Operation Manual

EN-16 Original User Guide | Impulse 2.0 Pedelec Version 3
3.1 Attaching the pedals
1. Screw the right hand pedal (marked 'R') into the right hand pedal
crank in a clockwise direction.
2. Screw the left hand pedal (marked 'L') into the left hand pedal crank in
an anticlockwise direction.
DANGER
Make sure you screw the pedals in straight otherwise you could
damage the thread on the pedal crank – if that happens while you are
ridingthebikeyoucouldfallo.
3. Tighten both pedals towards the front wheel with a torque setting
of 40 Nm.
3. Beforeyourrstride
Make sure that your pedelec is adjusted to suit your height and is ready to
use. Familiarise yourself with the basic functions of your pedelec.
DANGER
Adjusting the pedelec to your height. If the bike is not correctly
adjusted to your height you can lose control over the bike and fall off.
Ask your DCW/RU dealer to show you the operation and features of the
pedelec and its components. Please also read the component guides.
We recommend that all assembly and adjustment work is carried out
by a DCW/RU dealer, as incorrect assembly could cause components to
become loose. If that happens while you are riding the bike you could
be severely injured or killed. If you do have to tighten something, you
will find a complete list of the required torque settings in Section
 10. Torque settings P. EN-86, which must be strictly followed.
Practise braking and riding with assistance in a safe place before
venturingintotrac.If you do not familiarise yourself with the
operation and higher speed of your pedelec you could cause a serious
accident.RideinECOmodeuntilyoufeelcondentenoughtotrythe
higher modes  6.4 Changing assist mode P. EN-42. Dismount if you
are unsure about a situation.