Specifications

22
Î
3E8/IRQ4
Serial Port 2 I/O port address is 3E8 and the interrupt address
is IRQ4
Î
2E8/IRQ3
Serial Port 2 I/O port address is 2E8 and the interrupt address
is IRQ3
Î Parallel Port Address [378]
Use the Parallel Port Address option to select the parallel port base address.
Î
Disabled
No base address is assigned to the Parallel Port
Î
378 D
EFAULT
Parallel Port I/O port address is 378
Î
278
Parallel Port I/O port address is 278
Î
3BC
Parallel Port I/O port address is 3BC
Î Parallel Port Mode [EPP]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Î
Normal
The normal parallel port mode is the standard mode for
parallel port operation.
Î
EPP D
EFAULT
The parallel port operates in the enhanced parallel port
mode (EPP). The EPP mode supports bi-directional
communication between the system and the parallel port
device and the transmission rates between the two are
much faster than the Normal mode.
Î
ECP
The parallel port operates in the extended capabilities
port (ECP) mode. The ECP mode supports bi-directional
communication between the system and the parallel port
device and the transmission rates between the two are
much faster than the Normal mode.
Î
ECP+EPP
The parallel port operates in the extended capabilities
port (ECP) mode. The ECP mode supports bi-directional
communication between the system and the parallel port
device and the transmission rates between the two are
much faster than the Normal mode
The parallel port is also be compatible with EPP devices
described above
Î Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ selection to set the parallel port interrupt address.
Î
IRQ5
IRQ5 is assigned as the parallel port interrupt address
Î
IRQ7 D
EFAULT
IRQ7 is assigned as the parallel port interrupt address
Î Serial Port3 Address [3E8/IRQ5]
Use the Serial Port3 Address option to select the base addresses for serial port 3
Î
Disabled
No base address is assigned to serial port 3
Î
3E8/IRQ5 D
EFAULT
Serial port 3 I/O port address is 3E8