Operation Manual
Original User Guide | Impulse 2.0 Pedelec Version 3 EN-71
CAUTION
Batteries must not be immersed in water. This presents a risk of
explosion. Do not extinguish a burning battery with water, only the
surrounding burning material. Class D extinguishers (for use on metal
res)arebettersuitedforthis.Ifitispossibletotakethebattery
safelyoutside,smothertherewithsand.Youneedhavenoworries
that the battery beneath you could explode while you are riding in the
rain – it is protected from ingress of moisture and condensation.
IMPORTANT
Do not spray the battery with a water hose or wash it with a high-
pressure cleaner. Althoughthecomponentsaresealedo,damageto
the battery may still result. Clean the battery with a soft, damp cloth.
Do not use any cleaners which contain alcohol or solvent, or which
scour. No coarse sponges or brushes may be used either. They leave
scratches and cause the surface to become matt. Clean the battery
with a soft, damp cloth.
Do not allow dirt to dry out. It is best to clean the battery
immediately after your ride.
1. Remove the battery from the pedelec.
2. Clean the casing with a slightly damp, soft cloth.
3. If the battery terminals are dirty, clean them with a dry, soft cloth.