Natural 25 Amp Natural 40 Amp Green J07 30 Amp Pink J08 40 Amp Green 30 Amp Pink J10 Mini Fuse Description Diesel Powertrain Control Module – If Equipped Driver Door Node Passenger Door Node Antilock Brakes Pump/Stability Control System Antilock Brakes Valve/Stability Control System Power Seat Sway Bar Module – If Equipped Cavity Cartridge Fuse J11 30 Amp Pink J12 30 Amp Pink J13 60 Amp Yellow J14 20 Amp Blue J15
658 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse J20 30 Amp Pink J21 20 Amp Blue J22 25 Amp Natural M1 M5 M6 M7 Mini Fuse Description Front Wiper Ground/ Low/High Washer Control Sunroof Module 15 Amp Blue 25 Amp Natural 20 Amp Yellow 20 Amp Yellow Cavity Cartridge Fuse M8 M9 M10 Mini Fuse 20 Amp Yellow 20 Amp Yellow 15 Amp Blue Stop Switch Lamp 115V AC Inverter M11 Power Outlet (Instrument Panel or Front Console)/Rain Snsr Power Outlet (Rear Console or Center Seat) M12 10 Amp Red 30 Amp Green
MAINTAINING YOUR VEHICLE 659 Cavity Cartridge Fuse M13 M14 M15 M16 Mini Fuse 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 10 Amp Red Description Main #2 Instrument Cluster/Wireless Control Module/ITM/ Siren/Multifunction Switch (Steering Column Module) Back Up Camera (Domestic Only) Power Seat Module(s)/Audio Telematics/Daytime Running Lights Relay/Instrument Cluster/Transfer Case Module Airbag Module Cavity Cartridge Fuse M18 M19 M20 M21 M22 M23 M25 Mini Fuse 15 Amp Blue 25 Amp Natural 15 Amp Blue
660 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse M26 M27 M28 M29 M30 M31 M32 M33 Mini Fuse 10 Amp Red 10 Amp Red 15 Amp Blue 10 Amp Red 15 Amp Blue 20 Amp Yellow 10 Amp Red 10 Amp Red Description Driver’s Door Switch Cavity Cartridge Fuse M34 Mini Fuse 10 Amp Red Ignition Switch Powertrain Control Module Tire Pressure Monitor M35 M36 J1962 Diag Connector Back-Up Lamps 15 Amp Blue 20 Amp Yellow M37 10 Amp Red M38 25 Amp Natural Airbag Module Powertrain Control Module Description Park Assist
MAINTAINING YOUR VEHICLE 661 CAUTION! • When installing the totally integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the totally integrated power module and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating.
662 MAINTAINING YOUR VEHICLE NOTE: • When reinstalling the IOD fuse push firmly until fully seated; the gauges in the instrument cluster will do a full sweep when the ignition switch is turned to the RUN position. This is a normal condition. NOTE: For lighted switches, see your authorized dealer for replacement instructions. All of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. LIGHT BULBS – Exterior Bulb No. Dual Headlamp . . . . . . . . . . . . . . . . . . . . . .
MAINTAINING YOUR VEHICLE 663 BULB REPLACEMENT Dual Or Quad Headlamp/Front Park And Turn Signal — If Equipped 1. Open the hood. 2. Disconnect and isolate the negative battery cable. 3. Remove the four plastic push-in fasteners that secure the upper radiator seal to the grille support and both fender ledges. 4. Remove the two plastic push-in rivets that secure the upper radiator seal to the radiator. 7.
664 MAINTAINING YOUR VEHICLE 8. Reach through the access hole of the wheel house 10. Disconnect the wiring harness connectors from the splash shield and lift the slide lock upward far enough to bulb socket. disengage it from the lock post on the back of the front 11. Replace bulb(s) as necessary. lamp unit housing. CAUTION! • Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
MAINTAINING YOUR VEHICLE 665 Fog Lamps Rear Tail/Stop, Turn Signal And Backup Lamps 1. Reach under and behind the front bumper to access 1. Remove the two screws that pass through the bed the back of the front fog lamp housing. sheetmetal. 2. Disconnect the fog lamp wiring harness connector from the fog lamp bulb. 3. Rotate the bulb counterclockwise 1⁄4 turn to unlock the bulb from the housing. 4. Pull the bulb straight out from the housing.
