User's Guide
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a commercial environment. This device
generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with this instruction manual, may cause harmful interference to radio communications. Operation of
this device in a residential area is likely to cause harmful interference in which case the user will be
requiredtocorrecttheinterferenceat
theirownexpense.
Antennas
Antenna Installation WARNING
TheBreadCrumbCX1shipswith2dBiomni‐directionalantennas.SARComplianceoftheBreadCrumb
CX1iscontingentontheuseoftheseantennas.
IMPORTANT: Exposure to Radio Frequency Radiation
To satisfy FCC SAR RF exposure requirements for a body‐worn device, the belt‐clip must be used
whenwearingtheBreadCrumbCX1.Thebeltclipis
showninthisfigure:BreadCrumbCX1Enclosure
Features(Back)
Maximum Certified Transmit Power
SARcomplianceiscontingentonoperationofthewirelesstransmitteratcertifiedpowerlevels.
Safety
Warning
The BreadCrumb CX1 is not user serviceable. Repair must be performed at a Rajant designated
servicecenterbytrainedpersonnel.
Warning
The BreadCrumb CX1 single board computer assembly contains a Lithium button cell battery.
Replacementofthisbatteryshouldneverbeattemptedbytheuser.Thebatterymustbereplacedby
authorized
repair personnel trained by Rajant Corporation. CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used batteries according to the battery manufacturer’s
instructions.
Modifications
CAUTION
Changes or modifications not expressly approvedby Rajant Corp. could void the user’s authority to
operatetheequipment.