User's Manual
Table Of Contents
- FCC and IC Statements
- Copyright Statement
- Preface
- 1 Introduction
- 2 Using BC|Commander
- 3 Deploying the BreadCrumb Wireless Network
- 4 BreadCrumb USB Firmware Upgrade
- 5 Troubleshooting
- Appendix A: Error and Warning Codes
- Appendix B: Using Pole Mount Bracket
Rajant Corporation BreadCrumb
®
LX/LX3 User Guide
03-100101-001 Version: 2.94
-
In order to avoid sparking and possible damage to the unit, be sure to connect the
powered Ethernet cable to the BreadCrumb LX/LX3 before applying power to the
power supply.
(&&, 5
The Status LED is capable of displaying alerts, error codes, and link states. The LED Mode can be
configured in BC|Commander to be ON, OFF, or ALERTS ONLY. When the LED is ON, errors,
warnings, and link status are displayed. When the LED is OFF, errors, warnings, and link states are
not displayed. When the LED is set for ALERTS ONLY mode, the LED will alternate between
displaying the warning or error code and the mesh status.
The Status LED combines the three base colors of red, green and blue to display a broader spectrum
of colors which indicate the current status of a BreadCrumb. The meanings of the color code
indicators are given in Table 7.
11
Figure 5: BreadCrumb LX/LX3 Ethernet and Passive PoE Connections.