666 MAINTAINING YOUR VEHICLE 2. Pull the outboard side of the lamp rearward far 3. Disconnect the wiring harness connectors from the enough to unsnap the two receptacles on the outboard bulb socket. side of the lamp housing from the two plastic snap post 4. Rotate the bulb socket counterclockwise 1/4 turn to retainers in the outer box side panel. unlock it from the housing. 5. Pull the bulb straight out of the socket.
MAINTAINING YOUR VEHICLE 667 Center High-Mounted Stoplamp (CHMSL) With Cargo Lamp 1. Remove the two screws holding the housing/lens to the body as shown. 3. Turn the desired bulb socket 1⁄4 turn and remove the socket and bulb from housing. 2. Separate the connector holding the housing and wiring harness to the body.
668 MAINTAINING YOUR VEHICLE 4. Pull the desired bulb straight from the socket. CAUTION! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High-Mounted Stop Lamp 5. Reverse the procedure for installation of bulbs and housing.
MAINTAINING YOUR VEHICLE 669 Cab Top Clearance Lamps — If Equipped 1. Remove the two screws from the top of the lamp. 2. Rotate the socket 1⁄4 turn and pull it from the lamp assembly.
670 MAINTAINING YOUR VEHICLE 3. Pull the bulb straight from it’s socket and replace. 2. Turn the socket 1⁄4 turn counterclockwise to access the Rear Lamp Bar ID Marker (Dual Rear Wheels) — If bulb. Equipped 3. Pull the bulb straight out from the socket. 1. Loosen the two screws and the housing to gain access 4. Reverse the procedure for installation of the bulbs and to the bulb sockets. housing.
MAINTAINING YOUR VEHICLE 671 Side Marker Lamps (Dual Rear Wheels) — If Equipped 1. Push rearward on the side marker lamp assembly. 2. Pull the entire assembly from the fender. 3. Turn the socket 1⁄4 turn counterclockwise and remove from assembly to access the bulb. 4. Pull the bulb straight out from socket. 5. Reverse the procedure for installation of the bulbs and housing.
672 MAINTAINING YOUR VEHICLE FLUID CAPACITIES Fuel (Approximate) 1500 Regular Cab Shortbed/Crew Quad Cab Models 1500 Regular Cab Longbed/Crew Quad Cab Models (Optional) 2500/3500 Shortbed Models 2500/3500 Longbed Models Engine Oil with Filter 3.7L Engine (SAE 5W-20, API Certified) 4.7L Engine (SAE 5W-20, API Certified) 5.7L Engine (SAE 5W-20, API Certified) 5.7L Engine (SAE 5W-30, API Certified). For 2500/ 3500 trucks operating under a gross combined weight rating greater than 14,000 lbs (6 350 kg). U.S.
MAINTAINING YOUR VEHICLE 673 Cooling System 3.7L Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) 4.7L Engine (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) 5.7L Engine — 1500 Models (MOPAR威 Antifreeze/ Coolant 5 Year/100,000 Mile Formula or equivalent) 5.7L Engine — 2500/3500 Models (MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent) 5.
674 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. Engine Oil – 5.
MAINTAINING YOUR VEHICLE 675 Component Spark Plugs – 4.7L Engine Spark Plugs – 5.7L Engine Fuel Selection – 3.7L and 4.7L Engines Fuel Selection – 5.7L Engine Fluid, Lubricant, or Genuine Part Upper Bank — FR8TE2 (Gap 0.039 in [.99 mm]) Lower Bank — FR8T1332 (Gap 0.051 in [1.30 mm]) LZFR5C–11 (Gap 0.043 in [1.
676 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission - Gasoline Engines Only Transfer Case Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. MOPAR威 ATF+4威 Automatic Transmission Fluid or equivalent licensed ATF+4威 product. Transfer Case – BW44–44 Only MOPAR威 BW44–44 Transfer Case Fluid or equivalent. Front Axle – 1500 Four-Wheel Drive GL-5 SAE 75W-90 (MS-9763) or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 678 ▫ Required Maintenance Intervals . . . . . . . . . .
M A I N T E N A N C E 678 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent maintenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done S anytime a malfunction is suspected.
MAINTENANCE SCHEDULES 679 M NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated.
M A I N T E N A N C E 680 MAINTENANCE SCHEDULES Once A Month • Check tire pressure and look for unusual wear or damage. Failure to perform the required maintenance items may result in damage to the vehicle. • Inspect the battery and clean and tighten the terminals as required. Required Maintenance Intervals • Check the fluid levels of the coolant reservoir, brake NOTE: ** Vehicles built with the 4.7L engine are equipped with sixteen spark plugs.
