Operation Manual

Original User Guide | Impulse 2.0 Pedelec Version 3 EN-33
Down tube battery: Afterswitchingon,waitveseconds
beforeyouseto.Otherwise,youwillnotbeprovidedwith
the full assist level.
Battery charge level
The battery charge level is shown in the top right of the display.
Information is displayed on a battery-shaped icon with seven segments,
telling you how full the battery is charged. The lower the battery charge
level, the fewer segments are displayed. If the battery falls below the
minimumchargelevel,theassistfunctionisalsoswitchedobythe
motor.
DISPLAY BATTERY CHARGE LEVEL
100 – 85.5%
85.5 – 71.5 %
71.5 – 57.5 %
57.5 – 42.5 %
42.5 – 28.5%
28.5 – 14.5%
5.3 Switching on the pedelec
Do not switch on the pedelec when you are riding.
Otherwise, the motor can stop and you will not be provided
with the full assist level.
1. Press the
button on the easy-reach
control for 1 second. The display
lighting comes on for about 30 seconds.
A welcome message appears in the
informationeldofthedisplay.Ifyou
have an Impulse 2.0 system with a back
pedal brake the screen shows: "Please
start pedalling " or "PEDAL". You can
congureothersettingsfromthestart
menu.
If the system does not switch on
despite pressing the
button,
press the battery button for 1
second. The pedelec will switch
on. If it still does not switch
on, check the battery  7.3.1
Display panel P. EN-66.
Battery button
Down tube battery
Seat tube battery
Press the button
Start menu