User manual
Table Of Contents
- 1. Introduction
- 2. Raisonance tools for ARM overview
- 3. How to register the new Raisonance tools for ARM
- 4. Creating a project
- 5. Debugging with the simulator
- 6. Debugging with hardware tools
- 6.1 Selecting hardware debugging tools
- 6.2 RLink-ARM programming and debugging features
- 6.3 JTAGjet programming and debugging features
- 6.4 Cortex Serial Wire Viewer (SWV) debugging features (Open4 RLink only)
- 6.4.1 Introduction
- 6.4.2 Hardware requirements
- 6.4.3 Configure Ride7 to use the SWV
- 6.4.4 Modify your application to use SWV software traces
- 6.4.5 Configure Ride7 to use SWV software traces
- 6.4.6 Configuring Ride7 to use the SWV hardware traces
- 6.4.7 Configuring Ride7 to use the SWV watchpoint traces
- 6.4.8 Start / Stop the trace
- 6.4.9 Visualizing SWV traces with Ride7
- 7. Raisonance solutions for ARM upgrades
- 8. Conformity
- 9. Glossary
- 10. Index
- 11. History
Raisonance Tools for ARM 9. Glossary
9. Glossary
Term Description
SWD Serial Wire Debugger
JTAG Joint Test Action Group (or "IEEE Standard 1149.1"). A standard specifying how to
control and monitor the pins of compliant devices on a printed circuit board.
Ride7 Raisonance integrated development environment
ETM Embedded Trace Macrocell
ARM Advanced RISC Machine
RLink Raisonance’s in-circuit debugging and programming tool
REva Raisonance's universal evaluation board
STR7 STMicroelectronics 32-bit microcontroller family with ARM7 RISC 32-bit CPU core
STR9 STMicroelectronics 32-bit microcontroller family with ARM966E-S CPU core
STM32 STMicroelectronics 32-bit Flash microcontrollers with ARM Cortex™-M3 core
LPC NXP microcontrollers, some of them including an ARM7 RISC 32-bit CPU core
SWV Serial Wire Viewer
- 45 -