Manualshelf

Data Sheet

ManualsBrandsRAK ManualsElectronicsWisGate
12345678910
31/03/2021, 06:11RAK Hotspot Miner Datasheet | RAKwireless Documentation Center
Page 9 of 12http://localhost:8080/Product-Categories/WisGate/RAK-Hotspot-Miner-v2/Datasheet/#overview
Electrical Requirements
The RAK Hotspot Miner operates at 5V/ 3A
!
NOTE
LoRa Tx mode: The LoRa module works at the maximum transmit power state.
Burn test mode: Raspberry Pi CPU and memory are running at full capacity.
Environmental Requirements
The table below lists the operation and storage temperature requirements:
Items Specifications Specifications
Frequency Range 863~870 MHz 902~928 MHz
Peak Gain 2.8 dBi 2.3 dBi
Voltage Standard Wave Ratio
(VSWR)
≤1.5 ≤1.5
Efficiency >80% >80%
Feed Impedance 50 Ohms 50 Ohms
Working Temperature &
Humidity
T: -35~+75 ºC, H:
5~95%
T: -35~+75 ºC, H:
5~95%
Parameter Min. Typical Max
LoRa Tx mode - - 950 mA
Standby power - 550 mA -
Burn test mode - - 940 mA