EverServ Series 6000 USERS GUIDE Copyright ParTech Inc.
PAR warrants its products to be free of manufacturing defects. Please refer to the back of the sales contract for warranty terms and conditions. This document may contain technical or typographical errors. PAR reserves the right to change the document or the product it describes at any time.
INTRODUCTION ............................................................................................................................................ 4 GLOSSARY OF TERMS 4 EQUIPMENT DESCRIPTION ........................................................................................................................ 5 POS REGISTER 5 CONNECTOR WELLS 7 PEDESTAL CONNECTOR WELLS 9 SPECIFICATIONS.............................................................................................................
INTRODUCTION This guide provides information about the EverServ System. It is presented in five parts as outlined in the table below. Introduction Register cabling diagram, sample system configurations. Equipment Description Specifications, a detailed description of each system components. Setup Connect cables to register. Turn On/Off Turning on/off EverServ register. BIOS Provides information on BIOS configurations.
EQUIPMENT DESCRIPTION POS REGISTER Item Description 1. LCD display A screen that shows programming or order information. 2. Power indicator Shows that power is present. 3. Magnetic card reader Accepts employee keycards. Provides access to functions. Not present on all registers. 4. Biometric Reader Permits access to terminal through fingerprint recognition. 5. I-Button RFID tag reader.
. Item Description Customer Display Shows the customer the order total, tax total, and any change due. It may also show preset advertisement information or messages. Not present on all registers.
CONNECTOR WELLS Item Description 1. Audio Jacks Connects to cables from speaker left, speaker right, and headphone. 2. COMM serial port 1 (RS-232-C) Connects to coin dispensers, remote customer displays, remote order displays, EFT devices, printers, and other serial devices. 3. LAN Connects to a LAN cable. 4. Printer Port Connects to the cable from a printer. A Centronics-compatible parallel port. 5. Video Option Connects to other devices like coin dispenser or printers.
2 1 14 13 12 3 11 4 5 6 10 9 8 8 7
PEDESTAL CONNECTOR WELLS Item Description 1. Power Receptacle Connects to power cable. 2. KVS Receptacle Connects to KVS cable. 3. USB 24V @ 2A Connects to powered USB devices. 4. USB 12V @ 2A Connects to powered USB devices. 5. COM5 Connects to various serial devices. 6. COM6 Connects to various serial devices. 7. USB Connects to other USB devices. 8. 12V DC @ 2A Connects to DC power cable. *The EverServ 6000 Terminal supports a +12V dc power accessory jack.
SPECIFICATIONS FEATURES Description Part Number PROCESSORS: 1.73 GHz Celeron M 2.0 GHz Core Duo 2.16 GHz Core 2 Duo F7110 F7111 F7112 MEMORY: 512 MB DDR SDRAM 1 GB DDR SDRAM 2 GB DDR SDRAM F7202 F7203 F7204 MAGNETIC STRIP READERS: Blank Cover Plate 2-Track Swipe Reader – OPOS 3-Track Swipe Reader (USB) 3-Track Swipe Reader (RS232) 3-Track Swipe Reader (PS2) F7300 F7302 F7303 F7303-01 F7303-02 PROGRAM/DATA STORAGE: 80 GB 2.
Crew Side Pedestal - Optical Finger Print Customer Side Panel (Opaque) Point of Promotion Lens (Clear) Graphics LCD w/Touch Screen Graphics LCD w/o Touch Screen F7871 F7880 F7881 F7882 F7883 CASH DRAWER PARTS: Cash drawer lock Cash drawer springs Shock dampers F1500 980000501 980000540 11
BIOS Introduction This user manual describes the AMI BIOS setup program and configuration options of the EverServ motherboard. The BIOS setup program allows users to modify the basic system configuration of the EverServ motherboard. Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2.
Exit Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. Main The Main BIOS menu appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main Î System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
Î System Time [xx:xx:xx] Î Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. Advanced Use the Advanced menu to configure the CPU and peripheral devices through the following sub-menus: WARNING: Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.
CPU Configuration Use the CPU Configuration menu to view detailed CPU specifications and configure the CPU.
