User manual

45
3‐2AdvancedSettings
If you want to setup advanced settings for the software access point,
select ‘Advanced’ menu. If you are unsure about these settings, keep
them untouched.
Here are the descriptions of all settings below:
Beacon Interval Please input wireless beacon time interval here.
DTIM Period Please input DTIM (Delivery Traffic Indication
Message) here.
Preamble Mode Select wireless frame preamble mode (long or
short) from dropdown menu.
Set Defaults Reset all settings back to factory default value.
Apply Save changes.
If you changed any setting here and they cause a problem in
communicating with wireless clients, click ‘Set Defaults’ to reset all
settings back to the default setting.