User's Manual
Table Of Contents
- 1.0 PREFACE
- 2.0 INTRODUCTION
- 3.0 USING BCADMIN™
- _
- 3.1 SCREEN LAYOUT
- 3.2 ANATOMY OF A CONNECTION LINE
- 3.3 CONFIGURING THE BREADCRUMB
- 3.4 RADIO SETTINGS
- 3.5 REACHBACK SETTINGS
- 3.6 FORWARDING SETTINGS
- 3.7 SECURITY
- 3.8 BCADMIN PREFERENCES
- 3.9 MAPPING WITH FUGAWI TRACKER
- 4.0 DEPLOYING THE BREADCRUMB WIRELESS LAN
- 6.0 Troubleshooting
Rajant Corporation ME BreadCrumb User Guide
3.3.1.5. IMCrypto Encryption: AES-256 and Set Access ID IMCrypto encryption is not available on the ME
BreadCrumb.
3.4 RADIO SETTINGS
The ‘Radios’ tab contains controls for configuring each of the BreadCrumb device’s IEEE 802.11b radios:
Figure 10. BreadCrumb Properties – Radios Tab
The available settings for the radio are:
1. Channel
Channel selection may be automatic as described in the Section called Channel Assignments in
Chapter 3, or radios maybe fixed to specific channels. If one radio is set to use automatic channel selection, so
must all of a BreadCrumb device’s other radios.
Mesh: If this checkbox is checked, the radio will participate in the BreadCrumb mesh.
Access Point: If this checkbox is checked, the radio will provide IEEE 802.11b Access Point
functionality.
Note: BCAdmin will not allow you disable all of the checkboxes on this tab.
- 20 -