Installation guide

16
Channel: Please select the wireless channel you wish to
use. The number of channels available here will vary
depends on the setting of Country Region Code.
Wireless Mode: Please select the wireless operating mode.
You can limit the type of wireless client to 802.11b or
802.11g only, or allow 802.11b/g, and 802.11b/g/n clients.
It’s safe to select 802.11 B/G/N mix to allow all kinds of
wireless client to connect to your computer, unless you
want to limit the type of wireless client allowed to connect
to your computer.
Use Mac Address: Click this button to use the MAC
address of the wireless card as SSID. A prefix of AP will be
added.
Security Setting: Set the security options (wireless data
encryption). Please refer to chapter 3-2 Security Settings
fordetails.
Wireless Protection: Wireless protection will prevent data
collision when there are both 802.11b and 802.11g clients.
You can select Auto to let configuration utility to decide to
use wireless protection or not. You can select ON or OFF
to force the use of wireless protection or not.
Country Region Code: Available options are 0-7, which
will affect the available wireless channels you can use,
please see below.
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)