Installation guide

21
Figure 15
Access Policy: Select the policy type of your access rule:
Disable:Allow any wireless client with proper authentication
settings to connect to this access point.
Allow All: Only allow wireless clients with MAC address
listed here to connect to this access point. Reject All: Reject
wireless clients with MAC address listed here to be
connected to this access point.
MAC address: Input the MAC address of the wireless
client you you wish to allow or reject here. No colon (:) or
hyphen (-) required.
Add: Add the MAC address you inputted in MAC address
field to the list.
Delete: Please select a MAC address from the list, then click
Delete button to remove it.
Remove: Delete all MAC addresses in the list.
Apply: Save and apply changes you made.