MAINTENANCE SCHEDULES 681 M 8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only).
M 682 MAINTENANCE SCHEDULES A I 24,000 Miles (39,000 km) or N T 18 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 24,000 miles (39 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 683 M 40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule 48,000 Miles (78,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only).
M 684 MAINTENANCE SCHEDULES A I 56,000 Miles (91,000 km) or N T 42 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 56,000 miles (91 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only).
MAINTENANCE SCHEDULES 685 M 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). Replace the engine air cleaner filter. Replace the ignition cables (3.7L Engine). Replace the spark plugs (3.7L and 5.7L Engines). Lube the front drive shaft fitting (2500/3500 (4x4) models only).
M 686 MAINTENANCE SCHEDULES A I 72,000 Miles (117,000 km) or N T 54 Months Maintenance E Service Schedule N ❏ Change the engine oil and engine oil A filter. N ❏ Rotate the tires, rotate at the first sign of C irregular wear, even if it occurs before E S C H E D U L E S 8 72,000 miles (117 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only). ❏ Inspect the CV joints. ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 687 M 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only).
M 688 MAINTENANCE SCHEDULES A I 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule N ❏ Change the engine oil and engine oil filter. T ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). E ❏ Replace the engine air cleaner filter. N ❏ Replace the ignition cables (4.7L Engine). A ❏ Replace the top row and side row of spark plugs (4.7L Engine).** N ❏ Replace the spark plugs (3.7L and 5.7L Engines).
MAINTENANCE SCHEDULES 689 M 104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only). ❏ Flush and replace the engine coolant at 104,000 miles (169 000 km) or 60 months whichever comes first.
M 690 MAINTENANCE SCHEDULES A I 120,000 Miles (195,000 km) or 90 Months Maintenance Service N T Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). A N ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only). C ❏ Inspect the CV joints. E ❏ Inspect exhaust system.
MAINTENANCE SCHEDULES 691 M 128,000 Miles (208,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ Replace the engine air cleaner filter. ❏ Replace the ignition cables (3.7L Engine). ❏ Replace the spark plugs (3.7L and 5.7L Engines). ❏ Lube the front drive shaft fitting (2500/3500 (4x4) models only).
M 692 MAINTENANCE SCHEDULES A I 144,000 Miles (234,000 km) or 108 Months Maintenance Service N T Schedule E ❏ Change the engine oil and engine oil filter. N ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). A N ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the C engine air cleaner filter; replace if necessary. E ❏ Replace the top row of spark plugs (4.7L Engine).
MAINTENANCE SCHEDULES 693 M WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This could cause an accident.
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For Your Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697 ▫ Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . . 699 ▫ Prepare For The Appointment . . . . . . . . . . . 697 ▫ Service Contract . . . . . . . . . . . . . . . . . . . . . 699 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . 697 䡵 Warranty Information . . . . . . . . . . . . . . . . . .
696 IF YOU NEED CONSUMER ASSISTANCE 䡵 Department Of Transportation Uniform Tire Quality Grades . . . . . . . . . . . . . . . . . . . . . . . . 703 ▫ Treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 703 ▫ Traction Grades . . . . . . . . . . . . . . . . . . . . . 703 ▫ Temperature Grades . . . . . . . . . . . . . . . . . .
IF YOU NEED CONSUMER ASSISTANCE 697 the service advisor and list the items in order of priority. At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the for an appointment. right papers with you. Take your warranty folder. All work to be performed may not be covered by the IF YOU NEED ASSISTANCE warranty.
698 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 Auburn Hills, MI 48321–8004 solved with this process. Phone: (866) 726–4636 • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- Chrysler Canada Inc. Customer Center P.O. Box 1621 ship. They want to know if you need assistance.
IF YOU NEED CONSUMER ASSISTANCE 699 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in the United States, can communicate with the manufacturer by dialing 1–800–380–CHRY.
700 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
IF YOU NEED CONSUMER ASSISTANCE 701 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. In Canada If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately.
702 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC vemaintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles.
IF YOU NEED CONSUMER ASSISTANCE 703 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle. significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
704 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
INDEX 10
706 INDEX Adding Engine Coolant (Antifreeze) . . . . . . . . . . 637 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 538 Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . 171 Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 628 Air Conditioner Maintenance . . . . . . . . . . . . . . . 630 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . 356 Air Conditioning Controls . . . . . . . . . . . . . . . . . 356 Air Conditioning Refrigerant . . . . . . . . . . .
