Operation Manual

Original User Guide | Impulse 2.0 Pedelec Version 3 EN-73
WARNING
Keepbatterychargersawayfromsparksandres. It can explode
causingsevereburnsandres.Furtherconsequencescaninclude
malfunctionsandareducedservicelife.Makesurethereissucient
ventilation when charging.
IMPORTANT
The mains voltage must match the supply voltage of the battery
charger, otherwise there is a risk of damage to the device. The supply
voltageforthechargerisspeciedonthelabelonthebackofthe
device.
Do not charge batteries for a long period if they are already fully
charged or are not being used. Electricalstorms,voltageuctuations
and short circuits can damage the battery.
Keep the battery charger clean. If the contacts are dirty, the dirt can
burn during charging, leaving burn marks. In such cases the charger
may have to be replaced  8.4.1 Cleaning P. EN-79.
8.2 Technical data and overview
Charger type 1 and charging station for type 1 seat tube battery (Comfort/
Compact)
Battery voltage
36 V
AC input voltage
100 – 240 V
Frequency
50 – 60 Hz
Max. DC output voltage
42 V
Max. charge current
3 A
Dimensions ( L I W I H)
168 mm I 108 mm I 43 mm (battery charger) + 148 mm I
128 mm I 36 mm (charging station)
Operating temperature
-10°C to +40°C
Recommended storage
temperature
0 to 20°C
Weight
706 g (charger) + 1074 g (charging station)
Protection class
The charger and the charging station is only
intended for interior use. Keep the charger away
from rain and moisture. If water gets into the
charger there is a risk of electric shock.
Charging station
Mains connector
LED
Charging cable
Battery charger
Power cable