User's Manual
Table Of Contents
- FCC Compliance Statements
- IC Compliance Statements
- Copyright Statement
- Preface
- 1 Introduction
- 2 Using BC|Commander
- 3 Deploying the BreadCrumb Wireless Network
- 4 BreadCrumb USB Firmware Upgrade
- 5 Troubleshooting
- Appendix A: Error and Warning Codes
BreadCrumb
®
LX4 User Guide Rajant Corporation
Version: 1.04 03-100117-001
Battery Gas Gauge Codes (6*)
61 – Battery gas gauge i2c device could not be found.
62 – Incorrect gas gauge revision 1 EEPROM settings.
63 – Incorrect gas gauge revision 2 EEPROM settings.
64 – Incorrect gas gauge revision 3 EEPROM settings.
65 – Unknown gas gauge revision.
66 – Incorrect ME3 gas gauge revision 0 EEPROM settings.
67 – Internal battery charger disabled.
Other Codes (7*)
71 – Host flapping detected.
72 – Critical I2C failure.
A-4