User manual
Table Of Contents
- 1. Introduction
- 2. Raisonance tools for ARM overview
- 3. How to register the new Raisonance tools for ARM
- 4. Creating a project
- 5. Debugging with the simulator
- 6. Debugging with hardware tools
- 6.1 Selecting hardware debugging tools
- 6.2 RLink-ARM programming and debugging features
- 6.3 JTAGjet programming and debugging features
- 6.4 Cortex Serial Wire Viewer (SWV) debugging features (Open4 RLink only)
- 6.4.1 Introduction
- 6.4.2 Hardware requirements
- 6.4.3 Configure Ride7 to use the SWV
- 6.4.4 Modify your application to use SWV software traces
- 6.4.5 Configure Ride7 to use SWV software traces
- 6.4.6 Configuring Ride7 to use the SWV hardware traces
- 6.4.7 Configuring Ride7 to use the SWV watchpoint traces
- 6.4.8 Start / Stop the trace
- 6.4.9 Visualizing SWV traces with Ride7
- 7. Raisonance solutions for ARM upgrades
- 8. Conformity
- 9. Glossary
- 10. Index
- 11. History
Raisonance Tools for ARM 11. History
11. History
Date Description
January 2009 Initial version
June 2010 Added SWV
Increase debug limit up to 64Kb
October 2010 Corrections in the list of derivatives.
March 2011 Completed SWV with DWT and watchpoints.
Corrected RAM boot mode information.
June 2011 Added generic compiler interface, new licensing/registering process.
September 2011 Documented the Phyton Compiler interface.
- 47 -
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment
on the part of the manufacturer. The software described in this document is provided under license and
may only be used or copied in accordance with the terms of the agreement. It is illegal to copy the
software onto any medium, except as specifically allowed in the license or nondisclosure agreement.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and retrieval systems, for any
purpose other than the purchaser’s personal use, without prior written permission.
Every effort has been made to ensure the accuracy of this manual and to give appropriate credit to
persons, companies and trademarks referenced herein.
This manual exists both in paper and electronic form (pdf).
Please check the printed version against the .pdf installed on the computer in the installation directory,
for the most up-to-date version.
The examples of code used in this document are for illustration purposes only and accuracy is not
guaranteed. Please check the code before use.
Copyright © Raisonance 1987-2011 All rights reserved