Operation Manual

EN-52 Original User Guide | Impulse 2.0 Pedelec Version 3
1. In the main menu, navigate to the option "Wheel circumference" as
described under  6.8.1.2 Navigating within a menu P. EN-45.
You can choose between:
» 1,540 mm to 2,330 mm
2. Use the
/ buttons to select the option required. The selected option
is highlighted in bold.
3. Ifyouhaveconrmedthewheelcircumferencewith
, you will return
to sub-menu 2 level.
6.8.2.9 Shift sensor
Path: Device settings I Drive I Shift sensor
The shift sensor detects gear changes and interrupts the motor assist for
a fraction of a second (ms = milliseconds). This enables smoother and
quicker gear changes especially with a hub gear. The higher the value
selected, the longer the interruption to the motor assist and the more time
the gear has to change.
1. In the main menu, navigate to the option "Shift sensor" as described
under  6.8.1.2 Navigating within a menu P. EN-45.
You can choose between:
OFF 50 ms 100 ms 150 ms 200 ms 250 ms 300 ms
Short interruption
Long interruption
2. Use the / buttons to select the desired option. The selected option
is highlighted in bold.
3. Ifyouhaveconrmedwith
, you will return to sub-menu 2 level.
6.8.2.10 Climb assist
Path: Device settings I Drive I Climb assist
The power sensor in the motor registers your pedalling force as you ride.
The motor controller interprets the pedalling force signals and responds
according to the climb assist setting. The lower the set value (e.g. 1),
the more sluggish the reaction of the motor when assist is enabled. With
a high value (e.g. 7), the motor reacts very responsively to the pedal
force. When riding uphill it can be an advantage if the power sensor does
not react so sensitively, so as to provide the motor assist as evenly and
smoothly as possible.
1. In the main menu, navigate to the option "Climb assist" as described
under  6.8.1.2 Navigating within a menu P. EN-45.
You can choose between:
1 2 3 4 5 6 7
Slow comportment
Sensitive comportment
2. Use the / buttons to select the option required.
The selected option is highlighted in bold.
3. Ifyouhaveconrmedwith
, you will return to sub-menu 2 level.