Operation Manual

EN-30 Original User Guide | Impulse 2.0 Pedelec Version 3
3.11.2 Air system
*
On some suspension forks it is possible to
alter the air pressure. To do that you will
need the assistance of your DCW/RU dealer–
orifyoufeelcondentofdoingityourself
– a suspension fork pump with a pressure
gauge and the suspension fork manufactur-
er's installation manual. The valve with cap
(e.g. marked 'AIR') is usually located on the
left hand side of the fork.
4. Before every trip
DANGER
Have damaged components (tears, cracks etc.) replaced before you
use the bike again. If not, important components may fail, causing you
tofallo.
Do not ride the pedelec if it is not in a technically satisfactory
condition. If you are not sure, have it checked out by your DCW/RU
dealer.
Inspect your pedelec before every trip, and after each time it has been
transported anywhere or has been left unattended. Use the following
checklist to help you.
3.11.1 Lockout system
Ifyoursuspensionforksarettedwitha
lockout system it is possible to lock the
suspension. There are some riding situa-
tions where that can be useful: for exam-
ple, if you are riding up a hill or if you
are standing up from the saddle when
accelerating. To switch the suspension
toxed,turntherotarycontrolonthe
right hand side of the fork to 'LOCK' (or
alternatively: $). To reactivate the sus-
pension, turn the control to the 'OPEN'
position.
LOCK/$
Suspension locked
OPEN Suspension activated
DANGER
Do not ride over rough terrain with the suspension locked. It can
damagethesuspensionforks.Abrokenforkcouldcauseyoutofallo
and seriously injure yourself.
*depending on model