IDE Configuration Use the IDE Configuration menu to change and/or set the configuration of the IDE devices installed in the system.
IDE Master, IDE Slave Use the IDE Master and IDE Slave configuration menu to view both primary and secondary IDE device details and configure the IDE devices connected to the system.
Auto-Detected Drive Parameters Î The “grayed-out” items in the left frame are IDE disk drive parameters automatically detected from the firmware of the selected IDE disk drive. The drive parameters are listed as follows: Device: Lists the device type (e.g. hard disk, CD-ROM etc.) Type: Indicates the type of devices a user can manually select Vendor: Lists the device manufacturer Size: List the storage capacity of the device.
Î Î Disabled Î Auto BIOS is prevented from using Multi-Sector Transfer on the specified channel. The data to and from the device occurs one sector at a time. DEFAULT BIOS auto detects Multi-Sector Transfer support on the drive on the specified channel. If supported the data transfer to and from the device occurs multiple sectors at a time.
of 33.3MBps Î Î UDMA3 Ultra DMA mode 3 selected with a maximum data transfer rate of 44MBps (To use this mode, it is required that an 80-conductor ATA cable is used.) Î UDMA4 Ultra DMA mode 4 selected with a maximum data transfer rate of 66.6MBps (To use this mode, it is required that an 80conductor ATA cable is used.) Î UDMA5 Ultra DMA mode 5 selected with a maximum data transfer rate of 99.9MBps (To use this mode, it is required that an 80conductor ATA cable is used.) S.M.A.R.
Super IO Configuration Use the Super IO Configuration menu to set or change the configurations for the FDD controllers, parallel ports and serial ports. BIOS Menu 6: Super IO Configuration Î Serial Port1 Address [3F8/IRQ4] Î Î Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î Î 3E8/IRQ4 Serial Port 2 I/O port address is 3E8 and the interrupt address is IRQ4 Î 2E8/IRQ3 Serial Port 2 I/O port address is 2E8 and the interrupt address is IRQ3 Parallel Port Address [378] Î Î Use the Parallel Port Address option to select the parallel port base address.
Hardware Health Configuration The Hardware Health Configuration menu shows the operating temperature, fan speeds and system voltages. BIOS Menu 7: Hardware Health Configuration The following system parameters and values are shown. The system parameters that are monitored are: System Temperatures: The following system temperatures are monitored o System Temperature 1 o System Temperature 2 o CPU Temperature Fan Speeds: The CPU cooling fan speed is monitored.
ACPI Configuration The ACPI Configuration menu configures the Advanced Configuration and Power Interface (ACPI) and Power Management (APM) options. BIOS Menu 8: ACPI Configuration Î ACPI Aware O/S [Yes] Use the ACPI Aware O/S option to enable the system to configure ACPI power saving options. ACPI can only be implemented if the system OS complies with the ACPI standard. Windows 98, Windows 2000, and Windows XP all comply with ACPI. Î Disables the ACPI support for the OS.
APM Configuration The APM Configuration menu configures the Advanced Power Management (APM) options.
Event Log Configuration Use the Event Log Configuration menu to view or delete the system event log storing POSt and run-time errors and events. BIOS Menu 9: Event Log Configuration Î View Event Log Enable the View Event Log option to view all unread event entries in a display window. Î Mark all event as read Enable the View Event Log option to mark all unread events as read. Î Clear Event Log Enable the View Event Log option to discard all events in the Event Log.
MPS Configuration Use the MPS Configuration menu to select the multi-processor table. BIOS Menu 10: MPS Configuration Î MPS Function [Enabled] Î Î Î Use the MPS Function option to enable or disable the MPS function. MPS function is enabled. Disabled Enabled DEFAULT MPS function is disabled. MPS Revision [1.4] Î Î Use the Multiprocessor Specification (MPS) for OS option to specify the MPS version to be used. MPS version 1.1 is used 1.1 1.4 DEFAULT MPS version 1.
USB Configuration Use the USB Configuration menu to read USB configuration information and configure the USB settings. BIOS Menu 11: USB Configuration Î USB Configuration Î The USB Configuration field shows the system USB configuration. The items listed are: Module Version: x.xxxxx.
