User's Guide
Warning
If it is necessary to service the antennas, to avoid possible damage to the BreadCrumb radio(s),
always connect or disconnect external antennas with the power to the BreadCrumb CX1 turned off.
2.4 etherCON Connector
The etherCON connector of the BreadCrumb CX1 provides Ethernet and also outputs 500 mA of current
at the voltage of the removeable rechargeable battery. The etherCON connector’s power is required by
the Green Go beltpack.
Warning
The output power on the CX1 etherCON connector may damage normal Ethernet ports on laptops
and other devices. When connecting the CX1 etherCON to any device other than the Green Go
beltpack, a customized Ethernet cable with no power lines must be used.
Figure: BreadCrumb CX1 Enclosure (Bottom
)