User's Manual
Table Of Contents
- Preface
- 1 Introduction
- 2 Using BC|Commander or BCAdmin
- 3 Deploying the BreadCrumb Wireless Network
- 4 BreadCrumb LX/LX3 USB Firmware Upgrade
- 5 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
BreadCrumb
®
LX/LX3 User Guide Rajant Corporation
Version: 2.8 03-100101-001
occurs, note the new error code and then apply for technical support.
7. When complete, turn off power and remove USB storage device.
Note
An alternative method of upgrading the firmware of a BreadCrumb LX/LX3 is
explained in the BC|Commander/BCAdmin user guide. This method, called Over
The Air (OTA) firmware upgrade, offers the convenience of remote and completely
software controlled firmware upgrades.
24