User's Manual

Rajant Corporation BreadCrumb
®
LX User Guide
Version 1.06 June 25, 2008
- 22 -
4.6 DEPLOYMENT GUIDELINES AND METHODOLOGY (continued)
10. Determine the approximate location for the next BreadCrumb.
11. Power ON the device.
12. Wait for it to appear in BCAdmin.
4.7 STATUS LED
The LED function on the BreadCrumb indicates the current status of the BreadCrumb. The LED has three colors:
Red, Blue and Green. Their color code indicators are given in the table below:
Table 1. LED Color Status
Color Status
SOLID RED Booting
BLINKING RED* Error
SOLID BLUE Ready, but no peers
SOLID GREEN At least one 24 MBit or higher peer
BLINKING GREEN At least one peer
BLINKING YELLOW (at a constant rate) Progress
BLINKING YELLOW (with short and long pauses between blinks)* Warning
All LED colors scrolling in succession Success/Completion
* Refer to Appendix A at the end of this document, for a list of error codes.
Note: The default state of the LED after a power reset is off and the LED turns on/off when the status button is
pressed.