Installation & Assembly

1. Carefully remove all parts from the box.
2. Install harp (C) onto the saddle (E) and secure with handle (D).
3. Adjust harp (C) up or down to get a desired height. Considering after you put the
shade (B), the socket can not be shown if you adjust the harp properly.
4. Place shade (B) to the assembled harp (C), then secure with finial (A).
5. Insert bulb (not included) into the socket.
6. Remove protective plug cover (F) from the plug.
7. Plug into a proper electrical outlet and test the fixture.
8. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Bleeker Bedside Lamp
Item # RL 3530
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIALLY UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
DRY