Î Legacy USB Support [Enabled] The Legacy USB Support BIOS option refers to USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded on the system.
PCI/PnP Use the PCI/PnP menu to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction. BIOS Menu 12: PCI/PnP Configuration Î Clear NVRAM [No] Use the Clear NVRAM option to specify if the NVRAM (Non-Volatile RAM) is cleared when the power is turned off.
Î Î This setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the system is running Plug and Play aware operating systems. IRQ# [Available] Î Î Î Yes Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device.
Boot Use the Boot menu to configure system boot options.
Boot Settings Configuration Use the Boot Settings Configuration menu to configure advanced system boot options. BIOS Menu 14: Boot Settings Configuration Î Quick Boot [Enabled] Î Î Î Enabled DEFAULT Some POST procedures are skipped to decrease the system boot time Quiet Boot [Disabled] Î Î Î Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Use the Quiet Boot BIOS option to select the screen display when the system boots.
Î Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up. Î Off Î On Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged. DEFAULT Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots up.
Boot Device Priority Use the Boot Device Priority menu to specify the boot sequence from the available devices. Possible boot devices may include: 1st FLOPPY DRIVE HDD CD/DVD PAR NETWORK BOOT Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs.
Security Settings Use the Security Settings menu to set passwords for supervisor/user. Î Supervisor Password [Not Installed] Î User Password [Not Installed] Î Change Supervisor Password Use the Change Supervisor Password option to change the supervisor password. Î Change User Password Use the Change User Password option to change the user password. Î Clear User Password Use the Clear User Password option to clear the user password.
Chipset Use the Chipset menu to access the North Bridge and South Bridge configuration menu. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
North Bridge Configuration Use the North Bridge Configuration menu to configure the North Bridge chipset. BIOS Menu 16:NorthBridge Chipset Configuration Î Boot Graphic Adapter Priority [PEG/PCI ] The Boot Graphic Adapter Priority option selects the graphics controller the system uses as a primary boot device. Î Internal Graphics Mode Select [Enable, 8MB] Use the Internal Graphic Mode Select option to specify the amount of system memory that can be used by the Internal graphics device.
Video Function Configuration Use the Video Function Configuration menu to configure the video device connected to the system. SouthBridge Configuration Use the SouthBridge Configuration menu to configure the South Bridge chipset.
Exit Use the Exit menu to load default BIOS values, optimal failsafe values and to save configuration changes. BIOS Menu 17:Exit Î Save Changes and Exit Î Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Discard Changes and Exit Î Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.
ENERGY STAR QUALIFIED COMPUTERS OVERVIEW ♦ Depending on usage, an ENERGY STAR qualified computer will use up to 50% less energy. ♦ Your office can save up to $90 per monitor per year by enabling computer and monitor’s ENERGY STAR power management features. ♦ $1 billion annually in energy costs would be saved if every desktop and monitor in U.S. was set to sleep when not in use; while avoiding greenhouse gases comparable to emissions of 1 million cars.
APPENDIX A Separating PPC from POS 1. Loosen the (2) thumbscrews under the Panel POS (operator side) which secure the cover over the main board IO connectors – remove cover. 2. Loosen the (2) thumbscrews under the pedestal which secure the (operator side) pedestal cover – remove cover. 3. Loosen the (2) thumbscrews under the pedestal which secure the side panels of the pedestal – remove side panels. 4.
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
SAFETY ♦ Before connecting cables or devices to connector wells, please turn off the power first thus preventing potential ESD damage. ♦ The service related to human safety is not allowed because this device may have the possibility of the radio interference. ♦ As this equipment has undergone EMC registration for business purpose (“A” class), the seller and/or the buyer is asked to beware of this point and designed to be used in the area, except for home use.
PAR PHONE NUMBERS Service USA: 800.382.6200 Canada: 800.387.4963 Parts USA: 800.PAR.PART Canada: 800.387.4963 Sales Continental USA except New York: 800.448.6505 New York State Only: 800.533.6311 Outside Continental USA: 315-738-0600 Driver Support http://www.partech.com/pti_products_services/service_existing_customer.
