Installation Manual

200 Chesterfield Parkway ● Malver n, PA 19 355 ● tel ( 484) 595 -0 2 33 ● f ax (4 84) 595 -0244
www.rajant.com
Certified Power and Antenna Requirements UNII-1
The WLM200N5-26ESD is certified for operation on channels with a 5 MHz channel bandwidth
centered on frequencies 5180 MHz to 5240 MHz. The maximum certified total conducted
average power for 5 MHz channels is 21.8 dBm.
The WLM200N5-26ESD is certified for operation on channels with a 10 MHz channel bandwidth
centered on frequencies 5180 MHz to 5240 MHz. The maximum certified total conducted
average power for 10 MHz channels is 24.1 dBm.
The WLM200N5-26ESD is certified for operation on channels with a 20 MHz channel bandwidth
centered on frequencies 5180 MHz to 5240 MHz. The maximum certified total conducted
average power for 20 MHz channels is 26.0 dBm.
The WLM200N5-26ESD is certified for operation on channels with a 40 MHz channel bandwidth
centered on frequencies 5190 MHz to 5230 MHz. The maximum certified total conducted
average power for 10 MHz channels is 21.7 dBm.
The channel plan was certified with a 6dBi omni directional antenna system. Wireless
compliance of host equipment using the Rajant WLM200N5-26ESD radio module is dependent
on operation using the same antenna type and gain, at the certified transmitter power levels.
The module is approved for use in mobile and portable applications. Operation in fixed base
stations also permitted, provided that operation is at the same certified power level and EIRP as
the mobile / portable configuration.
Certified Power and Antenna Requirements UNII-3
The WLM200N5-26ESD is certified for operation on channels with a 20 MHz channel bandwidth
centered on frequencies 5745 MHz to 5825 MHz. The maximum conducted (average) output
power for 20 MHz channels is 22.4 dBm.
The WLM200N5-26ESD is certified for operation on channels with a 40 MHz channel bandwidth
centered on frequencies 5755 MHz to 5795 MHz. The maximum conducted (average) power for
40 MHz channels is 21.4 dBm.
The channel plan was certified with a 6dBi omni directional antenna. Wireless compliance of
host equipment using the Rajant WLM200N5-26ESD radio module is dependent on operation
using the same antenna type and gain, at the certified transmitter power levels.
The module is approved for use in mobile and portable applications. Operation in fixed base
stations also permitted, provided that operation is at the same certified power level and EIRP as
the mobile / portable configuration.