Installation & Assembly

RL14000

ASSEMBLY & INSTALLATION GUIDE

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Carefully remove all parts from box.

2. Loosen knobs (D) on Harp (B).

3. Remove Harp (B) from plastic bag and slide into top of Harp holder (A).

4. Adjust Harp (B) up or down to get desired height.

5. The socket (F) cannot show under the shade (E) after the harp is adjusted correctly.

6. Put shade (E) onto the top of harp (B).

7. Carefully tighten knobs (D) on Harp (B).

8. Plug into proper electrical outlet and test ﬁxture.

9. Assembly is complete.