User's Manual
Table Of Contents
- 1.0 PREFACE
- 2.0 INTRODUCTION
- 3.0 USING BCADMIN™
- _
- 3.1 SCREEN LAYOUT
- 3.2 ANATOMY OF A CONNECTION LINE
- 3.3 CONFIGURING THE BREADCRUMB
- 3.4 RADIO SETTINGS
- 3.5 REACHBACK SETTINGS
- 3.6 FORWARDING SETTINGS
- 3.7 SECURITY
- 3.8 BCADMIN PREFERENCES
- 3.9 MAPPING WITH FUGAWI TRACKER
- 4.0 DEPLOYING THE BREADCRUMB WIRELESS LAN
- 6.0 Troubleshooting
Rajant Corporation ME BreadCrumb User Guide
- 40 -
connectivity is restored for this BreadCrumb is most likely the farthest point in
this direction at which you will be able to place this BreadCrumb.
15. Repeat steps 11 thru 14 until the BCWL has been deployed.
4.6.3 BITE LED
The LED function on the BreadCrumb indicates the current status of the BreadCrumb. The LED has
three colors: Red, Blue and Green. Their color code indicators are given in the table below:
Table 3. LED Color Status
Color Status
SOLID RED Booting
BLINKING RED Error
SOLID BLUE Ready, but no peers
SOLID GREEN At least one 11Mbit peer
BLINKING GREEN At least one peer
Note: The default state of the LED after a power reset is off and the LED turns on/off when the status button is
pressed.