Data Sheet

31/03/2021, 06:11RAK Hotspot Miner Datasheet | RAKwireless Documentation Center
Page 2 of 12http://localhost:8080/Product-Categories/WisGate/RAK-Hotspot-Miner-v2/Datasheet/#overview
Deliver may square miles of coverage from a single RAK Hotspot Miner
Based on initial testing, only about 50 to 100 RAK Hotspot Miners are needed to provide
complete coverage for an entire city
Create a new global network for billions of devices
Any IoT device can become Helium-enabled using readily available off-the-shelf
hardware components, software, and a reference design that is open source for anyone
to improve upon
Features
Computing with Raspberry Pi4 (Linux)
2GB on-board RAM
32GB SD card
Based on the LoRa Concentrator Engine: Semtech® SX1302
Built-in Heat Sink for thermal heat dissipation management
Supports 5V/ 3A power supply
IP30 housing
TX power up to 27dBm, RX sensitivity down to -139 dBm @SF12, BW 125 KHz
LoRa® Frequency band support: RU864, IN865, EU868, US915, AU915, KR920, AS923.
Includes Pi ready 'ID EE PROM', GPIO setup, and device tree can be automatically
configured from vendor information
Supports a fully open source LoRaWAN server
Specifications
Overview
The overview covers the RAK Hotspot Miner hotspot details and block diagram.
Board Overview
The outer dimension of RAK Hotspot Miner is 92 x 68.3 x 57.2 mm.