INDEX 707 Body Builders Guide . . . . . . . . . . . . . . . . . . . . . . . 6 Body Mechanism Lubrication . . . . . . . . . . . . . . . 631 Brake Assist System . . . . . . . . . . . . . . . . . . . . . . 482 Brake Control System, Electronic . . . . . . . . . . . . . 481 Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 642,676 Brake System . . . . . . . . . . . . . . . . . . . . . . . . 480,642 Anti-Lock (ABS) . . . . . . . . . . . . . . . . . . . . . 481 Fluid Check . . . . . . . . . . . . . .
708 INDEX Camper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 Capacities, Fluid . . . . . . . . . . . . . . . . . . . . . . . . 672 Caps, Filler Oil (Engine) . . . . . . . . . . . . . . . . . . . . . . . . 626 Power Steering . . . . . . . . . . . . . . . . . . . . . . 477 Radiator (Coolant Pressure) . . . . . . . . . . . . . 638 Car Washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649 Carbon Monoxide Warning . . . . . . . . . . . . . . . 85,534 Cargo Light . . . . . . . .
INDEX 709 Dealer Service . . . . . . . . . . . . . . . . . . . . . . . . . . 624 Defroster, Rear Window . . . . . . . . . . . . . . . . . . . 220 Defroster, Windshield . . . . . . . . . . . . . . . . 87,359,365 Delay (Intermittent) Wipers . . . . . . . . . . . . . . . . . 168 Differential, Limited-Slip . . . . . . . . . . . . . . . . . . 450 Dipsticks Power Steering . . . . . . . . . . . . . . . . . . . . . . 477 Disabled Vehicle Towing . . . . . . . . . . . . . . . . . . .
710 INDEX Dual Rear Wheels . . . . . . . . . . . . . . . . . . . . . 515,600 E-85 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534 Electric Rear Window Defrost . . . . . . . . . . . . . . . 220 Electrical Power Outlets . . . . . . . . . . . . . . . . . . . 202 Electronic Brake Control System . . . . . . . . . . . . . 481 Anti-Lock Brake System . . . . . . . . . . . . . . . . 481 Brake Assist System . . . . . . . . . . . . . . . . . . . 482 Electronic Stability Program . . . . . . . . . .
INDEX 711 Overheating . . . . . . . . . . . . . . . . . . . . . . . . 581 Temperature Gauge . . . . . . . . . . . . . . . . . . . 250 Enhanced Accident Response Feature . . . . . . . . . . 66 Entry System, Illuminated . . . . . . . . . . . . . . . . . . 20 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 Event Data Recorder . . . . . . . . . . . . . . . . . . . . . . 69 Exhaust Gas Caution . . . . . . . . . . . . . . . . . . . 85,534 Exhaust System . . . . . . . . . . . . . . . . .
712 INDEX Freeing A Stuck Vehicle . . . . . . . . . . . . . . . . . . . 606 Front Axle (Differential) . . . . . . . . . . . . . . . . . . . 644 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 Adding . . . . . . . . . . . . . . . . . . . . . . . . . . . 538 Conserving . . . . . . . . . . . . . . . . . . . . . . 276,277 Ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 Filler Cap (Gas Cap) . . . . . . . . . . . . . . . . . . 540 Gauge . . . . . . . . . . . . . . . .
INDEX 713 Guide, Body Builders . . . . . . . . . . . . . . . . . . . . . . 6 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 Heater, Engine Block . . . . . . . . . . . . . . . . . . . . . 377 High Beam/Low Beam Select (Dimmer) Switch . . 167 Hands-Free Phone (Uconnect™) . . . . . . . . . . . . . 103 Hitches Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . 547 Hazard Hoisting . . . . . . . . . . . . .
714 INDEX Instrument Panel and Controls . . . . . . . . . . . . . . 245 Instrument Panel Lens Cleaning . . . . . . . . . . . . . 653 Integrated Power Module (Fuses) . . . . . . . . . . . . 656 Integrated Trailer Brake Controls . . . . . . . . . . . . . 555 Interior Appearance Care . . . . . . . . . . . . . . . . . . 652 Interior Lights . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Intermittent Wipers (Delay Wipers) . . . . . . . . . . . 168 Introduction . . . . . . . . . . . . . . . . . . . . . .
