Installation guide

9
If the wireless access point you selected have SSID, please
skip this step, shown in Figure 6.
Figure 6
5. If the wireless access point uses encryption, you
have to input WEP passphrase or WPA preshared
key. Shown on Figure 7, please ask the administrator
of the wireless access point for the correct
passphrase/preshared key and enter here, then
click OK. If the value you inputted here is wrong,
you will not be able to connect to this wireless access
point. Authentication type is selected automatically,
please don’t change it.
If the wireless access point you selected does not enable
encryption and does not require authentication, please
skip this step.
Figure 7