Operation Manual
EN-68 Original User Guide | Impulse 2.0 Pedelec Version 3
7.4.1 Inserting and locking the battery
One-key system: The same key can be used for both the
battery and bike locks (where fitted).
Seat tube battery
1. Hold the battery with the discharge
plug downwards in front of the docking
station at an angle of 80°, slightly
tilted to the left.
2. Insert the battery nibs into the
recesses provided.
3. Push the battery forwards and upwards
into the docking station until the
locking mechanism engages.
4. Turn the battery key clockwise. The
battery is now locked.
1.
Hold in front of the docking station
Battery nibs
Recesses
2.
Battery nibs into recesses
3.
Push battery into docking station
4. Locking the battery
Down tube battery
1. Hold the battery with the discharge
plug down on to the docking station.
2. Push the battery into the holder until
it engages.
3. Turn the battery key clockwise. The
battery is now locked.
IMPORTANT
Itisrecommendedthatyouremovethekeytopreventitbreakingo
and getting lost.
1.
Hold at docking station
2.
Push battery into docking station
3.
Locking the battery