INDEX 715 Oil Pressure . . . . . . . . . . . . . . . . . . . . . . . . 261 Cargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Center Mounted Stop . . . . . . . . . . . . . . . . . . 667 Seat Belt Reminder . . . . . . . . . . . . . . . . . . . 267 Check Engine (Malfunction Indicator) . . . . . . 264 Security Alarm (Theft Alarm) . . . . . . . . . . . . 254 Courtesy/Reading . . . . . . . . . . . . . . . . . . . .
716 INDEX Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Power Door . . . . . . . . . . . . . . . . . . . . . . . . . 31 Automatic Dimming . . . . . . . . . . . . . . . . . . . 96 Electric Powered . . . . . . . . . . . . . . . . . . . . . . 99 Low Tire Pressure System . . . . . . . . . . . . . . . . . . 516 Heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Lower Anchors and Tether for Memory . .
INDEX 717 Navigation System (Uconnect™ gps) . . . . . . . . . . 186 New Vehicle Break-In Period . . . . . . . . . . . . . . . . 84 Identification Logo . . . . . . . . . . . . . . . . . . . 626 Materials Added to . . . . . . . . . . . . . . . . . . . 627 Pressure Gauge . . . . . . . . . . . . . . . . . . . . . . 254 Recommendation . . . . . . . . . . . . . . . . . . 626,672 Synthetic . . . . . . . . . . . . . . . . . . . . . . . . . . 627 Viscosity . . . . . . . . . . . . . . . . . . . . . . . .
718 INDEX Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 478 Passing Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Pedals, Adjustable . . . . . . . . . . . . . . . . . . . . . . . 171 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . 282 Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Pets, Transporting . . . . . . . . . . . . . . . . . . . . . . . . 84 Phone, Cellular . . . . . . . . . . . . . . . . . . . . . . . . .
INDEX 719 Reclining Rear Seats . . . . . . . . . . . . . . . . . . . . . . 148 Recorder, Event Data . . . . . . . . . . . . . . . . . . . . . . 69 Recreational Towing . . . . . . . . . . . . . . . . . . . . . . 568 Shifting into Transfer Case Neutral (N) . . 571,573 Shifting out of Transfer Case Neutral (N) . . . . . . . . . . . . . . . . . . 572,576 Reformulated Gasoline . . . . . . . . . . . . . . . . . . . . 531 Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . .
720 INDEX Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Pretensioners . . . . . . . . . . . . . . . . . . . . . . . . 53 Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Untwisting Procedure . . . . . . . . . . . . . . . . . . 49 Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137,147 Adjustment . . . . . . . . . . . . . .
INDEX 721 Sliding Rear Window Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Snow Chains (Tire Chains) . . . . . . . . . . . . . . . . . 511 Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 564 Snow Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513 Spare Tire . . . . . . . . . . . . . . . . . . . . . . . . . . 505,506 Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674 Speed Control (Cruise Control) . . . . . . . . . . . . . .
722 INDEX Tip Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 Tire and Loading Information Placard . . . . . . 497,510 Tire Identification Number (TIN) . . . . . . . . . . . . . 495 Tire Markings . . . . . . . . . . . . . . . . . . . . . . . . . . 492 Tire Safety Information . . . . . . . . . . . . . . . . . . . . 492 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88,501,703 Aging (Life of Tires) . . . . . . . . . . . . . . . . . . 508 Air Pressure . . . . . . . . . . .
INDEX 723 Traction Control . . . . . . . . . . . . . . . . . . . . . . . . . 482 Trailer Sway Control (TSC) . . . . . . . . . . . . . . . . . 491 Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 542 Cooling System Tips . . . . . . . . . . . . . . . . . . 563 Hitches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547 Minimum Requirements . . . . . . . . . . . . . . . . 552 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Trailer and Tongue Weight . . . . . . . .
724 INDEX Variance, Compass . . . . . . . . . . . . . . . . . . . . . . . 281 Wheel Nut Torque . . . . . . . . . . . . . . . . . . . . . . . 599 Vehicle Identification Number (VIN) . . . . . . . . . . . . 6 Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 460 Vehicle Loading . . . . . . . . . . . . . . . . . . . . . . 498,540 Operation . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be observed during installation. The positive power connection should be made directly to the battery and fused as close to the battery as possible.
Chrysler Group LLC 12D241-126-AC 3rd Edition Printed in U.S.A.
