User manual

www.raisecom.com User Manual
3
Chapter 2 Parameters
This section contains the following information:
 Basic Configuration
 Optical Port Characteristic
 E1 Port Characteristic
 Fast Ethernet Port Characteristic
 PC Agent Network Management
 V.35 Interface Characteristic
 Power Supply
 Ambience
 Dimension & Weight
Basic Configuration
The device’s basic configuration is as below:
¾ 2 optical ports, 4/8/16 E1 interfaces, one Fast Ethernet port and one extend slot for V.35 card;
¾ Power supply: 220VAC, -48VDC and +24VDC;
¾ Management port: PC Agent port.
Optical Port Characteristic
¾ Rate: 150Mbps;
¾ Line Code: NRZ plus scrambling code
¾ Optical port mode: SC connector ( FC connector can be optional)
E1 Port Characteristic
¾ Bit rate: 2048Kbps±50ppm
¾ Line code: HDB3
¾ Impedance of interface: 75Ω (unbalanced BNC interface) or 120Ω (balanced RJ-45
interface)
¾ Electrical characteristics: complies with ITU-T G.703
¾ Jitter Transfer characteristics: complies with ITU-T G.823
¾ Input jitter tolerance: complies with ITU-T G.823
Fast Ethernet Port Characteristic
¾ Port Type: RJ45;
¾ Complied with IEEE802.3 standard;
¾ 10/100 auto-negotiation;
¾ MDX/MDIX auto-negotiation.
PC Agent Network Management Port Characteristic
¾ Port Type: RJ45;
¾ Complied with RS232 standard;
¾ Baud Rate: 19200bps.