Installation & Assembly

1. Carefully remove all parts from the box.
2. By loosening and tightening the handle (A), you can adjust the height of fixture body (B).
3. Insert bulb (not included) into the socket.
4. Remove protective plug cover (C) from the plug.
5. Plug into a proper electrical outlet and test the fixture.
6. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Flint Pharmacy Floor Lamp
Item # RL 1704
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
DRY
B
C
Bulb
(Not included)
A

Summary of content (1 pages)