User's Manual
Table Of Contents
- 1.0 PREFACE
- 2.0 INTRODUCTION
- 3.0 USING BCADMIN™
- _
- 3.1 SCREEN LAYOUT
- 3.2 ANATOMY OF A CONNECTION LINE
- 3.3 CONFIGURING INDIVIDUAL BREADCRUMBS
- 3.4 RADIO SETTINGS
- 3.5 REACHBACK SETTINGS
- 3.6 FORWARDING SETTINGS
- 3.7 SECURITY
- 3.8 BCADMIN PREFERENCES
- 3.9 MAPPING WITH FUGAWI TRACKER
- 4.0 DEPLOYING THE BREADCRUMB WIRELESS LAN
- 6.0 Troubleshooting
Rajant Corporation XL, XLE, XLV BreadCrumb
®
User Guide
The same information is available in each list. The following figure shows an example listing of BreadCrumb
connections.
Figure 11. Example Listing of BreadCrumb Connections
Tip: Place your mouse over the connection detail in the Info Area to highlight the corresponding line in the
Topology Area.
3.3 CONFIGURING INDIVIDUAL BREADCRUMBS
To configure a specific BreadCrumb device, right-click on the BreadCrumb device in the Topology Area and
choose Properties. A window will appear via which the BreadCrumb device can be configured, with configuration
options grouped by tabs into multiple categories. Each tab and its settings are described in this section.
3.3.1 GENERAL SETTINGS
The ‘General’ tab contains controls for configuring several simple system-wide settings:
- 22 -