Installation guide

8
3. Click the wireless access point or network device
you wish to connect to, then click Connect, shown
in Figure 5 below.
Figure 5
The non-encrypted access point (The Encryption field
indicate None) will connected within one minute. Please
jump to step 5 on page 9 if the access point you selected
enables encryption, otherwise proceed to next step.
4. If the wireless access point does not have SSID,
you’ll be prompted to input it here. Please ask the
administrator of the wireless access point and input
the exact SSID here, then click OK when ready. If
the SSID you provided here is wrong, you’ll not be
able to connect to this access point.