Installation guide

11
Signal: Shows the signal strength of access point or wireless
device. Larger number means better radio strength.
Channel: Shows the channel number that access point or
wireless device uses.
Encryption: Shows the encryption method that access
point or wireless device uses. If the wireless access point
does not enable encryption, you’ll see None displayed
here.
Authentication: Shows the authentication mode that access
point or wireless device uses. If the wireless access point
does not require authentication, you’ll see Unknown
displayed here.
Network Type: Shows the type of wireless connection. If
it’s a wireless access point, Infrastructure will be displayed
here; if it’s a computer or network device, AdHoc will be
displayed here.
Note: Wireless access point (Infrastructure) is a
network device which acts as a bridge, to let
wired and wireless network devices
communicate with each other.
AdHoc is another connection type. A computer
or network device can establish a direct wireless
link with other computer or network device
directly, without the help of wireless access
point.