User manual

Domain Name Please input the domain name of 802.1x
authentication here. This field will be grayed out
when authentication type is not ‘EAP-FAST’.
Use Client If the authentication type you use is ‘PEAP’ or
‘TTLS’, you can use the certificate stored on your
computer. If the authentication type you use is
‘TLS/Smart Card’, this box is always checked.
More.. After you clicked this button, you’ll be prompted to
select a certificate on your computer.
Allow This box is always checked and can not be modified.
unauthenticated
provision mode
Use protected If the authentication type you use is ‘EAP-FAST’
authentication you can use protected authentication credential
credential by check this box.
Remove Remove the credential you imported previously.
Import Import the authentication credential file (PAC file
format), you’ll be prompted to select a credential
file from your computer.
Protocol You can select the protocol of tunneled
authentication here. This pulldown menu is only
available when authentication type you use is
‘PEAP’ or ‘TTLS’. When you use ‘EAP-FAST’ as
authentication type, the protocol setting is always
‘Generic Token Card’ and can not be changed.
Identity Please input the identity of tunneled authentication
(of tunneled here.
authentication)