User manual
Table Of Contents
- 1. Introduction
- 2. Raisonance tools for ARM overview
- 3. How to register the new Raisonance tools for ARM
- 4. Creating a project
- 5. Debugging with the simulator
- 6. Debugging with hardware tools
- 6.1 Selecting hardware debugging tools
- 6.2 RLink-ARM programming and debugging features
- 6.3 JTAGjet programming and debugging features
- 6.4 Cortex Serial Wire Viewer (SWV) debugging features (Open4 RLink only)
- 6.4.1 Introduction
- 6.4.2 Hardware requirements
- 6.4.3 Configure Ride7 to use the SWV
- 6.4.4 Modify your application to use SWV software traces
- 6.4.5 Configure Ride7 to use SWV software traces
- 6.4.6 Configuring Ride7 to use the SWV hardware traces
- 6.4.7 Configuring Ride7 to use the SWV watchpoint traces
- 6.4.8 Start / Stop the trace
- 6.4.9 Visualizing SWV traces with Ride7
- 7. Raisonance solutions for ARM upgrades
- 8. Conformity
- 9. Glossary
- 10. Index
- 11. History
Raisonance Tools for ARM 3. How to register the new Raisonance tools for ARM
3. How to register the new Raisonance tools for ARM
The new Ride7 and RKit-ARM must be registered to operate correctly. Registration requires a
Raisonance hardware product or software product license that is under a valid support contract (a
standard support contract expires one year after the date of purchase).
Products that allow activation of RKit-ARM include the RKit-ARM license (Serial number or Dongle)
and RLink (RLink-STD, RLink-PRO, REva starter kits, Primers).
Unregistered software functions for a 7-day evaluation period with full features of the Enterprise
version. After 7 days the software can no longer be used. If this occurs, contact info@raisonance.com.
3.1 Install the new software
Perform these steps to install your new software:
1. Remove old versions of Ride7 and RKits.
2. Install the new Ride7 software, then the RKit-ARM software, then validate its operation (test
compilation, connection to RLink and to target CPU, etc.).
3. Launch Ride7 and select Help > License. Activate your software by providing:
a. Software serial number (purchasers of RKit-xxx-Enterprise or RKit-xxx-Lite tool sets).
b. Hardware dongle (purchasers of RKit-xxx-Enterprise or RKit-xxx-Lite tool sets).
c. RLink serial number (purchasers of RLink, REva, or a Raisonance Primer).
4. Register the software by selecting the menu item Help > License...
Note: During the registration process, you will be notified if your product's support contract has expired.
This notification includes information about how to renew your tool's support contract
3.2 Register using a serial key
You must use this procedure for:
• Old RLink, REva, or Primers (serial number prior to dngXXXXXX18000).
• RLink-STD, REva or Primers purchased more than one year ago, that have been upgraded to
"Pro".
• RKit-ARM-Enterprise software licenses (Serial Number or Dongle).
If your product was purchased:
• less than one year ago, you will need to provide your proof of purchase.
• more than one year ago, you will need to purchase the (annual) support extension.
Perform these steps to register using a serial key:
1. Contact Raisonance (info@raisonance.com) to obtain a Serial Key. They need your Software or
RLink Serial Number (For RLink, click Connect to RLink in RFlasher7 or Ride7 debug
options).
2. Log on as admin, ensure you have internet access, a working default browser and a working
email address.
3. Open Ride7 or RFlasher7. If it does not open automatically, click Help->About Ride7.
4. Click the Change License button. Select the Serial Activation method, click Next.
5. Enter the Serial Key provided to you. Click Next.
6. Connect to the internet and click Get Activation code online to open your browser on the
Raisonance server.
7. Fill in the form and click Generate and Send Activation code.
- 9 -