Assembly Instructions

ASSEMBLY INSTRUCTIONS

MODEL:FR60 - FOOT RAIL FOR 60" DRY BAR

Read this instruction carefully.Refer hardware and furniture parts list for guidance.Be sure all parts are complate,before

assembling.Place all wooden furniture part on a clean and flat soft surface to prevent scratches.Refer steps provided as

assembling guide.

PART LIST

HARDWARE LIST

ITEM

DESCRIPTION

QTY ITEM

DESCRIPTION

QTY

Bar

Brackets

2 PCS

1 PC

Bolt (1/4"*1-3/4")

Washers(Dia16mm)

6 PCS

4 PCS

STEP 1:

Drill 4pcs 3/8 inch(9-10mm)holes in premarked locations on bar.

Front Panel

Side Panel

Premark location

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL:FR60 - FOOT RAIL FOR 60" DRY BAR Read this instruction carefully.Refer hardware and furniture parts list for guidance.Be sure all parts are complate,before assembling.Place all wooden furniture part on a clean and flat soft surface to prevent scratches.Refer steps provided as assembling guide.
PAGE 2
STEP 2: Loosely fit all hardware to rail,bar and supports 2 B A 1 1 A STEP 3: A THERE ARE INDICATION MARKS INDICATE WHERE TO AFFIX THE BOLTS TO THE FOOT RALL.PLEASE DRILL THROUGH THE MARKS BEFORE AFFIX THE BOLTS TO THE FOOT RAIL. Tighten bolts on foot rail 1st then tighten bolts inside bar to secure.