User's Manual

BreadCrumb
®
LX/LX3 User Guide Rajant Corporation
Version: 2.94 03-100101-001
Table 7: Status LED Color Codes.
Color Status
White
(red, green and blue LEDs together;
may appear pale blue or pale green)
Powered, prior to Booting
Solid Red Booting
Blinking Red
1
Error
Solid Blue Ready, but no peers
Solid Green At least one 24 Mbps or higher peer
Blinking Green At least one peer
Blinking Yellow
(at a constant rate)
Progress
Blinking Yellow
1
(with short and long pauses between blinks)
Warning
All Status LED colors scrolling in succession Success/Completion
(&&? 5#@AB:%#"
/% 
The LED Configuration / Zeroize Keys and Restore Factory Defaults Switch (see ) has two modes of
operation. The modes are set by the length of time the switch is asserted. The modes are:
● LED Configuration
● Zeroize Keys and Restore Factory Defaults
1.3.6.1 LED Configuration
This mode is used to control the default and alternate display states of the Status LED. The LED
Configuration function is accessed by pressing the switch and releasing it after a two second hold.
The default display state of the Status LED is dictated by the LED Mode setting that is configured
from BC|Commander (please refer to the BC|Commander User Guide for a more detailed description
of the LED mode setting). The user can toggle between the default state and an alternate state of the
Status LED by pressing the switch and activating the LED Configuration function.
Table 8 illustrates the possible default and alternate display states of the Status LED.
1 For a list of error and warning codes refer to Appendix A at the end of this document.
12