Operation Manual

EN-24 Original User Guide | Impulse 2.0 Pedelec Version 3
3.8.3 Cleaning
1. Remove the pedelec battery.
2. Clean the belt with a soft, damp cloth.
IMPORTANT
When you are cleaning the belt, make sure that no water gets into the
motor. Water ingress can damage the motor.
3. Leave to dry.
3.9 Gears
The gears are operated by controls on the handlebars (gear lever, twist
grips, ...). The gear shift allows you to adjust the gear of your bicycle and
the transmission to the current situation. On a straight level stretch a
higher gear is sensible to achieve and maintain a higher speed without
having to pedal too much. As soon as you start going uphill a lower gear
isbenecial,becauseitisimportanttobeabletoclimbthehillwithlittle
eort.Selectthegearssothatyourlegsarealwaysmovingatasteady
pace.
Derailleur*
With this system the chain is lifted on to
a sprocket when changing gear. The
chain must continue moving so that the
teeth of the sprocket can engage with
the chain links easily and smoothly. For
a successful gear change you must
therefore keep pedalling forwards, never
backwards! – but at the same time ped-
alling lightly and without force.
Hub gear*
Here the change of gear takes place in-
side the rear wheel hub. Space is very
tight inside the hub, therefore it is sen-
sible to pedal lightly when changing
gear.
Derailleur
Hub gear
*depending on model