User's Guide
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- GNU General Public License Statement
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX4
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX4 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: GNU General Public License
- Appendix C: Using Pole Mount Bracket
Rajant Corporation BreadCrumb
®
LX4 User Guide
03-100117-001 Version: 2.12
Appendix C: Using Pole Mount Bracket
1. Use the supplied four bolts to attach the mounting bracket to the LX4.
2. Use the U-Bolts to attach LX4 Pole Mount Bracket to a pole.
3. Tighten the four (4) nuts on the two (2) U-Bolts to secure the LX4 assembly to the pole.
C-1
Figure 8: LX4 Pole Mount Bracket with U-Bolts.