Operation Manual

EN-42 Original User Guide | Impulse 2.0 Pedelec Version 3
6.4 Changing assist mode
1. You must be in the start menu to change the assist mode. Select the
assistlevelyourequirebybrieypressingthe
/
buttons.
DISPLAY ASSIST POWER CONSUMP-
TION
Assist function is working hard High
Assist is working with medium power Medium
Assist is working with low power Low
No assist Very low
2. Assist starts working as soon as you start pedalling. Assist cuts out as
soon as you stop pedalling or when you have reached a speed of 25
km/h.
Big Display:Youcanhavetherideprole(assistance
behaviour) of your pedelec changed by your DCW/RU dealer.
6.5 Enabling push assist
Push assist helps you when pushing the bike.
WARNING
Push assist may only be used when pushing the pedelec. Otherwise
you could seriously injure yourself. Push assist is not designed to
provide assistance when someone is sitting on the pedelec. On back
pedal models the pedal crank also turns.
Push assist helps you when pushing the bike (up to max. 6
km/h). This is particularly helpful when you want to push
your pedelec uphill.
1. Press and hold the
button. The push
assist is activated after three seconds.
"Push assist" appears on the display.
Keep the button pressed until you no
longer need push assist.
6.6 LCD Compact Display
Trip distance
To reset the trip distance to zero, press the
button for three seconds.
Push assist activated