Operation Manual
EN-76 Original User Guide | Impulse 2.0 Pedelec Version 3
8.3.1.1 Charging the seat tube battery with charger type 1
1. Connect the power cable to the battery charger.
2. Remove the protective cap on the battery.
3. Connect the charging cable to the battery charging socket until it engages.
4. Insertthemainsplugintoapowersocket.TheLEDonthebatterychargerbrieylights
up red
, then permanently green : The charging process has started.
5. Remove the power cable from the socket after completing the charging process.
6. Remove the charging cable from the battery charging socket.
7. Replace the protective cap.
8.3.1.2 Charging the seat tube battery with charger type 1 and charging station type 1
1. Connect the power cable to the battery charger.
2. Connect the charging cable of the charger to the charging station socket.
3. Insert the battery with the discharge plug down on to the charging station.
4. Insert the mains plug of the battery charger into a power socket. The LED on the
batterychargerbrieylightsupred
, then permanently green : The charging
process has started.
5. Remove the power cable from the socket after completing the charging process.
6. Remove the battery from the charging station.
7. Remove the charging cable of the charger from the charging station socket.