User's Guide
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- GNU General Public License Statement
- Copyright Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb LX4
- 3 Using BC|Commander
- 4 Deploying the BreadCrumb Wireless Network
- 5 BreadCrumb LX4 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: GNU General Public License
- Appendix C: Using Pole Mount Bracket
Rajant Corporation BreadCrumb
®
LX4 User Guide
03-100117-001 Version: 2.12
● Release the switch. The Status LED should change to display the blinking red error code 32.
See Appendix A for a description of the blinking red color sequence. The BreadCrumb will
then reboot using the factory default configuration.
Warning
Do NOT turn off power or reboot a BreadCrumb that is being zeroized. An
interruption to power during the zeroization process may result in the BreadCrumb
being unable to boot properly.
Tip
The process of zeroizing keys and restoring factory defaults can also be performed
remotely from within the BC|Commander management software. For details on this
alternative method, refer to the BC|Commander User Guide.
17