Operation Manual
EN-14 Original User Guide | Impulse 2.0 Pedelec Version 3
IMPORTANT
Always park your pedelec so that it cannot tip over. If the bike tips
over components can be damaged. If your bike is not equipped with a
kickstand,onecanberetrotted.PleaseaskyourDCW/RUdealer.
Do not clean the pedelec with a water hose or high pressure washer.
Although the components are sealed, you could damage the bike.
Clean the pedelec with a soft damp cloth.
DANGER
Ask your DCW/RU dealer to show you the operation and features of the
components. Please also read the component guides. We recommend
that all assembly and adjustment work is carried out by your DCW/
RU dealer, as incorrect assembly could cause components to become
loose. If that happens while you are riding the bike you could be
severely injured or killed. If you do have to tighten something, you
willndacompletelistoftherequiredtorquesettingsinSection
10. Torque settings P. EN-86, which must be strictly followed.
WARNING
Do not ride in unfavourable lighting conditions (fog, rain, dusk,
darkness) without adequate lighting V.II.I Lighting P. EN-9; it can
lead to accidents and serious injuries.
Always remove the battery before starting to work on the pedelec.
The pedelec could switch on unexpectedly and you could be seriously
injured.
CAUTION
Do not attempt to open the motor, display, battery or charger;
you could injure yourself. Furthermore, parts may be destroyed,
invalidating the warranty. If problems arise please contact your DCW/
RU dealer.