User manual

Wireless-N PCI adapter User Manual

Note:

 The status of WPS in the router must be enabled

 If you have configured encryption mode in your router, then when you use this WPS

function, please configure encryption mode to NONE, then it will be encrypted to

WPA2-AES mode automatically. If you don‟t want to change your encryption mode, then

when you use this function, the router will be encrypted to the mode that you have

configured

Click the “Red” button to add a WPS Profile in profile list

Figure 3-16

There are 2 methods to set a WPS encryption for a wireless network: PBC and PIN

Method1: PBC

Select “Push-Button Configuration(PBC)” in WPS Method then click next.

Figure 3-17

Click “Start PBC” and click the WPS button of your wireless router at the same time, Please

wait a moment, the connection between the adapter and the router will be established

automatically.